Cleco 34RAS36AX3 Pneumatic Stall Collar Reverse Angle Nutrunner | 34 Series | Lever Start | 545 RPM | 26 (ft-lbs) Max Torque

For production fastening where access is tight and torque demand is higher than lighter 34 Series angle tools, the Cleco 34RAS36AX3 pneumatic stall collar reverse angle nutrunner delivers controlled right-angle fastening in a compact pneumatic package. This 34 Series reversible stall nutrunner provides 26 ft-lbs / 36 Nm maximum torque, giving assembly teams the capacity to tighten moderate bolted joints, brackets, frames, and mechanical subassemblies without stepping up to a larger 55 Series tool. Its 545 RPM free speed gives a measured run-down speed suited to torque-controlled assembly work, while the 3/8" square drive accepts compatible sockets for common production fasteners.

The 34RAS36AX3 uses stall torque control, meaning the output spindle is coupled through the gearing and torque is controlled within practical limits by the air pressure regulator. In plain terms, the tool continues driving until the fastener load causes the motor to stall, so a stable air supply is essential for repeatable results. The AX angle head configuration provides added torque capacity within the compact 34 Series frame, and the 0.7" / 17 mm side-to-center distance helps position the socket close to housings, fixture edges, panels, and surrounding components.

Type: Pneumatic Stall Angle Nutrunner | Brand: Cleco | Model: 34RAS36AX3 | Series: 34 Series | Start Type: Lever Start | Reverse Type: Collar Reverse | Torque Control: Stall | Configuration: Reversible Right Angle | Angle Head Style: AX Angle Head | Max Torque: 26 ft-lbs / 36 Nm | Square Drive: 3/8" | Free Speed: 545 RPM | Length: 13.0" / 330 mm | Weight: 2.8 lb / 1.3 kg | Head Height: 1.4" / 35 mm | Side to Center: 0.7" / 17 mm | Air Inlet: 3/8" NPT | Minimum Hose I.D.: 5/16" | Air Consumption: 34 SCFM | Rated Air Pressure: 90 psi / 620 kPa

Features:

• Reversible right-angle format reaches fasteners along panels, brackets, housings, and fixture-mounted assemblies where straight nutrunners can be difficult to position.
• Stall torque control supports pneumatic torque adjustment through regulated air pressure for straightforward fastening stations.
• AX angle head configuration provides a higher-torque head option for 34 Series assembly jobs requiring more capacity than lower-output models.
• Lever start gives operators controlled engagement when aligning the socket, starting run-down, and seating the fastener.
• Collar reverse keeps direction control on the tool body for quick changeover between installation, removal, and rework.
• 3/8" square drive works with compatible production sockets for nuts, bolts, and assembly hardware.
• Compact 1.4" head height and 0.7" side-to-center dimension help the tool work near adjacent parts and restricted surfaces.
• Standard equipment includes operating instructions and service manual.

Made in USA:

Applications:

• General industrial assembly — tightening moderate nuts and bolts on frames, guards, covers, supports, and mounted components.
• Automotive and transportation production — fastening brackets, seat structures, equipment mounts, and other subassemblies with restricted tool clearance.
• Machinery and equipment manufacturing — running fasteners around housings, castings, panels, and mechanical assemblies.
• Fixture-based fastening operations — reaching bolts positioned near clamps, locating pins, edges, and surrounding tooling.
• Industrial maintenance and repair benches — removing and reinstalling compatible 3/8" drive fasteners during rebuilds, service work, and inspections.

FAQs:

• Q: What torque does the Cleco 34RAS36AX3 provide?
  A: This model is rated for 26 ft-lbs / 36 Nm maximum torque. Match that rating to the fastener size, joint type, and required tightening specification before selecting the tool.
• Q: What does “stall” mean on this pneumatic angle nutrunner?
  A: Stall means the tool does not shut off with a clutch. Torque is controlled by regulating air pressure, and the motor stalls when the fastener load reaches the available output torque.
• Q: What air supply does this model require?
  A: Cleco rates this tool at 90 psi / 620 kPa and lists 34 SCFM air consumption. Use a properly sized air line and regulator so torque output remains consistent during repeated fastening cycles.
• Q: Can the 34RAS36AX3 remove fasteners as well as install them?
  A: Yes. This is a reversible angle nutrunner with collar reverse, so it can be used for installation and removal when the fastener load is within the tool’s 26 ft-lbs / 36 Nm capability.
• Q: Is this model a substitute for an impact wrench?
  A: No. The 34RAS36AX3 is intended for controlled assembly fastening, not high-breakaway impact work. Use a properly rated impact wrench for seized, rusted, or oversized fasteners.

Looking for more information about Cleco Pneumatic Nutrunner? Click here to view the Catalog

Need help selecting the correct Cleco Pneumatic Nutrunners for your application? Please call (800) 608-5210 or email info@intlairtool.com