Chicago Pneumatic Extended Angle Sander | CP3019-20AFES | 20000 RPM | 3" Pad Size

Built for compact angle sanding, surface preparation, and high-speed finishing work in confined areas, the Chicago Pneumatic CP3019-20AFES Extended Pneumatic Angle Sander delivers a fast 20,000 RPM free speed with a 0.5 hp / 375 W motor for controlled abrasive action on metal parts, repair areas, edges, and coating-prep surfaces. Its 3" / 75 mm circular abrasive pad capacity gives technicians a small sanding footprint for localized work where larger angle sanders or broad random orbital tools may be difficult to position.

The CP3019-20AFES uses a 1/4-20 UNC output spindle thread and an extended body layout that helps improve reach in tight or recessed work areas. A durable bevel gear, streamlined safety lever, rear exhaust, and insulated composite over-housing support practical handling during industrial finishing, blending, deburring, and maintenance sanding tasks where compact access and higher tool speed are both important.

Type: Pneumatic Extended Angle Sander | Model: CP3019-20AFES | SKU: 6151700480 | Series: CP3019 | Free Speed: 20,000 RPM | Power: 0.5 hp / 375 W | Pad Capacity: 3" / 75 mm | Paper Size: 3" / 75 mm | Output Spindle Thread: 1/4-20 UNC | Governor Type: Ball | Exhaust: Rear | Rotative Inlet: No | Spindle Lock: No | Autobalancer: No | Overspeed Shut-Off: No | Starting System: Safety lever | Main Material: Aluminium, composite over-sleeve | Air Consumption @ Load: 21 CFM / 10 l/s | Air Inlet: 1/4" NPT | Min. Hose Size: 0.31" / 8 mm | Rated Working Pressure: 90 PSI / 6.3 bar | Weight: 1.54 lb / 0.7 kg | Length: 9.56" / 243 mm | Height: 2.32" / 59 mm | Sound Pressure: 77 dB(A) | Sound Power: 88 dB(A) | Vibration: 3.6 m/s² | Country of Origin: HU

Features:

• 0.5 hp / 375 W motor supports industrial finishing, blending, deburring, and localized sanding work.
• 20,000 RPM free speed provides fast abrasive movement for high-speed surface preparation and finishing tasks.
• 3" / 75 mm pad capacity gives compact access for tight areas, edges, corners, and smaller workpieces.
• Extended body layout helps reach recessed or confined sanding locations where shorter tools may be harder to position.
• 1/4-20 UNC output spindle thread fits compatible sanding accessories made for this spindle size and tool speed.
• Durable bevel gear supports long maintenance intervals in demanding finishing applications.
• Insulating composite over-housing helps improve operator comfort during repeated sanding and blending work.
• Streamlined safety lever supports controlled tool startup and operator handling.
• Rear exhaust helps direct exhaust air away from the immediate sanding area.

Applications:

• Industrial finishing: Sanding, blending, and refining small metal surfaces before coating, polishing, or assembly.
• Confined-space sanding: Reaching tight, recessed, or obstructed areas where a compact 3" extended angle sander is easier to position.
• Metal fabrication: Cleaning weld-adjacent areas, smoothing edges, deburring small parts, and preparing fabricated components.
• Maintenance and MRO: Refining repair areas, guards, brackets, housings, and equipment surfaces during refurbishment work.
• Vehicle and equipment service: Sanding localized repair zones, panel edges, brackets, and service parts where larger tools may have limited access.
• Paint and coating preparation: Preparing small or contoured surfaces before primer, paint, coating, or final finishing steps.

FAQs:

• Q: What pad size does the CP3019-20AFES use?
  A: Manufacturer data lists this model with a 3" / 75 mm circular abrasive pad capacity and 3" / 75 mm paper size. Confirm the backing pad and abrasive attachment method match the 1/4-20 UNC spindle and the tool's 20,000 RPM speed rating.
• Q: How is the CP3019-20AFES different from the CP3019-12AFES?
  A: Both are extended 3" angle sanders in the CP3019 family, but the CP3019-20AFES runs at 20,000 RPM while the CP3019-12AFES runs at 12,000 RPM.
• Q: What does the extended body help with?
  A: The extended body helps improve reach into confined, recessed, or obstructed work areas where a shorter angle sander may be harder to position or control.
• Q: What air supply does the CP3019-20AFES require?
  A: The tool is rated for 90 PSI / 6.3 bar. Manufacturer catalog data lists 21 CFM / 10 l/s air consumption at load, a 1/4" NPT air inlet, and a 0.31" / 8 mm minimum hose size.
• Q: Does this model have a spindle lock?
  A: No. Manufacturer data lists spindle lock as "No," so follow the tool instructions for proper accessory installation and removal.

Looking for more information about Chicago Pneumatic Angle Sander? Click here to view the Catalog.

For help selecting the correct Chicago Pneumatic Sanders for your assembly application, call (800) 608-5210 or email info@intlairtool.com