Dotco 12L2682-01 Extended Inline Grinder | 12-26 Series | 0.9 HP | 12,000 RPM | 1/4" Collet | Composite Housing | Rear Exhaust

Built for controlled deburring, blending, and finishing where reach matters, the Dotco 12L2682-01 Extended Inline Grinder pairs a 0.9 HP pneumatic motor with a lower 12,000 RPM free speed for applications that call for measured abrasive control rather than maximum speed. Its extended inline body helps operators reach into recessed features, castings, fabricated assemblies, and machined parts while maintaining straight-line tool control.

Part of the Dotco 12-26 Series, this grinder features a 1/4" collet, composite housing, and rear exhaust. The 1/4" collet accepts compatible rotary accessories such as carbide burrs and mounted points, while rear exhaust directs spent air away from the work surface to help keep the grinding area clearer during precision material removal.

Type: Extended Inline Grinder | Series: 12-26 Series | Model: 12L2682-01 | Power: 0.9 HP | Free Speed: 12,000 RPM | Collet Size: 1/4" | Housing: Composite | Exhaust: Rear

Features:

• Extended inline configuration improves access to recessed areas, internal features, and deeper work zones.
• 0.9 HP motor provides strong pneumatic output for deburring, blending, and finishing tasks.
• 12,000 RPM free speed supports controlled material removal with compatible mounted abrasive accessories.
• 1/4" collet accepts common compatible carbide burrs and mounted points used in die grinding applications.
• Composite housing helps reduce overall tool weight during extended use.
• Rear exhaust directs air away from the workpiece and operator’s immediate work area.
• Inline body layout supports precise two-hand control for detail grinding and finishing work.

Made in USA:

Applications:

• Deburring machined parts, castings, and fabricated metal components.
• Blending welds, smoothing edges, and cleaning hard-to-reach internal areas.
• Finishing molds, dies, fixtures, and production tooling where extended reach is useful.
• Maintenance and repair work in manufacturing, aerospace, metalworking, and MRO environments.
• Controlled carbide burr and mounted point work where a 12,000 RPM grinder is preferred over higher-speed models.

FAQs:

• Q: How does the 12L2682-01 differ from higher-speed extended Dotco grinders?
  A: This model runs at 12,000 RPM, making it better suited for controlled material removal and accessories that require a lower maximum tool speed.
• Q: What does the extended inline design help with?
  A: The longer body helps reach recessed pockets, internal surfaces, and deep work areas that can be difficult to access with a standard-length die grinder.
• Q: What accessories can be used with the 1/4" collet?
  A: Use compatible 1/4" shank carbide burrs, mounted points, and abrasive accessories rated at or above the tool’s maximum speed.
• Q: Why choose rear exhaust?
  A: Rear exhaust routes spent air away from the grinding point, helping reduce disturbance around the work surface during finishing operations.

Looking for more information about Dotco Grinder? Click here to view the Catalog

Need help selecting the correct Dotco Grinders for your application? Please call (800) 608-5210 or email info@intlairtool.com