When you need consistent, repeatable fastening on assembly lines or in maintenance shops, the Cleco MP2464 Pistol Grip Positive Clutch Pneumatic Screwdriver delivers a precise torque range of 0.8–6.2 ft-lbs (suitable for light- to medium-duty assembly tasks) at a free speed of 2,800 RPM, providing rapid screw run-down without over-torquing sensitive components. Its pistol grip design allows easy access in confined spaces and improves operator control during repetitive work. The positive clutch mechanism (disengages the drive once the set torque is reached) ensures consistent torque delivery for electronics assembly, automotive interior fastening, and appliance manufacturing. Compact, lightweight, and balanced, the MP2464 is engineered for professional tradespeople and DIY enthusiasts seeking accurate, repeatable fastening in workshop or industrial environments.
Type: Pistol Grip Screwdriver | Series: MP Series | Free Speed: 2,800 RPM | Torque Range: 0.8–6.2 ft-lbs | Drive Size: 1/4" Hex | Air Inlet: 1/4 NPT | Length: 7.5 in
Features:
- Positive clutch mechanism for accurate torque delivery and prevention of over-tightening
- Pistol grip configuration reduces fatigue and improves control during repetitive fastening
- Lightweight aluminum housing for reduced operator strain
- Compact length allows access in tight or recessed areas
- High-speed motor delivering 2,800 RPM for efficient screw run-down
- Suitable for 1/4" hex bits for common assembly and maintenance tasks
Made in USA: 
Tech Tip: To increase tool performance, extend tool life, and lessen repair costs, use it with a Filter-Regulator-Lubricator FRL)
Applications:
- Electronics assembly — fastening screws on circuit boards and enclosures
- Appliance manufacturing & repair — installing interior components, panels, and covers
- Automotive interior assembly — dashboard, trim, and interior panel fastening
- DIY garage & home workshop — small woodworking, cabinetry, and general fastening projects
FAQs:
- Q: What is a positive clutch screwdriver?
A: A positive clutch disengages the drive automatically when the preset torque is reached, preventing over-tightening and damage to sensitive components. - Q: Can this screwdriver be used with all 1/4" hex bits?
A: Yes, standard 1/4" hex bits fit the MP2464, but always confirm compatibility with specialty or long-reach bits. - Q: What air supply is required?
A: The air inlet is 1/4 NPT. Air consumption was not provided by the manufacturer — a compatible compressor delivering clean, regulated shop air is recommended. - Q: Is this tool suitable for DIY projects?
A: Yes, the MP2464’s compact size and low torque range make it usable for electronics, small woodworking, and light assembly projects in a home workshop.
| SKU | Torque Range - Min Nm | Torque Range - Max Nm | Torque Range - Min Ft Lb | Torque Range - Max Ft Lb | Free Speed - R/Min | Length - In | Weight - Lb | Weight - Kg | Air Consumption - Scfm | Air Inlet Size - In |
|---|---|---|---|---|---|---|---|---|---|---|
| MP2464 | 3.3 | 8.5 | 0.8 | 6.2 | 2800 | 6.8 | 2.43 | 1.10 | 22 | 1/4 |
| MP2465 | 5.1 | 11.3 | 0.8 | 8.3 | 1800 | 6.8 | 2.43 | 1.10 | 22 | 1/4 |
| MP2466 | 9.6 | 15.8 | 0.8 | 11.6 | 1100 | 8.1 | 3.09 | 1.40 | 22 | 1/4 |
Looking for more information about Cleco Screwdriver? Click here to view the Catalog
Need help selecting the correct Cleco Screwdrivers for your application? Please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
