Cleco 236GLR-115A-D3T5 Heavy Duty Head Right Angle Grinder | 236 Series | 0.9 HP | 11,500 RPM | Aluminum Housing | Rear Exhaust

Built for weld grinding, edge cleanup, and controlled material removal with Type 27 depressed center wheels, the Cleco 236GLR-115A-D3T5 right angle grinder combines a compact heavy-duty head layout with 11,500 RPM free speed for fast surface work on metal parts, frames, brackets, and fabricated assemblies. Its rear exhaust routes air away from the work area, while the aluminum housing keeps the tool manageable for repeated grinding passes without adding unnecessary bulk. This model is configured for 5" Type 27 wheels using a 3/8"-24 external spindle thread, giving buyers a clear wheel and spindle match before ordering.

As part of the Cleco 236 Series, this grinder is performance rated at 90 PSI and is supplied with a wheel guard and flange wrench according to Cleco product information. The 5" wheel capacity gives more grinding coverage than smaller 4" versions, while the right angle head helps operators work across flat surfaces, welded seams, and edges where an inline grinder would be awkward.

Type: Right Angle Grinder | Series: 236 Series | Model: 236GLR-115A-D3T5 | Wheel Type: Type 27 Depressed Center Wheel | Abrasive Capacity: 5" / 125 mm Type 27 | Free Speed: 11,500 RPM | Spindle Thread: 3/8"-24 External Thread | Housing: Aluminum | Exhaust: Rear | Air Inlet: 1/4" | Minimum Hose I.D.: 1/2" / 12.7 mm | Length: 8.3" / 211 mm | Weight: 2.5 lb / 1.13 kg

Features:

• Rugged and durable aluminum housing supports repeated grinding work while keeping overall tool weight manageable.
• Right angle grinder configuration places the wheel at 90 degrees to the tool body for surface grinding, weld cleanup, and edge work.
• Rear exhaust directs spent air away from the operator’s hands and the immediate grinding area.
• Configured for 5" Type 27 depressed center wheels, commonly used for grinding and blending on metal surfaces.
• 3/8"-24 external spindle thread provides the wheel mounting configuration required for this specific model.
• Wheel guard and flange wrench are listed as standard equipment for safer setup and accessory changes.
• Performance rated at 90 PSI / 620 kPa air pressure for standard pneumatic tool system planning.

Made in USA:

Applications:

• Metal fabrication & welding shops — grinding weld beads, smoothing edges, and blending repaired metal surfaces.
• Industrial maintenance & MRO — cleaning up brackets, machinery guards, frames, and worn metal components before repair or repainting.
• Automotive, truck & trailer repair — surface preparation, rust removal, and grinding work on frames, panels, and service brackets.
• Manufacturing work cells — repeated material removal where a compact right angle wheel grinder is easier to control than a larger vertical grinder.
• Farm, fleet & garage repair — general grinding and cleanup tasks when paired with compatible Type 27 wheels and a properly sized air supply.

FAQs:

• Q: What wheel type does the Cleco 236GLR-115A-D3T5 use?
  A: This model is configured for 5" Type 27 depressed center wheels. Type 27 wheels have a depressed center that allows the wheel to sit properly under the guard for grinding and blending work.
• Q: What does the 3/8"-24 external spindle thread mean?
  A: The spindle thread is the wheel mounting interface. Accessories must match the 3/8"-24 external thread and the grinder’s 11,500 RPM speed rating before use.
• Q: Is this a die grinder or a wheel grinder?
  A: This is a right angle wheel grinder, not a collet-style die grinder. It is intended for compatible abrasive wheels rather than mounted points, carbide burrs, or small shank accessories.
• Q: Why does rear exhaust matter on an air grinder?
  A: Rear exhaust sends air out the back of the tool instead of toward the wheel area. This can help keep airflow away from the grinding path and may be preferred when working near loose debris or fine grinding dust.
• Q: What air hose size should be used?
  A: Cleco lists a minimum hose I.D. of 1/2" / 12.7 mm for this product family. Using undersized hose can restrict airflow and reduce grinder performance.

Looking for more information about Cleco Grinder? Click here to view the Catalog

Need help selecting the correct Cleco Grinders for your application? Please call (800) 608-5210 or email info@intlairtool.com