Chicago Pneumatic Pistol Cushion Clutch Air Screwdriver | CP2812 | 950 RPM | 1.8 - 8.1 (ft-lbs) Torque Range | 1/4" Hex Drive

Built for controlled assembly fastening and repeat shop screwdriving, the Chicago Pneumatic CP2812 Pistol Cushion Clutch Air Screwdriver gives operators a wider torque range than direct-drive models while keeping the familiar 1/4" hex quick-change drive used with common screwdriver bits and bit holders. Its 950 RPM free speed provides a balanced pace for controlled rundown, while the 1.8-8.1 ft-lbs torque range supports a useful spread of light-to-medium fastening work. The cushion clutch, a non shut-off clutch that slips or cushions as the fastener seats, helps reduce harsh reaction compared with a direct drive tool while still relying on the operator for final fastening control.

The CP2812 is part of Chicago Pneumatic's CP28 cushion clutch screwdriver range and is configured with a pistol handle for bench, fixture, and maintenance use. Its aluminum body, steel clutch housing, rubber grip, and one-hand reverse button support repeated fastening and removal work in production and repair settings. The tool's 2.43 lb weight and 9.13" length make it substantial enough for higher-torque screwdriving within its class while remaining manageable for daily pneumatic fastening tasks.

Type: Pistol Cushion Clutch Air Screwdriver | Model: CP2812 | SKU: 6151630080 | Series: CP28 Series | Clutch Type: Cushion Clutch | Torque Control System: Non Shut-Off Clutch | Torque Range in Forward: 1.8-8.1 ft-lbs / 2.5-11 Nm | Free Speed: 950 RPM | Output Drive Size: 1/4" | Output Drive Type: Hex | Output Retainer Type: Quick Change | Handle Type: Pistol | Starting System: Push Start | Reversible: Yes | Adjustment: Key | Air Consumption at Free Speed: 17 CFM / 8.4 l/s | Air Inlet: 1/4" BSP | Max Dynamic Air Working Pressure: 90 PSI / 6.3 bar | Minimum Hose Diameter: 3/8" / 10 mm | Body: Aluminum | Clutch Housing: Steel | Main Material: Aluminium, Composite Over-Sleeve | Length: 9.13" / 232 mm | Height: 6.3" / 160 mm | Width: 1.93" / 49 mm | Weight: 2.43 lb / 1.1 kg | Sound Pressure: 82 dB(A) | Sound Power: 93 dB(A) | Vibration: <2.5 m/s²

Features:

• Reliable cushion clutch supports various fastening applications where controlled rundown is required without automatic shut-off.
• 1.8-8.1 ft-lbs / 2.5-11 Nm torque range covers a practical span of light-to-medium assembly screwdriving tasks.
• 950 RPM free speed balances rundown speed with control for larger screws and threaded fasteners within the tool’s rated range.
• 1/4" hex quick-change output drive allows fast bit changes between screw types, bit holders, and compatible adapters.
• Aluminum body and steel clutch housing provide durability for repeated industrial and maintenance use.
• Rubber grip and one-hand reverse button help operators change direction quickly during installation and removal work.
• Pistol handle format supports bench, fixture, and service-station fastening where inline screwdriver access is not preferred.

Applications:

• Industrial assembly - installing screws, bolts, and threaded hardware in fixtures, brackets, covers, and small assemblies.
• Maintenance and MRO - removing and reinstalling equipment panels, guards, access covers, and service hardware.
• Fabrication shops - fastening shop-built assemblies and fixtures where torque control is useful but shut-off precision is not required.
• Automotive and fleet service - trim, accessory, light bracket, and interior fastening tasks where a pistol air screwdriver is convenient.
• Garage and workshop use - repeat screwdriving jobs where pneumatic power and quick bit changes are preferred over hand tools.

FAQs:

• Q: What does cushion clutch mean on the CP2812?
  A: A cushion clutch is a non shut-off clutch that helps soften the fastening reaction as the screw seats. It does not automatically stop at a preset torque, so the operator still controls final fastening by feel and application requirements.
• Q: Is the CP2812 a torque shut-off screwdriver?
  A: No. Manufacturer data lists the CP2812 torque control system as non shut-off clutch. For highly repeatable production torque control, use a shut-off clutch screwdriver matched to the required torque range.
• Q: How does the CP2812 compare with the CP2810 and CP2811?
  A: The CP2812 uses a cushion clutch and offers a 1.8–8.1 ft-lbs torque range at 950 RPM. The CP2810 and CP2811 are direct drive models, so they are simpler trigger-controlled screwdrivers without the cushion clutch fastening behavior.
• Q: What bits fit the CP2812?
  A: The CP2812 uses a 1/4" hex quick-change output drive. Use compatible 1/4" hex screwdriver bits, bit holders, or adapters that are suitable for pneumatic screwdriver use.
• Q: What air supply does this screwdriver require?
  A: Chicago Pneumatic specifies 90 PSI / 6.3 bar maximum dynamic working pressure, a 1/4" BSP air inlet, and a minimum 3/8" / 10 mm hose diameter for a 16 ft / 5 m hose length.

Looking for more information about Chicago Pneumatic Screwdriver? Click here to view the Catalog.

For help selecting the correct Chicago Pneumatic Screwdrivers for your assembly application, call (800) 608-5210 or email info@intlairtool.com