Coxreels 1275-6-100-H Dual Hose Hydraulic Motor Rewind Reel | 1275 Series | 1" Hose Diameter | 100' Hose Length | 3000 Max PSI | Less Hose

When paired hose runs are part of a high-pressure fluid system, the Coxreels 1275-6-100-H provides a motorized reel platform for managing two matching hose lines from one mounted assembly. This 1275 Series dual hose reel is sized for 1" hose I.D. with 100 ft hose capacity and a 3000 PSI maximum pressure rating, making it a practical choice for large hose storage where controlled rewind and organized routing matter. The hydraulic motor rewind configuration uses hydraulic power to retrieve the hose, helping reduce manual winding effort on long, heavy hose runs.

The 1275 Series dual hose design uses two separate fluid paths with two swivel inlets and two low-profile outlet risers, allowing both hoses to wrap evenly across the drum. The open drum slot helps support a flatter hose wrap, while the all-welded steel “A” frame, direct gear drive rewind, and permanently lubricated pillow block bearings provide a stable reel structure for fixed installation in maintenance bays, service trucks, plant utility areas, and high-pressure fluid handling stations.

Type: Dual Hose Motor Rewind Hose Reel | Series: 1275 Series | Model: 1275-6-100-H | Configuration: Less Hose | Rewind: Hydraulic Motor | Hose I.D.: 1" | Hose O.D.: 1-7/16" | Hose Capacity: 100 ft | Max Pressure: 3000 PSI | Hose Included: No | Ship Weight: 79 lbs | Overall Dimensions: 34.25" W x 26.13" H x 24" L | Mounting Pattern: 23.38" M x 13.75" N | Base: 25.5" X x 20.38" Y

Features:

• Dual hose configuration manages two hose runs on one reel, helping keep paired fluid lines organized from storage to use.
• Hydraulic motor rewind supports powered hose retrieval where hand cranking is impractical because of hose length, hose size, or installation location.
• Two external fluid paths with 90° full-flow NPT swivel inlets, one on each side of the reel, keep each hose line separately plumbed.
• Electroless nickel plated steel swivel construction on 1" models supports the larger hose size used with this reel configuration.
• Nitrile swivel seals with Teflon-supported O-ring spacers help maintain sealing integrity as the reel rotates.
• Low-profile outlet risers and open drum slot design help promote a flatter hose wrap and reduce the chance of hose crimping.
• All-welded steel “A” frame construction provides a rigid mounting structure for fixed shop, plant, or service installations.
• Direct gear drive rewind on motor-driven models eliminates chain drive components for a more compact and controlled rewind system.

Made in USA:

2 Year Warranty

Applications:

• Hydraulic service stations where paired 1" hose runs need to be stored, protected, and retrieved from a single reel location.
• Industrial maintenance and MRO areas using high-pressure hose for equipment service, fluid power work, or transfer operations.
• Fleet, construction, and heavy equipment shops that need controlled storage for long, heavy hose runs near service equipment.
• Plant utility areas where a hydraulic power source is available and powered rewind is preferred over manual cranking.
• Mobile service and field-support setups where dual hose handling must stay organized during repeated hose extension and rewind cycles.

FAQs:

• Q: What does 'less hose' mean for the 1275-6-100-H?
  A: It means the reel is supplied without hose installed. The buyer must provide compatible 1" I.D. hose separately and confirm the hose outside diameter, fittings, pressure rating, and fluid compatibility before installation.
• Q: How is a hydraulic motor rewind reel different from an electric motor rewind reel?
  A: A hydraulic motor rewind reel uses hydraulic power to rotate the reel during hose retrieval, while an electric motor rewind reel uses electrical power. The best choice depends on the available power source, installation environment, and how the reel will be controlled.
• Q: Can this reel be used for high-pressure hydraulic hose?
  A: Yes, when the complete hose assembly, fittings, fluid path, and installation stay within the reel’s 3000 PSI maximum pressure rating. The hose and fittings should be rated for the same or higher working pressure required by the system.
• Q: Why does this reel have two swivel inlets?
  A: The two swivel inlets support two separate hose runs on the same reel. Each fluid path remains separate, which is important when paired lines must be routed together but not combined.
• Q: What should be checked before mounting this reel?
  A: Confirm the 34.25" width, 26.13" height, 24" length, 23.38" x 13.75" mounting pattern, and 25.5" x 20.38" base footprint. Also allow clearance for hose payout, hose rewind, hydraulic motor access, and future service work.

Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.

For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com