When large fasteners require 1" drive torque, extended-anvil reach, and a lower-vibration impact mechanism, the AIRCAT 1993-VXL 1" VIBROTHERM DRIVE Composite Straight Impact Wrench with 7" Anvil gives fleet, heavy equipment, agricultural, and industrial maintenance teams a high-output pneumatic tool for deep-access service work. Its 2,100 ft-lbs maximum torque supports removal and installation on large frames, equipment mounts, wheel-area hardware, suspension components, and heavy assemblies, while 2,300 ft-lbs of loosening torque helps break tight or corroded fasteners free before run-down. The 1" x 7" square drive helps position compatible 1" impact-rated sockets onto recessed or hard-to-reach fasteners.
The 1993-VXL uses AIRCAT's patented VIBROTHERM DRIVE mechanism (an impact design built to provide faster blow frequency, high torque, low vibration, and longer working life than conventional impact wrench mechanisms). AIRCAT lists the VIBROTHERM DRIVE mechanism as reducing vibration levels by 30% - 40% and increasing mechanism life by 50%. At 20.20 lbs. and 18.70" long, this composite straight impact wrench combines 1" drive output, a 7" extended anvil, and a 6,000 RPM free speed for large-fastener service where reach, torque, and tool control all matter.
Type: VIBROTHERM DRIVE Composite Straight Impact Wrench with 7" Anvil | Model: 1993-VXL | Drive Size: 1" Square Drive x 7" Anvil | Free Speed: 6,000 RPM | Bolt Capacity: 1-1/4" | Impacts Per Minute: 950 IPM | Max Torque: 2,100 ft-lbs @ 90 PSI | Loosening Torque: 2,300 ft-lbs | Weight: 20.20 lbs. | Length: 18.70" | Air Consumption: 10 CFM | Recommended Hose Size: 1/2" | Air Inlet: 1/2" NPT
Features:
- Provides 2,100 ft-lbs of maximum torque and 2,300 ft-lbs of loosening torque for high-output 1" drive fastening work.
- 7" extended anvil helps reach deep wheel hardware, recessed frame fasteners, equipment service points, and large fasteners positioned away from the tool body.
- VIBROTHERM DRIVE impact mechanism incorporates AIRCAT's patented impact wrench design for high torque and reduced vibration.
- VIBROTHERM DRIVE mechanism reduces vibration levels by 30% - 40% and increases mechanism life by 50%.
- 6,000 RPM free speed helps improve run-down speed on larger fasteners before final torque verification.
- Rubber handle grip and rubberized trigger inserts support operator comfort during repeated straight impact wrench use.
- Combined friction-ring and through-hole socket retainer helps secure compatible 1" drive impact sockets.
- Composite straight-body construction helps deliver AIRCAT's listed power-to-weight performance for 1" drive impact applications.
Applications:
- Heavy truck and fleet maintenance: Removing and installing suspension hardware, frame fasteners, chassis bolts, wheel-area hardware, mounts, guards, and large service components where extended reach helps socket placement.
- Deep wheel and rim service: Reaching fasteners in wheel and rim applications where a shorter 1" impact wrench may not position the socket correctly.
- Agricultural equipment repair: Working on tractors, implements, service vehicles, hubs, mounts, guards, and large-bolt assemblies that require 1" impact-rated sockets.
- Heavy equipment service: Supporting repair work on loaders, lifts, construction equipment, shop machinery, support equipment, and large mechanical assemblies.
- Industrial maintenance and MRO: Removing and installing large fasteners on machinery frames, equipment bases, fixtures, access plates, and plant repair assemblies.
FAQs:
- Q: What is the AIRCAT 1993-VXL best used for?
A: The AIRCAT 1993-VXL is best used for 1" drive fastening where large bolts require high torque, extended reach, and a straight impact wrench layout. Common uses include fleet maintenance, heavy truck service, agricultural equipment repair, deep wheel service, heavy equipment work, and industrial MRO. - Q: What is VIBROTHERM DRIVE?
A: VIBROTHERM DRIVE is AIRCAT's patented impact wrench mechanism designed for faster blow frequency, high torque, low vibration, and longer working life than conventional impact wrench mechanisms. - Q: How is the 1993-VXL different from the 1993-1-VXL?
A: The 1993-VXL is the extended-anvil version with a 1" x 7" square drive and 18.70" overall length. The 1993-1-VXL is the related standard straight model with a 1" square drive and 13.40" overall length. - Q: What air hose size should I use with the AIRCAT 1993-VXL?
A: AIRCAT lists a 1/2" recommended hose size and a 1/2" NPT air inlet for this model. Using the recommended hose size helps maintain airflow for high-output 1" drive impact wrench operation. - Q: Can I use smaller drive sockets with this impact wrench?
A: No. The 1993-VXL has a 1" square drive and should be used with compatible 1" drive impact-rated sockets. Do not use chrome hand sockets or undersized drive adapters for high-torque impact work.
| SKU | Free Speed (RPM) | Bolt Capacity (in.) | Square Drive (in.) | Impacts Per Minute | Max. Torque (ft-lb) @90 psi | Weight (lbs.) | Length (in) | Air Cons. (CFM) | Rec. Hose Size (in.) | Air Inlet NPT (in.) |
|---|---|---|---|---|---|---|---|---|---|---|
| 1893 | 5,000 | 1-1/4 | 1 x 8 | 1,400 | 1800 | 26.00 | 22.50 | 12 | 1/2 | 1/2 |
| 1893-1 | 5,000 | 1-1/4 | 1 | 1,400 | 1800 | 23.20 | 14.00 | 12 | 1/2 | 1/2 |
| 1993-VXL | 6,000 | 1-1/4 | 1 x 7 | 950 | 2100 | 20.20 | 18.70 | 10 | 1/2 | 1/2 |
| 1993-1-VXL | 6,000 | 1-1/4 | 1 | 950 | 2100 | 18.50 | 13.40 | 10 | 1/2 | 1/2 |
Looking for more information about the Aircat Pneumatic Impact Wrenches? For help choosing the correct Aircat Pneumatic Tools, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
