Cleco 88RSAL-5C-3 Inline Push Button Reverse Pneumatic Screwdriver | 88 Series | 400 RPM | 1.2 - 13.2 (ft-lbs) Torque Range | 3/8" Square Drive

Built for controlled fastening where inline access and square-drive output are preferred, the Cleco 88RSAL-5C-3 inline push button reverse pneumatic screwdriver delivers a 1.2 - 13.2 ft-lbs torque range for assembly jobs that need more torque than light-duty screwdriver-bit tools can provide. It's 400 RPM free speed supports deliberate rundown on larger screws, bolts, and threaded fasteners, helping operators seat parts with control rather than excessive speed.

This 88 Series inline screwdriver uses a Clecomatic clutch, a torque-controlled clutch system that helps stop the tool at the selected torque setting for repeatable fastening. The push-button reverse allows the operator to back out fasteners or correct misstarts without changing tools, while the 3/8" square drive accepts compatible sockets for assembly applications that use hex-head fasteners instead of screwdriver bits.

Type: Inline Pneumatic Screwdriver | Series: Cleco 88 Series | Model: 88RSAL-5C-3 | Clutch Type: Clecomatic Clutch | Start Type: Push and Lever Start | Reverse Type: Push Button Reverse | Drive: 3/8" Square Drive | Torque Range: 1.2 - 13.2 ft-lbs / 15 - 160 in-lbs / 1.7 - 18 Nm | Free Speed: 400 RPM | Length: 11.1" / 282 mm | Weight: 3.1 lbs / 1.4 kg | Air Inlet: 1/4" NPT | Minimum Hose I.D.: 1/4" | Air Consumption: 19 SCFM | Rated Air Pressure: 90 PSI / 620 kPa

Features:

• Clecomatic clutch provides torque-controlled fastening for repeatable production assembly.
• 1.2 - 13.2 ft-lbs torque range supports controlled rundown of larger screws, small bolts, and threaded fasteners.
• 400 RPM free speed gives operators measured fastener seating speed for applications where control matters more than maximum rundown speed.
• The push-and-lever start configuration supports deliberate cycle starts during repetitive assembly work.
• Push button reverse allows fastener removal, correction, and rework without switching to a separate tool.
• 3/8" square drive accepts compatible sockets for hex-head fasteners and small assembly bolts.
• Inline body keeps driving force aligned with the fastener, supporting straight-access assembly and fixture work.
• Standard equipment includes operating instructions and service manual, suspension bail, side handle on models above 8 ft-lbs torque capacity, and all torque springs required to meet the indicated torque range.

Applications:

• Production assembly for fastening hex-head screws, small bolts, brackets, and mechanical subassemblies.
• Appliance, equipment, and machinery manufacturing, where controlled torque helps protect components and threaded joints.
• Automotive and off-road equipment component assembly involving covers, guards, panels, and moderate-torque fasteners.
• Industrial maintenance benches for removing and reinstalling machine hardware with compatible 3/8" drive sockets.
• Fixture-based fastening stations where inline alignment helps keep the socket square to the fastener during rundown.

FAQs:

• Q: What is the torque range of the Cleco 88RSAL-5C-3?
  A: The 88RSAL-5C-3 provides 1.2 - 13.2 ft-lbs of torque, equal to 15 - 160 in-lbs or 1.7 - 18 Nm. This makes it a controlled fastening screwdriver for assembly work, not an impact wrench for seized fastener removal.
• Q: Why choose the 3/8" square drive version?
  A: The 3/8" square drive is used with compatible sockets for hex-head fasteners and small bolts. Choose this version when the assembly station uses sockets rather than 1/4" hex screwdriver bits.
• Q: What does the Clecomatic clutch do?
  A: The Clecomatic clutch is Cleco’s torque-controlled clutch system. It helps stop the tool at the selected torque setting, so repeated fastening cycles stay more consistent.
• Q: Does this model have a reverse?
  A: Yes. The 88RSAL-5C-3 includes push-button reverse, which allows the operator to remove fasteners, correct misstarts, or perform rework without reaching for a second tool.
• Q: What air setup is required?
  A: Cleco rates this model at 90 PSI, or 620 kPa, with a 1/4" NPT air inlet, 1/4" minimum hose I.D., and 19 SCFM air consumption. A properly sized FRL helps keep air pressure regulated and the tool lubricated.

Looking for more information about Cleco Screwdriver? Click here to view the Catalog.

Need help selecting the correct Cleco Screwdrivers for your application? Please call (800) 608-5210 or email info@intlairtool.com