Chicago Pneumatic Angle Die Grinder | CP7408 | 23000 RPM | 1/4" (6 mm) Collet

Built for angled access on body shop, vehicle service, and MRO grinding tasks, the Chicago Pneumatic CP7408 Angle Die Grinder delivers 23,000 RPM free speed for fast deburring, cleaning, contouring, and light material removal with compatible carbide burrs and mounted abrasive accessories. Its catalog-listed 15/64" / 6.0 mm collet capacity supports small shank-mounted tooling, while the 0.34 HP / 250 W pneumatic motor gives technicians a compact grinder for detail work rather than high-horsepower stock removal. The 120° angle head helps approach seams, brackets, edges, and recessed surfaces from a different working angle than a standard 90° angle die grinder.

The CP7408 is part of Chicago Pneumatic's CP74 Die Grinder series, a body shop and MRO range built with multiple head styles for different access needs. Its spindle lock system allows carbide burr changes with one wrench, reducing accessory-change time during repair, finishing, and cleanup work. A rear exhaust directs spent air away from the work area, while the aluminum body, composite over-sleeve, and TPR grip surface help keep the tool manageable during repeated use around panels, fixtures, brackets, and light fabrication parts.

Type: 120° Angle Die Grinder | Series: CP74 | Model: CP7408 | SKU: 8941074080 | Free Speed: 23,000 RPM | Power: 0.34 HP / 250 W | Collet Capacity: 15/64" / 6.0 mm | Angle Type: 120° | Air Consumption at Load: 2.1 CFM / 1.0 l/s | Air Consumption at Free Speed: 2.8 CFM / 1.3 l/s | Air Inlet: 1/4" NPT | Working Pressure: 90 PSI / 6.3 bar | Min. Hose Diameter: 3/8" / 10 mm | Length: 7.68" / 195 mm | Weight: 1.37 lb / 0.62 kg | Sound Pressure: 78.6 dB(A) | Sound Power: 89.6 dB(A) | Vibration Level: 4.3 m/s² | Vibration Uncertainty K: 0.9 m/s² | Exhaust: Rear | Main Material: Aluminum, Composite Over-Sleeve | Rotative Inlet: No | Spindle Lock: Yes | Starting System: Safety Lever

Features:

• 23,000 RPM free speed supports fast deburring, cleaning, grinding, and light finishing with compatible mounted accessories.
• 120° angle-head layout provides a different approach angle for seams, inside corners, brackets, panel edges, and recessed surfaces.
• Spindle lock system allows carbide burr changes with only one wrench, helping reduce accessory-change time between tasks.
• 15/64" / 6.0 mm catalog-listed collet capacity supports compatible small shank-mounted abrasive accessories and carbide burrs.
• Rear exhaust helps direct spent air away from the workpiece and operator's immediate line of sight.
• Composite housing helps reduce heat transfer between the motor and sleeve during repeated use.
• TPR grip surface helps reduce slipping in the operator's hand during body shop, repair, and maintenance tasks.
• Safety lever starting system helps reduce accidental start risk during handling, setup, and daily operation.

Applications:

• Body shop repair: deburring panels, cleaning seam areas, smoothing brackets, and working around tight vehicle body sections.
• Vehicle service: grinding and cleanup around mounts, tabs, exhaust brackets, frame details, and fabricated repair components.
• Industrial maintenance and MRO: light edge cleanup, burr removal, and surface preparation on guards, covers, brackets, and small machine parts.
• Metal fabrication: contouring small parts, cleaning drilled holes, removing minor burrs, and preparing edges before assembly or finishing.
• Workshop and garage use: compact air grinding for users who need 120° access and have a properly sized compressed-air supply.

FAQs:

• Q: What is the CP7408 best used for?
  A: The CP7408 is used for compact angle-access deburring, cleaning, grinding, and light finishing with compatible mounted accessories. Its 120° head helps approach work from a different angle than straight or 90° die grinders.
• Q: How is the CP7408 different from the CP7406?
  A: Both models run at 23,000 RPM, but the CP7408 uses a 120° angle head while the CP7406 uses a 90° angle head. Choose between them based on the approach angle needed for the part, fixture, or repair area.
• Q: What does the spindle lock do?
  A: The spindle lock holds the spindle during accessory changes. This lets the operator change carbide burrs with one wrench instead of using a two-wrench setup.
• Q: What air supply does this grinder require?
  A: Chicago Pneumatic lists 2.1 CFM / 1.0 l/s air consumption at load and 2.8 CFM / 1.3 l/s at free speed. Use clean, regulated air at 90 PSI / 6.3 bar through the recommended 3/8" / 10 mm minimum hose diameter.
• Q: Can this grinder use any burr or mounted abrasive?
  A: No. The accessory must match the installed collet size and must have a maximum operating speed equal to or higher than the grinder's 23,000 RPM free speed. Always confirm shank size, accessory type, workpiece material, and the accessory manufacturer's safety rating before use.

Looking for more information about Chicago Pneumatic Angle Die Grinder? Click here to view the Catalog.

For help selecting the correct Chicago Pneumatic Angle Die Grinders for your assembly application, call (800) 608-5210 or email info@intlairtool.com