When paired high-pressure hydraulic hoses require powered retrieval without an electric motor, the Coxreels 1275HPL-D-8-A provides a compressed-air motor rewind solution for dual hydraulic hose management. This 1275HP Series reel is configured for 1/4" I.D. hose with 135 ft hose capacity and a 10,000 PSI maximum pressure rating, giving rescue equipment teams, maintenance crews, and hydraulic tool users a way to store two hose lines on one reel. The air motor rewind uses compressed air to power hose retrieval, which can be useful where pneumatic service is already available or where an electric rewind motor is not preferred.
Built for dual hydraulic emergency rescue systems and other high-pressure hydraulic tools, the 1275HPL-D-8-A uses two high-pressure 90° full-flow melanized steel 1/4" swivel inlets with VITON swivel seals. VITON is a fluoroelastomer seal material commonly used where hydraulic fluid resistance and pressure capability are important. Two low-profile outlet risers and an open drum slot help support a flat, smooth hose wrap. In contrast, the welded steel "A" frame, ribbed discs, rolled edges, and permanently lubricated pillow block bearings help the reel operate smoothly in vehicle, shop, and equipment-mounted hydraulic service setups.
*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.
Type: Compressed Air Motor Rewind Hose Reel | Series: 1275HP Series | Configuration: Less Hose | Application: Dual Hydraulics | Outlet Option: D, M14 x 1.5 Female | Hose I.D.: 1/4" | Hose O.D.: 1/2" | Hose Capacity: 135 ft | Max Pressure: 10,000 PSI | Hose Included: No
Features:
- Compressed air motor rewind powers hose retrieval using shop or vehicle air supply, reducing the need for manual winding.
- Dual hydraulic configuration is built for emergency rescue systems and other high-pressure hydraulic tools using paired hose lines.
- Two high-pressure 90° full-flow melanized steel 1/4" swivel inlets help route hydraulic flow into the reel while supporting high-pressure operation.
- VITON swivel seals provide fluid-resistant sealing performance for hydraulic oil applications.
- Two low-profile outlet risers and an open drum slot design help create a flat, smooth hose wrap with reduced crimping during storage.
- CNC-spun ribbed discs with rolled edges add strength, help protect the hose, and improve handling safety around the reel edges.
- One-piece CNC robotically welded 12-gauge steel "A" frame base provides a rigid mounting platform with the mounting pattern located in the steel base.
- Permanently lubricated, self-aligning pillow block bearings support smooth drum rotation during payout and powered rewind.
Made in USA: 
Applications:
- Emergency rescue systems: Managing paired hydraulic hoses used with rescue tools where high-pressure capability and powered hose retrieval are required.
- Hydraulic tool service: Organizing supply and return hose lines for high-pressure hydraulic tools in maintenance bays, test areas, and field service setups.
- Service trucks and mobile units: Mounting powered dual hydraulic hose storage on vehicles equipped with compressed air service.
- Industrial MRO: Keeping hydraulic hoses stored off the floor to reduce clutter, improve access, and limit hose wear around equipment service areas.
- Repair and testing stations: Supporting repeatable hydraulic service workflows where operators need controlled payout and powered rewind without an electric motor.
FAQs:
- Q: What does less hose mean on the 1275HPL-D-8-A?
A: It means the reel is supplied without hose installed. The buyer must provide compatible 1/4" I.D., 1/2" O.D. hydraulic hose separately. - Q: Is this a hand crank hose reel?
A: No. The -A configuration identifies this model as a compressed air motor rewind reel. The title should be reviewed if it currently says Hand Crank Air Motor, because those rewind descriptions conflict. - Q: What does the air motor rewind do?
A: The air motor uses compressed air to power hose retrieval. This reduces manual winding effort and is useful in shops, vehicles, or service areas that already have a suitable air supply. - Q: What does the D outlet option mean?
A: The Coxreels outlet option chart identifies D as M14 x 1.5 Female. Confirm that this outlet style matches the hose ends and hydraulic equipment being used before ordering. - Q: Can this reel be used at 10,000 PSI?
A: Yes, this model is listed with a 10,000 PSI maximum pressure rating. The hose, fittings, adapters, and hydraulic system must also be rated for the pressure used in the application.
| LESS HOSE | SIZE INDEX |
|||||||
|---|---|---|---|---|---|---|---|---|
| LESS HOSE SKU | DESCRIPTION | INLET | OUTLET | CAPACITY 1/4" I.D. |
CAPACITY 3/8" I.D. |
PSI | APRX. LBS |
|
|
1125HP SERIES 10,000 psi - two 1/4" 90° inlets. These reels are an essential component to operate hydraulic tools requiring 10,000 psi can be easily managed safely for efficient use in emergency situations.
|
||||||||
| 1275HPL-D-8 | Rim Rewind | 1/4" | 1/2" | 135' | 85' | 10,000* | 37 | 3 |
| 1275HPL-D-8-C | Geared Crank | 1/4" | 1/2" | 135' | 85' | 10,000* | 43 | 3 |
| 1275HPL-D-8-A | Air Motor | 1/4" | 1/2" | 135' | 85' | 10,000* | 50 | 3 |
| 1275HPL-D-8-E | Electric Motor | 1/4" | 1/2" | 135' | 85' | 10,000* | 68 | 3 |
| 1275HPL-D-12 | Rim Rewind | 1/4" | 1/2" | 200' | 125' | 10,000* | 39 | 4 |
| 1275HPL-D-12-C | Geared Crank | 1/4" | 1/2" | 200' | 125' | 10,000* | 45 | 4 |
| 1275HPL-D-12-A | Air Motor | 1/4" | 1/2" | 200' | 125' | 10,000* | 52 | 4 |
| 1275HPL-D-12-E | Electric Motor | 1/4" | 1/2" | 200' | 125' | 10,000* | 70 | 4 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
