Built for high-pressure dual hydraulic hose management, the Coxreels 1275HPL-C-12-A is a 1275HP Series air motor rewind hose reel with capacity for 200 ft of 1/4" I.D. hose at up to 10,000 PSI. The air motor rewind helps retract long paired hydraulic hose runs with less manual effort than a hand crank reel, making it useful for service trucks, hydraulic rescue systems, equipment maintenance areas, and hydraulic tool circuits where supply and return lines need to be stored together.
This model uses Coxreels’ dual hydraulic configuration with two high-pressure 90° full-flow melanized steel swivel inlets and low-profile outlet risers. The C outlet option indicates 1/4" BSP female outlets, while the less-hose configuration lets the buyer install hose assemblies selected for the system’s pressure rating, fitting style, fluid compatibility, and working environment.
*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.
Type: Dual Hydraulic Hose Reel | Brand: Coxreels | Model: 1275HPL-C-12-A | Series: 1275HP Series | Rewind Type: Air Motor | Configuration: Less Hose | Hose I.D.: 1/4" | Hose O.D.: 1/2" | Hose Capacity: 200 ft | Max Pressure: 10,000 PSI | Outlet Option: C, 1/4" BSP Female | Swivel: Two 90° Full-Flow Melanized Steel Inlets | Seal Type: Viton | Overall Dimensions: 23.25" W x 19.13" H x 17.63" L | Mounting Pattern: 15.44" x 10" | Base Size: 17.38" x 16" | Ship Weight: 52 lbs
Features:
- Air motor rewind assists hose retrieval on long hydraulic hose runs where manual cranking may slow down the job.
- Dual hydraulic reel layout stores paired hose lines together for supply and return circuits on compatible hydraulic tools.
- Two high-pressure 90° full-flow melanized steel swivel inlets help maintain fluid routing through both hydraulic lines.
- Viton seals support high-pressure hydraulic service where seal material compatibility matters.
- Two low-profile outlet risers and an open drum slot help create a smoother, flatter hose wrap during rewind.
- All-welded steel “A” frame construction adds rigidity for vehicle, bench, or equipment-area mounting.
- Rolled edges and ribbed discs strengthen the reel while helping protect hose during payout and rewind.
- Permanently lubricated self-aligning pillow block bearings support smooth drum rotation with fewer routine lubrication points.
Made in USA: 
Applications:
- Fire and rescue vehicle installations using paired hydraulic hose lines for compatible rescue tool systems.
- Mobile service trucks where air-assisted rewind helps manage long hydraulic hose runs after field repairs.
- Industrial maintenance shops using high-pressure hydraulic tools for equipment service and component removal.
- Construction, mining, and railroad maintenance areas where hydraulic hose storage must stay organized around large machinery.
- Fleet and garage environments that require a less-hose reel so hose assemblies can be selected to match existing fittings and fluid requirements.
FAQs:
- Q: Is the 1275HPL-C-12-A a hand crank reel?
A: No. The A rewind option on this model indicates air motor rewind. If a manual geared crank version is required, verify the correct Coxreels model suffix before ordering. - Q: What does less hose mean?
A: It means the reel is supplied without hose installed. The buyer must provide compatible 1/4" I.D. hydraulic hose separately and confirm the pressure rating, fittings, and fluid compatibility before use. - Q: What does the C outlet option mean?
A: The C outlet option indicates 1/4" BSP female outlets. Confirm that BSP fittings match your hose assemblies or adapters before placing the order. - Q: Why choose air motor rewind instead of hand crank rewind?
A: Air motor rewind reduces the manual effort needed to retrieve long hose runs and can improve workflow on service vehicles or maintenance stations with compressed air available. It is especially helpful when hose length and working pressure make manual handling more demanding. - Q: Can this reel be used for ordinary shop air hose?
A: This reel is configured for dual high-pressure hydraulic service, not standard shop air distribution. For air tools or general shop air, choose a hose reel series matched to air service, hose size, and system pressure.
| LESS HOSE | SIZE INDEX |
|||||||
|---|---|---|---|---|---|---|---|---|
| LESS HOSE SKU | DESCRIPTION | INLET | OUTLET | CAPACITY 1/4" I.D. |
CAPACITY 3/8" I.D. |
PSI | APRX. LBS |
|
|
1125HP SERIES 10,000 psi - two 1/4" 90° inlets. These reels are an essential component to operate hydraulic tools requiring 10,000 psi can be easily managed safely for efficient use in emergency situations.
|
||||||||
| 1275HPL-C-8 | Rim Rewind | 1/4" | 1/2" | 135' | 85' | 10,000* | 37 | 3 |
| 1275HPL-C-8-C | Geared Crank | 1/4" | 1/2" | 135' | 85' | 10,000* | 43 | 3 |
| 1275HPL-C-8-A | Air Motor | 1/4" | 1/2" | 135' | 85' | 10,000* | 50 | 3 |
| 1275HPL-C-8-E | Electric Motor | 1/4" | 1/2" | 135' | 85' | 10,000* | 68 | 3 |
| 1275HPL-C-12 | Rim Rewind | 1/4" | 1/2" | 200' | 125' | 10,000* | 39 | 4 |
| 1275HPL-C-12-C | Geared Crank | 1/4" | 1/2" | 200' | 125' | 10,000* | 45 | 4 |
| 1275HPL-C-12-A | Air Motor | 1/4" | 1/2" | 200' | 125' | 10,000* | 52 | 4 |
| 1275HPL-C-12-E | Electric Motor | 1/4" | 1/2" | 200' | 125' | 10,000* | 70 | 4 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
