Dotco 14CSL97-51 Non-Reversible Pneumatic Drill | 14CS Series | 0.6 HP | 500 RPM | 3/8" Chuck

Built for controlled drilling and hole-making operations where low spindle speed and steady pneumatic power are required, the Dotco 14CSL97-51 Non-Reversible Pneumatic Drill combines a 0.6 HP air motor with a 500 RPM free speed and 3/8" chuck. The lower-speed configuration supports controlled drilling in applications where higher spindle speeds may generate excessive heat or reduce tool control, while the keyed chuck accepts compatible drill bits and accessories within its stated capacity.

Part of the 14CS Series, this pneumatic drill uses a non-reversible configuration for straightforward forward drilling operations. Its combination of moderate power, low operating speed, and common 3/8-inch chuck capacity makes it a practical choice for production drilling, fabrication work, assembly operations, and maintenance tasks that require repeatable pneumatic tool performance.

Type: Non-Reversible Pneumatic Drill | Series: 14CS Series | Model: 14CSL97-51 | Power: 0.6 HP | Free Speed: 500 RPM | Chuck Capacity: 3/8"

Features:

• 0.6 HP pneumatic motor provides power for controlled drilling and hole-making operations.
• 500 RPM free speed supports lower-speed drilling applications where controlled spindle speed is preferred.
• 3/8-inch chuck accepts compatible drill bits and accessories within the chuck capacity.
• Non-reversible operation provides a straightforward forward-drilling configuration.
• 14CS Series configuration supports use in production, fabrication, assembly, and maintenance environments.
• Pneumatic power eliminates batteries and electrical motors at the tool, supporting workstations equipped with a properly sized compressed-air supply.

Made in USA:

Applications:

• Production drilling and assembly operations requiring a low-speed pneumatic drill.
• Metal fabrication work involving controlled drilling with compatible 3/8-inch chuck tooling.
• Industrial maintenance and MRO tasks performed at workstations supplied with compressed air.
• Fixture, machinery, and equipment assembly where forward-only drilling operation is suitable for the process.
• Workshop drilling tasks that benefit from a 500 RPM spindle speed and pneumatic power source.

FAQs:

• Q: What size drill bits can the Dotco 14CSL97-51 accept?
  A: The drill is equipped with a 3/8-inch chuck. Drill bits and other compatible accessories must fit within the chuck's stated capacity.
• Q: Is the Dotco 14CSL97-51 reversible?
  A: No. This model has a non-reversible configuration and operates in the forward direction for drilling applications.
• Q: What types of jobs benefit from the 500 RPM free speed?
  A: The lower free speed is useful for controlled drilling tasks where excessive spindle speed is undesirable. Actual drilling performance depends on the workpiece material, drill bit size, tooling, and air supply conditions.
• Q: What air compressor is required to operate this pneumatic drill?
  A: The compressor and air delivery system should be sized according to the manufacturer's air-consumption, operating-pressure, air-inlet, and minimum-hose specifications. Those values should be confirmed from the Dotco catalog data before selecting the air supply system.

Looking for more information about Dotco Drill? Click here to view the Catalog

Need help selecting the correct Dotco Drills for your application? Please call (800) 608-5210 or email info@intlairtool.com