When fasteners are positioned beyond the reach of a standard pneumatic ratchet, the AIRCAT 808-15-A 3/8" Long Reach Composite Ratchet Wrench gives technicians added access for light fastening work in automotive, equipment, assembly, and MRO service environments. Its 35 ft-lbs maximum torque supports small fastener removal and installation, while the 200 RPM free speed helps run hardware down faster than manual ratcheting. The 3/8" square drive fits compatible 3/8" drive sockets for brackets, covers, clamps, guards, panels, light mounts, and recessed service hardware.
At 15.30" long and 3.10 lbs., the 808-15-A is built for reach rather than palm-size compactness, helping technicians place the ratchet head on fasteners located behind surrounding components. The extended drive shaft improves access in tight and recessed areas, while the unique head anti-spread construction helps maintain durability and consistent performance over the life of the tool. A low-profile forward/reverse shift knob makes direction changes easier in close quarters, and the ergonomic hex nut with composite handle helps isolate against cold and absorb vibration during repeated service work.
Type: Long Reach Composite Ratchet Wrench | Model: 808-15-A | Drive Size: 3/8" Square Drive | Free Speed: 200 RPM | Bolt Capacity: 3/8" | Max Torque: 35 ft-lbs @ 90 PSI | Weight: 3.10 lbs. | Length: 15.30" | Air Consumption: 4.0 CFM | Recommended Hose Size: 3/8" | Air Inlet: 1/4" NPT
Features:
- Provides 35 ft-lbs of maximum torque for light-duty fastener removal and installation.
- 200 RPM free speed helps speed up run-down compared with hand ratcheting.
- 3/8" square drive fits compatible 3/8" drive sockets for common small-fastener service work.
- Extended drive shaft helps reach fasteners located behind brackets, panels, guards, covers, and surrounding components.
- Unique head anti-spread construction provides added durability and consistent performance over the tool life.
- Low-profile and large forward/reverse shift knob makes direction changes easier during close-clearance work.
- Ergonomic hex nut and composite handle comfortably fit the hand while helping isolate against cold and absorb vibration.
- 15.30" long reach body helps technicians access recessed fasteners that may be difficult to reach with a standard-length ratchet.
Applications:
- Automotive repair: Reaching small fasteners behind brackets, covers, clamps, sensors, accessory hardware, and other underhood components.
- Equipment maintenance: Working on guards, access covers, compact service panels, light mounts, and repair hardware that use 3/8" drive sockets.
- MRO and shop service: Removing and installing small hardware on fixtures, housings, panels, brackets, and light mechanical assemblies.
- Interior and body service: Accessing panel fasteners, light brackets, retainers, and hardware where added reach helps tool placement.
- Light assembly and repair: Speeding up repetitive fastener run-down before final hand feel or torque verification where required.
FAQs:
- Q: What is the AIRCAT 808-15-A best used for?
A: The AIRCAT 808-15-A is best used for light 3/8" drive fastening where technicians need extra reach. Common uses include automotive repair, access cover removal, equipment maintenance, body and interior service, light assembly, and general MRO work. - Q: What is the benefit of the long reach design?
A: The 15.30" body and extended drive shaft help position the ratchet head on fasteners that are difficult to reach with a standard-length ratchet. This is useful behind brackets, guards, covers, panels, and other surrounding components. - Q: How is the AIRCAT 808-15-A different from the AIRCAT 808-15-25-A?
A: The AIRCAT 808-15-A has a 3/8" square drive, while the AIRCAT 808-15-25-A has a 1/4" square drive. Both are long reach composite ratchets listed with 35 ft-lbs maximum torque, 200 RPM free speed, 15.30" length, and 3.10 lb. weight. - Q: What air hose size should I use with the AIRCAT 808-15-A?
A: AIRCAT lists a 3/8" recommended hose size and a 1/4" NPT air inlet for this model. Using clean, regulated air helps the tool deliver proper speed, torque, and service life. - Q: Can this ratchet replace a torque wrench?
A: No. This pneumatic ratchet helps remove and run down fasteners quickly, but final torque should be checked with a calibrated torque wrench whenever a specific torque value is required.
| SKU | Free Speed (RPM) |
Bolt Capacity (in.) |
Square Drive (in.) |
Max. Torque (ft-lb) @90 psi |
Weight (lbs.) |
Length (in) |
Air Cons. (CFM) |
Rec. Hose Size (in.) |
Air Inlet NPT (in.) |
|---|---|---|---|---|---|---|---|---|---|
| 808-15-A | 200 | 1/2 | 3/8 | 35 | 3.10 | 15.30 | 3.5 | 3/8 | 1/4 |
| 808-22-A | 200 | 1/2 | 3/8 | 65 | 4.50 | 21.60 | 3.9 | 3/8 | 1/4 |
| 805-HT-22 | 200 | 5/8 | 3/8 | 130 | 5.16 | 21.60 | 4.0 | 3/8 | 1/4 |
| 809-SH-5 | 350 | 1/2 | 1/2 | 60 | 2.90 | 12.40 | 4.0 | 3/8 | 1/4 |
Looking for more information about the Aircat Pneumatic Tools Impact Wrenches? For help choosing the correct Aircat Pneumatic Tools, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
