When high-pressure hydraulic hose management needs to stay organized around rescue equipment or other dual-line hydraulic tools, the Coxreels 1275HPL-4-12-A provides an air motor rewind solution for controlled hose handling without manual crank operation. This 1275HP Series reel is built for dual hydraulic service with 1/4" I.D. hose capacity up to 200 ft, 1/2" O.D., and a 10,000 PSI maximum pressure rating, giving buyers a compact reel platform for demanding hydraulic circuits where pressure rating, hose length, and outlet configuration must match the tool system.
The air motor rewind helps manage long hose runs from a fixed reel location, while the low-profile outlet risers and open drum slot support a flatter, smoother wrap. Two high-pressure 90° full-flow melanized steel swivel inlets help route dual hydraulic lines through the reel, and VITON swivel seals support use in compatible high-pressure hydraulic applications.
*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.
Type: Dual Hydraulic Motorized Hose Reel | Series: 1275HP Series | Model: 1275HPL-4-12-A | Rewind: Air Motor | Configuration: Less Hose | Hose I.D.: 1/4" | Hose O.D.: 1/2" | Hose Capacity: 200 ft | Max Pressure: 10,000 PSI | Ship Weight: 52 lbs | Overall Dimensions: 23.25" W x 19.13" H x 17.63" L | Mounting Pattern: 15.44" M x 10" N | Base: 17.38" X x 16" Y | Inlet: Two 90° full-flow melanized steel 1/4" swivel inlets | Swivel Seals: VITON
Features:
- Air motor rewind supports powered hose retrieval for long high-pressure hydraulic hose runs.
- Built for dual hydraulic emergency rescue systems and other high-pressure hydraulic tools.
- Two high-pressure 90° full-flow melanized steel 1/4" swivel inlets help route dual hydraulic lines through the reel body.
- VITON swivel seals provide compatibility support for suitable hydraulic fluid applications.
- Two low-profile outlet risers and an open drum slot help promote a flat, smooth hose wrap with reduced hose crowding.
- One-piece CNC robotically welded 12-gauge steel A frame base supports the reel structure without bolted frame joints.
- CNC-spun ribbed discs with rolled edges add hose protection and help improve handling safety around the reel.
- Permanently lubricated, self-aligning pillow block bearings support smooth reel rotation with reduced routine bearing service.
- Direct gear drive on motor-driven models eliminates chain drive components for smooth, quiet rotation.
- Chip-resistant and rust-inhibiting CPC powder coat finish helps protect the reel in shop, fleet, rescue, and equipment environments.
Made in USA: 
Applications:
- Emergency rescue hydraulic systems where paired high-pressure hose lines must be stored and deployed from one reel.
- High-pressure hydraulic tool stations that require organized hose payout and powered rewind from a fixed mounting point.
- Fire and safety vehicles where hose management, compact mounting, and fast equipment readiness are important.
- Industrial hydraulic maintenance areas using dual-line hydraulic tools with compatible hose size and pressure requirements.
- Mobile service and utility equipment builds where air motor rewind is preferred over hand crank retrieval.
FAQs:
- Q: Does the 1275HPL-4-12-A include hose?
A: No. This model is supplied less hose, meaning the reel is provided without hose installed. Select compatible 1/4" I.D. hydraulic hose separately based on pressure rating, length, fittings, and fluid compatibility. - Q: What does the A suffix mean on this Coxreels model?
A: For this model listing, the A suffix identifies the air motor rewind version. This is different from the geared crank version, which uses a -C suffix. - Q: What is this reel used for?
A: The 1275HP Series is used for dual hydraulic applications, including emergency rescue hydraulic systems and other high-pressure hydraulic tools. Always confirm that the hose, fittings, fluid, and working pressure match the hydraulic system before installation. - Q: What pressure is this reel rated for?
A: This SKU is rated for up to 10,000 PSI. The complete hose assembly must also be rated appropriately; the reel pressure rating does not automatically qualify an installed hose or fitting set. - Q: What mounting dimensions should be checked before ordering?
A: Check the overall reel size of 23.25" W x 19.13" H x 17.63" L, the 15.44" x 10" mounting pattern, and the 17.38" x 16" base dimensions against the available installation space.
| LESS HOSE | SIZE INDEX |
|||||||
|---|---|---|---|---|---|---|---|---|
| LESS HOSE SKU | DESCRIPTION | INLET | OUTLET | CAPACITY 1/4" I.D. |
CAPACITY 3/8" I.D. |
PSI | APRX. LBS |
|
|
1125HP SERIES 10,000 psi - two 1/4" 90° inlets. These reels are an essential component to operate hydraulic tools requiring 10,000 psi can be easily managed safely for efficient use in emergency situations.
|
||||||||
| 1275HPL-4-8 | Rim Rewind | 1/4" | 1/2" | 135' | 85' | 10,000* | 37 | 3 |
| 1275HPL-4-8-C | Geared Crank | 1/4" | 1/2" | 135' | 85' | 10,000* | 43 | 3 |
| 1275HPL-4-8-A | Air Motor | 1/4" | 1/2" | 135' | 85' | 10,000* | 50 | 3 |
| 1275HPL-4-8-E | Electric Motor | 1/4" | 1/2" | 135' | 85' | 10,000* | 68 | 3 |
| 1275HPL-4-12 | Rim Rewind | 1/4" | 1/2" | 200' | 125' | 10,000* | 39 | 4 |
| 1275HPL-4-12-C | Geared Crank | 1/4" | 1/2" | 200' | 125' | 10,000* | 45 | 4 |
| 1275HPL-4-12-A | Air Motor | 1/4" | 1/2" | 200' | 125' | 10,000* | 52 | 4 |
| 1275HPL-4-12-E | Electric Motor | 1/4" | 1/2" | 200' | 125' | 10,000* | 70 | 4 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
- Type
- Hand Crank Air Motor Hose Reel
- Series
- 1275HP Series
- Hose Inside Diameter (in.)
- 1/4
- Hose Outside Diameter (in.)
- 1/2
- Hose Length (ft.)
- 200
- Hose Included
- No
- Maximum Working Pressure (PSI)
- 10000
This product hasn't received any reviews yet. Be the first to review this product!
