When dual hydraulic hose runs need powered retrieval from a fixed reel location, the Coxreels 1275HPL-4-12-E provides an electric motor rewind platform for high-pressure tool systems. This 1275HP Series reel is built for 1/4" I.D. hydraulic hose with 200 ft capacity, 1/2" hose O.D., and a 10,000 PSI maximum pressure rating, giving buyers a hose management option for emergency rescue systems and other hydraulic tools where pressure rating, dual-line routing, and controlled rewind matter.
The dual hydraulic configuration uses two high-pressure 90° full-flow melanized steel swivel inlets to route paired hydraulic lines through the reel. Low-profile outlet risers and an open drum slot help support a flatter hose wrap, while the motor-driven direct gear drive eliminates chain drive components for smoother powered rotation. This model is supplied less hose, allowing the installer to select compatible hose assemblies for the specific hydraulic circuit.
*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.
Type: Dual Hydraulic Motorized Hose Reel | Series: 1275HP Series | Model: 1275HPL-4-12-E | Rewind: Electric Motor | Configuration: Less Hose | Hose I.D.: 1/4" | Hose O.D.: 1/2" | Hose Capacity: 200 ft | Max Pressure: 10,000 PSI | Ship Weight: 70 lbs | Overall Dimensions: 24.25" W x 19.13" H x 17.63" L | Mounting Pattern: 15.44" M x 10" N | Base: 17.38" X x 16" Y | Inlet: Two high-pressure 90° full-flow melanized steel 1/4" swivel inlets | Swivel Seals: VITON
Features:
- Electric motor rewind supports powered hose retrieval where manual rewind is not preferred.
- Built for dual hydraulic emergency rescue systems and other high-pressure hydraulic tools.
- Two high-pressure 90° full-flow melanized steel 1/4" swivel inlets support paired hydraulic line routing.
- VITON swivel seals support use with compatible hydraulic fluids in high-pressure applications.
- Two low-profile outlet risers and open drum slot design help create a flat, smooth hose wrap.
- Reliable direct gear drive on motor-driven models eliminates chain drive components.
- One-piece CNC robotically welded 12-gauge steel A frame base strengthens the reel structure without bolted frame joints.
- CNC-spun ribbed discs with rolled edges add strength, hose protection, and safer handling around the reel.
- Permanently lubricated, self-aligning pillow block bearings support smooth reel rotation with reduced routine bearing attention.
- Chip-resistant and rust-inhibiting CPC powder coat finish helps protect the reel in shop, vehicle, and equipment environments.
Made in USA: 
Applications:
- Emergency rescue hydraulic systems where paired high-pressure hose lines must be stored, deployed, and retrieved from one reel.
- Fire apparatus and rescue vehicle builds that require organized hydraulic hose storage with powered rewind.
- Industrial hydraulic tool stations using dual-line hose assemblies rated for compatible pressure and fluid service.
- Mobile service equipment where electric rewind helps manage long hydraulic hose runs from a mounted reel location.
- Maintenance and utility operations where clean hose payout, compact storage, and controlled retrieval improve jobsite readiness.
FAQs:
- Q: Does the Coxreels 1275HPL-4-12-E include hose?
A: No. This model is supplied less hose, meaning the reel does not include hose installed. The buyer must select compatible 1/4" I.D. hydraulic hose separately. - Q: What does the E suffix mean on this model?
A: The E suffix identifies the electric motor rewind version. This separates it from the air motor A version and geared crank C version in the same 1275HP Series. - Q: What type of hydraulic system is this reel used with?
A: The 1275HP Series is used for dual hydraulic applications, including emergency rescue systems and other high-pressure hydraulic tools. Confirm hose, fittings, fluid compatibility, and working pressure before installation. - Q: Is the reel pressure rating enough to qualify the full hose assembly?
A: No. The reel is rated up to 10,000 PSI, but the complete hose assembly must also be rated for the system pressure. Hose, fittings, adapters, and installation method all need to match the hydraulic circuit. - Q: What installation dimensions should be checked before ordering?
A: Verify the overall size of 24.25" W x 19.13" H x 17.63" L, the 15.44" x 10" mounting pattern, and the 17.38" x 16" base dimensions against the available mounting space.
| LESS HOSE | SIZE INDEX |
|||||||
|---|---|---|---|---|---|---|---|---|
| LESS HOSE SKU | DESCRIPTION | INLET | OUTLET | CAPACITY 1/4" I.D. |
CAPACITY 3/8" I.D. |
PSI | APRX. LBS |
|
|
1125HP SERIES 10,000 psi - two 1/4" 90° inlets. These reels are an essential component to operate hydraulic tools requiring 10,000 psi can be easily managed safely for efficient use in emergency situations.
|
||||||||
| 1275HPL-4-8 | Rim Rewind | 1/4" | 1/2" | 135' | 85' | 10,000* | 37 | 3 |
| 1275HPL-4-8-C | Geared Crank | 1/4" | 1/2" | 135' | 85' | 10,000* | 43 | 3 |
| 1275HPL-4-8-A | Air Motor | 1/4" | 1/2" | 135' | 85' | 10,000* | 50 | 3 |
| 1275HPL-4-8-E | Electric Motor | 1/4" | 1/2" | 135' | 85' | 10,000* | 68 | 3 |
| 1275HPL-4-12 | Rim Rewind | 1/4" | 1/2" | 200' | 125' | 10,000* | 39 | 4 |
| 1275HPL-4-12-C | Geared Crank | 1/4" | 1/2" | 200' | 125' | 10,000* | 45 | 4 |
| 1275HPL-4-12-A | Air Motor | 1/4" | 1/2" | 200' | 125' | 10,000* | 52 | 4 |
| 1275HPL-4-12-E | Electric Motor | 1/4" | 1/2" | 200' | 125' | 10,000* | 70 | 4 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
