Cleco 216GLF-115A-D3T45 Heavy Duty Head Right Angle Grinder | 216 Series | 0.6 HP | 11,500 RPM | Aluminum Housing | Front Exhaust

Built for metal fabrication, weld cleanup, casting preparation, and plant maintenance grinding, the Cleco 216GLF-115A-D3T45 is a 216 Series right angle grinder with a heavy duty head configuration for Type 27 depressed-center wheels. Its 0.6 HP motor and 11,500 RPM free speed provide the speed and power needed for controlled material removal on steel, aluminum, and general metalworking surfaces, while the 4.5" Type 27 abrasive capacity gives operators a common wheel size for grinding, blending, and edge cleanup.

The aluminum housing helps keep tool weight to 2.65 lb for better handling during repeated use, and the front exhaust directs air away from the operator’s hand position while working close to the part. The right angle head improves access around weldments, brackets, frames, and confined work areas where a straight grinder cannot maintain the correct wheel position. Tool performance is rated at 90 PSI / 620 kPa air pressure.

Type: Heavy Duty Head Right Angle Grinder | Series: 216 Series | Model: 216GLF-115A-D3T45 | Power: 0.6 HP / 0.4 kW | Free Speed: 11,500 RPM | Abrasive Capacity: 4.5" / 115 mm Type 27 | Housing: Aluminum | Spindle Size: 3/8"-24 E | Exhaust: Front | Weight: 2.65 lb | Length: 7.1" | Head Height: 3.20" | Air Inlet: 1/4" | Minimum Hose I.D.: 5/16" / 7.9 mm

Features:

• Rugged and durable aluminum housing helps reduce tool weight while supporting repeated grinding use in fabrication and maintenance environments.
• Heavy duty right angle head supports material removal work where wheel control and access around the workpiece are both important.
• Powerful 0.6 HP motor provides consistent grinding output for deburring, weld cleanup, edge preparation, and general metal removal.
• 11,500 RPM free speed is matched to 4.5" Type 27 depressed-center grinding wheels when properly rated accessories are used.
• Front exhaust configuration directs discharge air forward, helping keep exhaust away from the operator’s grip area.
• 3/8"-24 E spindle supports the specified Type 27 wheel configuration listed for this model.
• Supplied with wheel guard, wheel adapter, spindle wrench, operating instructions, and service manual for setup and service reference.

Made in USA:

Applications:

• Metal fabrication shops — grinding welds, cleaning plate edges, removing burrs, and preparing parts before finishing or assembly.
• Industrial maintenance and MRO — surface cleanup on brackets, frames, machinery guards, and repaired steel components.
• Automotive and fleet repair — controlled grinding around frames, body brackets, trailer components, and general repair work where a 4.5" wheel is appropriate.
• Welding departments — blending weld beads, knocking down high spots, and preparing joints for follow-up finishing operations.
• General shop and garage use — removing rust, cleaning metal edges, and handling routine abrasive grinding tasks with a pneumatic right angle tool.

FAQs:

• Q: What wheel size does the Cleco 216GLF-115A-D3T45 use?
  A: This model is specified for 4.5" / 115 mm Type 27 depressed-center wheels. Always confirm that the wheel’s maximum operating speed equals or exceeds the grinder’s 11,500 RPM free speed.
• Q: What does Type 27 mean on this grinder?
  A: Type 27 refers to a depressed-center abrasive wheel style commonly used on angle grinders for grinding and blending. The depressed center provides clearance for the mounting hardware while allowing the wheel face to contact the workpiece properly.
• Q: Is this a die grinder or a wheel grinder?
  A: This is a right angle wheel grinder, not a collet-style die grinder. It is configured for Type 27 grinding wheels using the listed 3/8"-24 E spindle.
• Q: What air line should be used with this grinder?
  A: Cleco lists a 1/4" air inlet and a minimum hose I.D. of 5/16" / 7.9 mm. Tool performance is rated at 90 PSI / 620 kPa, so the air system should be sized to maintain that pressure at the tool during use.
• Q: Why choose front exhaust?
  A: Front exhaust routes air forward from the tool, which can help keep exhaust away from the operator’s grip area. It is useful when the exhaust direction works with the part orientation and does not disturb dust or debris toward the operator.

Looking for more information about Cleco Grinder? Click here to view the Catalog

Need help selecting the correct Cleco Grinders for your application? Please call (800) 608-5210 or email info@intlairtool.com