Cleco MP2437 Pneumatic Screwdriver | Versa Clutch | MP Series | 1,100 RPM | 11.6 (ft-lbs) Torque Range

Built for fastening work where adjustable clutch response matters, the Cleco MP2437 pneumatic screwdriver combines a Versa Clutch adjustable slip clutch (a clutch style that lets the user change cam overlap to tune torque output) with 1,100 RPM free speed for controlled screw run-down in assembly and repair environments. Its 0.4 - 11.6 ft-lbs torque range gives buyers flexibility for wood screws, thread-cutting screws, and general industrial fastening, where too much torque can damage the workpiece or fastener.

The MP2437 is part of Cleco’s MP Series pneumatic screwdriver lineup and uses a balanced pistol-grip format for one-handed fastening control. With 22 SCFM air consumption and a 1/4 in air inlet, this tool is suited for shops with properly regulated compressed air systems running at the manufacturer-rated 90 PSI air pressure.

Type: Pneumatic Screwdriver | Series: MP Series | Clutch Type: Versa Clutch / Adjustable Slip Clutch | Torque Range: 0.4 - 11.6 ft-lbs / 0.6 - 15.8 Nm | Free Speed: 1,100 RPM | Length: 9.1 in | Weight: 3.31 lb / 1.50 kg | Air Consumption: 22 SCFM | Air Inlet Size: 1/4 in | Rated Air Pressure: 90 PSI / 620 kPa | Standard Equipment: Owners Manual, Parts Sheet

Features:

• Adjustable slip clutch supports general fastening work where torque output must be tuned to the joint and material.
• Versa Clutch allows adjustment of cam overlap to adjust torque output.
• One-hand forward reverse switch helps speed transitions between installation and removal tasks.
• Rugged metal housing and components support regular shop and production use.
• Efficient and balanced design improves access around fixtures, benches, and assembled components.
• 1,100 RPM free speed provides a controlled fastening pace for higher-torque screwdriving compared with faster, lower-torque models.

Made in USA:

Tech Tip: To increase tool performance, extend tool life, and lessen repair costs, use it with a Filter-Regulator-Lubricator FRL)

Applications:

• Assembly workstations — installing screws and threaded fasteners where repeatable torque control is more important than high-speed run-down.
• Wood and aluminum fastening — driving screws into softer materials where clutch adjustment helps reduce over-driving and surface damage.
• Industrial maintenance and MRO — removing and reinstalling fasteners on guards, panels, brackets, equipment covers, and shop-built fixtures.
• Fabrication and repair benches — controlled fastening on light assemblies, service parts, and mixed-material components.
• Garage and workshop use — pneumatic screwdriving for users who need more torque control than a basic air driver, provided the compressor can support the tool’s air demand.

FAQs:

• Q: What does Versa Clutch mean on the Cleco MP2437?
  A: Versa Clutch refers to Cleco’s adjustable slip clutch design. It allows adjustment of cam overlap to change torque output, helping the user match fastening force to the joint, fastener, and material.
• Q: What torque range does the MP2437 provide?
  A: The MP2437 is rated from 0.4 - 11.6 ft-lbs, or 0.6 - 15.8 Nm. That range makes it useful for controlled screwdriving where fastener damage, stripped threads, or crushed material are concerns.
• Q: What air pressure should this screwdriver be run at?
  A: Cleco rates the MP Series Versa Clutch screwdrivers at 90 PSI / 620 kPa air pressure. Use a properly sized Filter-Regulator-Lubricator to keep pressure stable and help protect the tool.
• Q: Is the MP2437 better for high-speed fastening or higher-torque screwdriving?
  A: With 1,100 RPM and an 11.6 ft-lbs maximum torque rating, the MP2437 is better suited to controlled higher-torque screwdriving than very high-speed light assembly. For faster, lower-torque work, compare adjacent MP Series models with higher RPM ratings.

Looking for more information about Cleco Pneumatic Screwdriver? Click here to view the Catalog

Need help selecting the correct Cleco Pneumatic Screwdrivers for your application? Please call (800) 608-5210 or email info@intlairtool.com