When 1" drive fastening work requires high breakaway output in a pistol-grip layout, the AIRCAT 1880-P-A 1" Pistol Grip Impact Wrench gives fleet, off-road, agricultural, and industrial maintenance teams a powerful pneumatic tool for large-bolt service. Its 1,700 ft-lbs maximum torque supports removal and installation on frames, equipment mounts, suspension hardware, wheel-area fasteners, and large mechanical assemblies, while 1,900 ft-lbs of loosening torque helps break tight or corroded fasteners free before run-down. The 1" square drive fits compatible 1" impact-rated sockets, and the 4,800 RPM free speed provides controlled run-down speed for larger fastener classes.
The 1880-P-A uses a hard-hitting pin-less hammer mechanism (an impact design that eliminates traditional hammer pins to reduce wear points while delivering strong impact output), making it well suited for demanding 1" drive service work. A molded hammer case protective cover helps guard the front housing during regular shop and field use, while the rugged bolt-on side assist handle gives the operator added control on high-torque applications. At 23.50 lbs. and 11.75" long, this pistol-grip impact wrench is built for larger fasteners where tool mass, airflow, and socket drive strength all matter.
Type: Pistol Grip Impact Wrench | Model: 1880-P-A | Drive Size: 1" Square Drive | Free Speed: 4,800 RPM | Bolt Capacity: 1-1/4" | Impacts Per Minute: 900 IPM | Max Torque: 1,700 ft-lbs @ 90 PSI | Loosening Torque: 1,900 ft-lbs | Weight: 23.50 lbs. | Length: 11.75" | Air Consumption: 16.0 CFM | Recommended Hose Size: 1/2" | Air Inlet: 1/2" NPT | Noise Level: 88 dBA
Features:
- Provides 1,700 ft-lbs of maximum torque and 1,900 ft-lbs of loosening torque for large fastener removal and installation.
- Hard-hitting pin-less hammer mechanism delivers strong impact output while reducing hammer wear points.
- Molded hammer case protective cover helps protect the tool during regular service, shop, and field use.
- Uniquely designed combined rear protective gasket and band helps keep the band from moving out of position.
- Rugged bolt-on side assist handle gives the operator added control during high-torque 1" drive work.
- Low wear pin-less hammer supports reliability during repeated large-fastener service.
- Noise level reduced to 88 dBA.
- Combined forward/reverse power management switch provides better control when changing direction and adjusting output.
- Combined through-hole and friction-ring socket retainer helps secure compatible 1" drive impact sockets.
Applications:
- Fleet and heavy truck maintenance: Removing and installing frame fasteners, suspension hardware, wheel-area hardware, chassis bolts, mounts, guards, and large service components.
- Off-road vehicle service: Supporting repair work on large vehicle assemblies, drivetrain supports, structural brackets, equipment frames, and large-bolt service points.
- Agricultural equipment repair: Working on tractors, implements, service vehicles, hubs, mounts, guards, and large-bolt assemblies that require 1" impact-rated sockets.
- Industrial maintenance and MRO: Running down and removing large fasteners on machinery frames, equipment bases, access plates, fixtures, and plant repair assemblies.
- Heavy equipment service: Handling large fasteners on loaders, lifts, construction equipment, shop machinery, and support equipment where smaller drive tools may be underpowered.
FAQs:
- Q: What is the AIRCAT 1880-P-A best used for?
A: The AIRCAT 1880-P-A is best used for 1" drive fastening where large bolts require more torque and socket strength than smaller impact wrenches can provide. Common uses include fleet maintenance, off-road vehicle service, agricultural equipment repair, heavy equipment work, and industrial MRO. - Q: What is a pin-less hammer mechanism?
A: A pin-less hammer mechanism is an impact design that eliminates traditional hammer pins, reducing wear points while still delivering strong impact energy to the anvil. On the 1880-P-A, AIRCAT describes the mechanism as hard-hitting and low wear. - Q: What is the difference between maximum torque and loosening torque?
A: Maximum torque is the tool's headline output rating, while loosening torque is the breakaway force used to remove tightened or stuck fasteners. AIRCAT lists this model at 1,700 ft-lbs maximum torque and 1,900 ft-lbs loosening torque. - Q: What air hose size should I use with the AIRCAT 1880-P-A?
A: AIRCAT lists a 1/2" recommended hose size and a 1/2" NPT air inlet for this model. Using the recommended hose size helps maintain the airflow needed for high-output 1" drive impact wrench operation. - Q: Can I use smaller drive sockets with this impact wrench?
A: No. The 1880-P-A has a 1" square drive and should be used with compatible 1" drive impact-rated sockets. Do not use chrome hand sockets or undersized drive adapters for high-torque impact work.
| SKU | Free Speed (RPM) | Bolt Capacity (in.) | Square Drive (in.) | Impacts Per Minute | Max. Torque (ft-lb) @90 psi | Weight (lbs.) | Length (in) | Air Cons. (CFM) | Rec. Hose Size (in.) | Air Inlet NPT (in.) |
|---|---|---|---|---|---|---|---|---|---|---|
| 1880-P-A | 4,800 | 1-1/4 | 1 | 900 | 1700 | 23.50 | 11.75 | 16.0 | 1/2 | 1/2 |
| 1890-P | 4,200 | 1-1/4 | 1 | 1200 | 2000 | 24.00 | 11.00 | 24.5 | 1/2 | 1/2 |
Looking for more information about the Aircat Pneumatic Impact Wrenches? For help choosing the correct Aircat Pneumatic Tools, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
