Built for compact sanding, surface blending, and finishing work in tight areas, the Dotco 12LF200-32 Right Angle Sander combines a 0.4 HP pneumatic motor with a 12,000 RPM free speed for controlled abrasive performance. Its right-angle layout improves access around fixtures, inside assemblies, and along contoured surfaces, while the 1/4" collet supports compatible sanding accessories for detail finishing and material cleanup.
Part of the 12LF Series, this composite-housing sander is a lightweight option for production finishing, aerospace work, metal fabrication, and industrial maintenance where a straight tool is difficult to position. The front exhaust directs air forward from the tool, making this model a practical choice when exhaust direction and visibility around the workpiece matter.
Type: Pneumatic Right Angle Sander | Series: 12LF Series | Power: 0.4 HP | Free Speed: 12,000 RPM | Collet Size: 1/4" | Housing: Composite | Exhaust: Front | Air Inlet: 1/4" | Minimum Hose I.D.: 1/4" | Rated Pressure: 90 PSI
Features:
- 0.4 HP pneumatic motor supports controlled sanding, blending, and finishing tasks.
- 12,000 RPM free speed provides smooth abrasive action with compatible sanding accessories.
- Right-angle head improves access in corners, recessed areas, and around production fixtures.
- Composite housing helps reduce tool weight during repetitive finishing operations.
- Front exhaust directs discharged air forward from the tool.
- 1/4" collet accepts compatible shank-mounted sanding accessories.
- Compact 12LF Series layout helps maintain control during detail work.
- Supplied with angle-head grease and grease gun for routine maintenance.
Made in USA: 
Applications:
- Aerospace and composite finishing where access and tool control are important.
- Metal fabrication shops blending edges, preparing surfaces, and cleaning tight areas.
- Industrial production stations performing repeat sanding and surface prep work.
- Maintenance teams finishing repaired brackets, housings, and fabricated components.
- General shop use with compatible 1/4" shank sanding accessories.
FAQs:
- Q: What type of sanding accessories does this tool use?
A: This sander uses compatible 1/4" shank-mounted sanding accessories. Always confirm accessory speed rating and fit before use. - Q: Is this the same as a random orbital sander?
A: No. This is a right angle collet-style sander for shank-mounted accessories, not a random orbital pad sander. - Q: Why choose a right-angle sander?
A: A right-angle configuration helps reach recessed surfaces, inside assemblies, and areas where a straight tool or larger pad sander cannot fit comfortably. - Q: What does front exhaust mean?
A: Front exhaust means discharged air exits toward the front of the tool instead of the rear.
| SKU | Collet Size | Exhaust | Free Speed r/min |
Abrasive Capacity Grinder | Abrasive Capacity Sander | Spindle Size | Weight Lb |
Length in |
Head Height in |
Air Inlet Size in |
|---|---|---|---|---|---|---|---|---|---|---|
| 12LF280-32 | 1/4 in-28i | Rear | 12000 | 1/2“ Carbide Burr, 1“ Mounted Wheel | 3“ (75 mm) Sanding/Polishing disc | 1/4“-28 | 1.1 | 6.6 | 2.70 | 1/4 in |
| 12LF280-32OH | 1/4 in-28i | Rear | 12000 | 1/2“ Carbide Burr, 1“ Mounted Wheel | 3“ (75 mm) Sanding/Polishing disc | 1/4“-28 | 1.1 | 6.6 | 2.70 | 1/4 in |
| 12LF281-32 | 1/4 in-28i | Rear | 20000 | 1/2“ Carbide Burr, 1“ Mounted Wheel | 2“ (50 mm) Sanding/Polishing disc | 1/4“-28 | 1.1 | 6.6 | 2.70 | 1/4 in |
| 12LF281-32OH | 1/4 in-28i | Rear | 20000 | 1/2“ Carbide Burr, 1“ Mounted Wheel | 2“ (50 mm) Sanding/Polishing disc | 1/4“-28 | 1.1 | 6.6 | 2.70 | 1/4 in |
| 12LF200-36 | 1/4 in | Front | 12000 | 1/2“ Carbide Burr, 1“ Mounted Wheel | 3“ (75 mm) Sanding/Polishing disc | 1.1 | 6.6 | 2.70 | 1/4 in | |
| 12LF200-36M6 | 1/4 in | 6mm | Front | 12000 | 1/2“ Carbide Burr, 1“ Mounted Wheel | 3“ (75 mm) Sanding/Polishing disc | 1.1 | 6.6 | 2.70 | 1/4 in | |
| 12LF201-36 | 1/4 in | Front | 20000 | 1/2“ Carbide Burr, 1“ Mounted Wheel | 2“ (50 mm) Sanding/Polishing disc | 1.1 | 6.6 | 2.70 | 1/4 in | |
| 12LF201-36M6 | 1/4 in | 6mm | Front | 20000 | 1/2“ Carbide Burr, 1“ Mounted Wheel | 2“ (50 mm) Sanding/Polishing disc | 1.1 | 6.6 | 2.70 | 1/4 in | |
| 12LF280-36 | 1/4 in | Rear | 12000 | 1/2“ Carbide Burr, 1“ Mounted Wheel | 3“ (75 mm) Sanding/Polishing disc | 1.1 | 6.6 | 2.70 | 1/4 in | |
| 12LF280-36M6 | 1/4 in | 6mm | Rear | 12000 | 1/2“ Carbide Burr, 1“ Mounted Wheel | 3“ (75 mm) Sanding/Polishing disc | 1.1 | 6.6 | 2.70 | 1/4 in | |
| 12LF280-36M6OH | 1/4 in | 6mm | Rear | 12000 | 1/2“ Carbide Burr, 1“ Mounted Wheel | 3“ (75 mm) Sanding/Polishing disc | 1.1 | 6.6 | 2.70 | 1/4 in | |
| 12LF281-36 | 1/4 in | Rear | 20000 | 1/2“ Carbide Burr, 1“ Mounted Wheel | 2“ (50 mm) Sanding/Polishing disc | 1.1 | 6.6 | 2.70 | 1/4 in | |
| 12LF281-36M6 | 1/4 in | 6mm | Rear | 20000 | 1/2“ Carbide Burr, 1“ Mounted Wheel | 2“ (50 mm) Sanding/Polishing disc | 1.1 | 6.6 | 2.70 | 1/4 in | |
| 12LF281-36M6OH | 1/4 in | 6mm | Rear | 20000 | 1/2“ Carbide Burr, 1“ Mounted Wheel | 2“ (50 mm) Sanding/Polishing disc | 1.1 | 6.6 | 2.70 | 1/4 in | |
| 12LF201-32 | 1/4 in-28i | Front | 20000 | 2“ (50 mm) Sanding/Polishing disc | 2“ (50 mm) Sanding/Polishing disc | 1.1 | 6.6 | 2.70 | 1/4 in | |
| 12LF200-32 | 1/4 in-28i | Front | 12000 | 3“ (75 mm) Sanding/Polishing disc | 3“ (75 mm) Sanding/Polishing disc | 1.1 | 6.6 | 2.70 | 1/4 in | |
| 12LF280-27 | 3/8 in-24e | Rear | 12000 | 3“ (75 mm) Sanding/Polishing disc | 3“ (75 mm) Sanding/Polishing disc | 1.1 | 6.6 | 2.70 | 1/4 in |
Looking for more information about Dotco Sander? Click here to view the Catalog
Need help selecting the correct Dotco Sanders for your application? Please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
