Coxreels 1275-6-75-C Dual Hose Bevel Gear Hand Crank Hose Reel | 1275 Series | 1" Hose Diameter | 2/75' Hose Length | 3000 Max PSI | Less Hose

Built for dual-line fluid handling where hose capacity and controlled rewind matter, the Coxreels 1275-6-75-C is a 1275 Series bevel gear hand crank hose reel configured for 1" I.D. hose with a 75 ft hose capacity and a 3000 PSI maximum pressure rating. The dual-hose layout uses two swivel inlets and two low-profile outlet risers, helping route paired hoses evenly across the drum for hydraulic, dual product delivery, and other two-line service applications.

The front bevel gear hand crank provides manual mechanical rewind for applications where spring rewind is not required or where the operator needs direct control over hose payout and retrieval. Its one-piece welded steel 'A' frame, ribbed discs, and permanently lubricated pillow block bearings support smooth rotation and stable mounting in service trucks, maintenance bays, plant areas, and equipment washdown or fluid transfer stations.

Type: Dual Hose Bevel Gear Hand Crank Hose Reel | Series: 1275 Series | Configuration: Less Hose | Hose I.D.: 1" | Hose O.D.: 1 7/16" | Hose Capacity: 75 ft | Max Pressure: 3000 PSI | Hose Included: No | Ship Weight: 68 lbs | Overall Height: 26.13" | Overall Length: 24" | Mounting Pattern: 16.81" M x 13.75" N | Base: 19" X x 20.38" Y

Features:

• Dual plumbing with two swivel inlets and two low-profile outlet risers supports paired hose routing on one reel.
• Open drum slot and low-profile outlet design help create a flatter, non-crimping hose wrap during rewind.
• Bevel gear hand crank with removable handle gives the operator controlled manual rewind and compact storage when the reel is not in use.
• One-piece all welded steel 'A' frame adds rigidity compared with bolted frame construction.
• Permanently lubricated, self-aligning pillow block bearings promote smooth drum rotation during payout and retrieval.
• Machined solid brass 90-degree full-flow NPT swivels allow seal maintenance and hose installation without removing the reel from its mount.
• Rolled edges and ribbed CNC-spun discs add strength while helping protect hose edges during use.
• CPC powder coat finish helps resist chips and corrosion in shop, fleet, and plant environments.

Made in USA:

2 Year Warranty

Applications:

• Hydraulic service areas where two compatible hoses need to be stored, routed, and retrieved together.
• Fleet and utility maintenance trucks carrying paired hose lines for field repair or mobile equipment service.
• Industrial MRO stations that require controlled hand-crank rewind instead of spring-driven retraction.
• Dual product delivery setups where separate inlet and outlet paths must be organized on a single reel.
• Equipment yards, fabrication shops, and plant maintenance areas where 75 ft of 1" hose capacity is needed without ordering hose pre-installed.

FAQs:

• Q: What does 'less hose' mean on the 1275-6-75-C?
  A: It means the reel is supplied without hose installed. The buyer must provide compatible 1" I.D. hose separately and confirm the hose's pressure rating, outside diameter, fittings, and media compatibility before installation.
• Q: Is this a spring rewind hose reel?
  A: No. This model uses a bevel gear hand crank, so hose retrieval is performed manually. That setup gives the operator direct control over rewind speed and hose placement on the drum.
• Q: What type of applications fit a dual hose reel?
  A: Dual hose reels are used when two hose lines need to be routed together, such as paired hydraulic lines or other dual product delivery setups. The reel includes two swivel inlets and two outlet risers for separate flow paths.
• Q: Can this reel be mounted to a truck or service vehicle?
  A: It can be used in mobile service applications when the mounting surface, fasteners, hose routing, and installation orientation are appropriate for the reel weight and hose load. Always verify the mounting pattern and available space before ordering.
• Q: Does the 3000 PSI rating apply to the reel or the hose?
  A: The listed 3000 PSI is the reel's maximum pressure rating. Any hose installed on the reel must also be rated for the system pressure and compatible with the fluid being transferred.

Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.

For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com