Coxreels 1275-4-100-EF Dual Hose Electric 24V DC Motor Rewind Reel | 1275 Series | 1/2" Hose Diameter | 2/100' Hose Length | 3000 Max PSI | Less Hose

Built for dual-hose applications where two lines need to be stored, routed, and rewound from one reel assembly, the Coxreels 1275-4-100-EF Dual Hose Electric Motor Rewind Reel provides 100 ft of hose capacity for 1/2" I.D. hose with a 3000 PSI maximum pressure rating. As part of the 1275 Series, this reel uses dual plumbing with two swivel inlets and two low profile outlet risers, helping paired hoses wrap flat across the drum instead of crossing, pinching, or building unevenly during rewind.

The 24V DC motor rewind configuration helps reduce manual winding effort on service trucks, mobile equipment, and shop installations where long hose runs are handled repeatedly. Its all welded steel 'A' frame, direct gear drive rewind, and permanently lubricated self-aligning pillow block bearings make the reel a practical choice for medium-pressure hydraulic service, dual product delivery, and other paired-line applications where clean hose management and controlled storage matter.

Type: Dual Hose Electric Motor Rewind Reel | Series: 1275 Series | Model: 1275-4-100-EF | Configuration: Less Hose | Motor: 24V DC | Hose I.D.: 1/2" | Hose O.D.: 7/8" | Hose Capacity: 100 ft | Max Pressure: 3000 PSI | Ship Weight: 55 lbs | Overall Dimensions: 26.63" W x 19.13" H x 17.63" L | Mounting Pattern: 15.44" M x 10" N | Base: 17.38" X x 16" Y

Features:

• Dual plumbing layout uses two external fluid paths, allowing two hoses to be managed from a single reel body.
• Two machined solid brass 90° full-flow NPT swivel inlets support fluid flow into each side of the reel and simplify hose installation.
• Nitrile swivel seals with O-ring seals supported by Teflon spacers help maintain sealing integrity during rotation.
• Two low profile outlet risers and an open drum slot provide a flatter, smoother hose wrap for paired-hose applications.
• All welded steel 'A' frame construction adds rigidity compared with bolted frame designs and supports secure mounting.
• Direct gear drive rewind on motor-driven models eliminates chain drive components for smoother motorized retraction.
• Permanently lubricated, self-aligning pillow block bearings support smooth drum rotation with reduced bearing maintenance.
• CPC powder coat finish helps resist chipping and rust in shop, truck, and equipment environments.

Made in USA:

2 Year Warranty

Applications:

• Hydraulic service trucks and mobile repair units managing paired pressure and return lines from a compact reel location.
• Industrial maintenance areas where two medium-pressure hoses need organized storage, faster rewind, and reduced floor clutter.
• Dual product delivery setups requiring two hose paths from one reel frame, subject to hose and fluid compatibility.
• Fleet, equipment, and shop installations where 24V DC power is available and motor rewind is preferred over hand winding.
• Work bays, washdown support areas, and service stations that need controlled hose storage for 1/2" I.D. hose up to 100 ft.

FAQs:

• Q: What does 'less hose' mean on the 1275-4-100-EF?
  A: It means the reel is supplied without hose installed. The buyer must provide compatible 1/2" I.D. hose separately and confirm the hose outside diameter, pressure rating, fluid compatibility, and end fittings before installation.
• Q: Is this a single-hose or dual-hose reel?
  A: This is a dual-hose reel. The 1275 Series dual plumbing design uses two swivel inlets and two low profile outlet risers so paired hoses can be stored and handled together.
• Q: What does the 3000 PSI rating mean?
  A: The reel is rated for a maximum working pressure of 3000 PSI. The hose, fittings, swivels, and system pressure must all be compatible with that rating; the lowest-rated component in the assembly controls the safe working pressure.
• Q: Can this reel be mounted on a service truck?
  A: Yes, this 24V DC motor rewind configuration is commonly suited to mobile service setups when the mounting surface, electrical supply, hose routing, and pressure requirements match the installation.
• Q: Does the motor rewind replace manual hose guidance?
  A: No. The motor rewinds the reel, but the hose should still be guided as needed so the paired lines wrap evenly and do not snag on nearby equipment or mounting structures.

Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.

For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com