Aircat Pneumatic Tools 802 Composite Ratchet | 70 (ft-lbs) Max Torque | 280 RPM | 3/8" Square Drive

When technicians need more torque than a compact 35 ft-lb ratchet but still want a manageable 3/8" drive pneumatic tool, the AIRCAT 802 Composite Ratchet provides a strong option for automotive repair, equipment service, body work, light assembly, and general MRO tasks. Its 70 ft-lbs maximum torque supports small-to-medium fastener removal and installation, while the 280 RPM free speed helps speed up repetitive run-down compared with hand ratcheting. The 3/8" square drive fits compatible 3/8" drive sockets for brackets, covers, panels, guards, clamps, service hardware, and other common shop fasteners.

The 802 uses a durable twin pawl mechanism (a ratchet design that uses two pawls to help distribute load and improve drive engagement), giving technicians added ratchet strength for higher-torque 3/8" drive work. At 2.75 lbs. and 10.50" long, it offers more torque capacity than AIRCAT's smaller 3/8" ratchets while remaining practical for regular service-bay use. AIRCAT's patented quiet tuned exhaust reduces sound output to 82 dBA, and the feather trigger helps the operator control speed during fastener start, run-down, and removal.

Type: Composite Ratchet | Model: 802 | Drive Size: 3/8" Square Drive | Free Speed: 280 RPM | Bolt Capacity: 3/8" | Max Torque: 70 ft-lbs @ 90 PSI | Weight: 2.75 lbs. | Length: 10.50" | Air Consumption: 4.0 CFM | Recommended Hose Size: 3/8" | Air Inlet: 1/4" NPT | Noise Level: 82 dBA

Features:

• Provides 70 ft-lbs of maximum torque for small-to-medium fastener removal and installation.
• 280 RPM free speed helps speed up fastener run-down compared with manual ratcheting.
• 3/8" square drive fits compatible 3/8" drive sockets for common automotive, equipment, and maintenance work.
• Durable twin pawl mechanism supports higher ratchet strength and consistent drive engagement.
• Patented quiet tuned exhaust reduces operating noise to 82 dBA.
• Feather trigger gives the operator control over speed during fastener start, run-down, and removal.
• Ergonomically designed housing supports comfortable handling during repeated service work.
• Composite ratchet body helps provide a practical balance of torque, reach, and operator control for shop use.

Applications:

• Automotive repair: Removing and installing brackets, covers, clamps, light suspension hardware, accessory fasteners, and service-bay components within the tool's torque range.
• Equipment maintenance: Working on guards, access panels, small mounts, housings, covers, and repair hardware where 3/8" drive sockets are commonly used.
• Body and interior service: Speeding up removal and installation of panel hardware, retainers, trim-area fasteners, and light brackets.
• Light assembly work: Running down repetitive fasteners before final hand feel or torque verification where a specified torque value is required.
• MRO and shop maintenance: Handling fasteners on fixtures, panels, brackets, housings, and light mechanical assemblies in general maintenance environments.

FAQs:

• Q: What is the AIRCAT 802 best used for?
  A: The AIRCAT 802 is best used for 3/8" drive fastening where technicians need more torque than a compact mini ratchet but still want a manageable pneumatic ratchet for automotive repair, equipment service, light assembly, and MRO work.
• Q: How is the AIRCAT 802 different from the AIRCAT 801?
  A: The AIRCAT 801 is a 3/8" composite ratchet rated at 35 ft-lbs and 320 RPM. The AIRCAT 802 is rated at 70 ft-lbs and 280 RPM, giving it higher torque in a slightly longer and heavier body.
• Q: What is a twin pawl mechanism?
  A: A twin pawl mechanism uses two pawls to engage the ratchet gear, helping distribute load and support stronger drive engagement than a single pawl layout.
• Q: What air hose size should I use with the AIRCAT 802?
  A: AIRCAT lists a 3/8" recommended hose size and a 1/4" NPT air inlet for this model. Using clean, regulated air helps the tool deliver proper speed, torque, and service life.
• Q: Can this ratchet replace a torque wrench?
  A: No. The 802 helps remove and run down fasteners quickly, but final torque should be checked with a calibrated torque wrench whenever a specific torque value is required.

Looking for more information about the Aircat Pneumatic Ratchets? Click here to view the Catalog.

For help choosing the correct Aircat Pneumatic Tools, please call (800) 608-5210 or email info@intlairtool.com