For technicians who want a full-handle 3/8" drive impact without stepping up to a larger 1/2" tool, the AIRCAT 1300-TH-A 3/8" Composite Impact Wrench delivers compact automotive fastening power with controlled handling. Its 450 ft-lbs maximum torque supports general service work on brackets, suspension hardware, engine accessories, panels, and shop equipment, while 600 ft-lbs of loosening torque helps remove tight or stubborn fasteners within the tool's range. The 10,000 RPM free speed helps speed up fastener run-down, and the 1/2" bolt capacity gives buyers a quick reference point for the fastener size class AIRCAT assigns to this tool.
The 1300-TH-A uses a Super Clutch Twin Hammer mechanism (an impact system that uses two hammers to deliver balanced blows to the anvil for steady power transfer), making it well suited for all-around automotive and maintenance use. Its 3/8" square drive fits common 3/8" impact sockets, while the 2.63 lb. composite body helps reduce tool weight during repetitive work. AIRCAT's patented quiet tuned exhaust keeps noise to 86.3 dBA, and the flip-lever forward/reverse control supports quick direction changes during removal and installation.
Type: Composite Impact Wrench | Model: 1300-TH-A | Drive Size: 3/8" Square Drive | Free Speed: 10,000 RPM | Bolt Capacity: 1/2" | Impacts Per Minute: 1,750 IPM | Max Torque: 450 ft-lbs | Loosening Torque: 600 ft-lbs | Weight: 2.63 lbs. | Length: 6.75" | Air Consumption: 6 CFM | Recommended Hose Size: 3/8" | Air Inlet: 1/4" NPT/BSP | Noise Level: 86.3 dBA | Vibration: 10.5 m/sec²
Features:
- Provides 450 ft-lbs of maximum torque and 600 ft-lbs of loosening torque for general automotive and maintenance fastening work.
- Super Clutch Twin Hammer Mechanism supports reliable impact performance for repeated shop use.
- Durable composite housing keeps tool weight down while maintaining a practical body size for service work.
- Patented housing shape helps the tool sit securely in the hand during removal and installation tasks.
- Patented quiet tuned exhaust reduces operating noise to 86.3 dBA.
- Patented easy-operation flip lever allows quick forward and reverse changes during fastener service.
- 3/8" square drive works with compatible impact-rated 3/8" drive sockets.
Applications:
- Automotive service: Removing and installing engine-bay brackets, covers, suspension hardware, brake-area fasteners, and underbody bolts within the tool's torque range.
- Fleet repair: Handling smaller chassis fasteners, guards, panels, accessory mounts, and service hardware on vans, pickups, trailers, and shop equipment.
- Industrial maintenance: Running down and removing bolts on machinery covers, fixtures, equipment frames, access panels, and repair benches.
- Body shop work: Supporting panel, bumper bracket, and component-removal tasks where 3/8" drive control is preferred over a larger impact.
- DIY garage projects: Useful for experienced home mechanics working on automotive restoration, rusted hardware, and general repair tasks with the correct air supply and impact-rated sockets.
FAQs:
- Q: What is the AIRCAT 1300-TH-A best used for?
A: The 1300-TH-A is best used for 3/8" drive automotive, shop, and maintenance fastening where a full pistol-grip impact is useful but a 1/2" drive tool may be more than the job requires. It is a good fit for brackets, panels, covers, light suspension hardware, and general service bolts. - Q: What is the difference between maximum torque and loosening torque?
A: Maximum torque is the tool's headline torque output rating, while loosening torque describes the breakaway force used to remove tightened or stuck fasteners. AIRCAT lists this model at 450 ft-lbs maximum torque and 600 ft-lbs loosening torque. - Q: Can I use chrome hand sockets with this impact wrench?
A: No. Use only impact-rated 3/8" drive sockets. Chrome hand sockets are not built for repeated impact loads and can crack or fail when used with pneumatic impact tools. - Q: What air hose size does this tool require?
A: AIRCAT recommends a 3/8" air hose for the 1300-TH-A. Using the recommended hose size helps maintain airflow so the tool can deliver proper speed and torque under load. - Q: Is this a good choice for lug nuts?
A: It may handle some passenger-vehicle lug nut removal when fastener condition and torque requirements are within range, but a 1/2" drive impact wrench is usually preferred for frequent tire service. Final tightening should always be checked with a calibrated torque wrench.
| SKU | Free Speed (RPM) | Bolt Capacity (in.) | Square Drive (in.) | Impacts Per Minute | Max. Torque (ft-lb) @90 psi | Weight (lbs.) | Length (in) | Air Cons. (CFM) | Rec. Hose Size (in.) | Air Inlet NPT (in.) |
|---|---|---|---|---|---|---|---|---|---|---|
| 1350-XL | 10,000 | 1/2 | 3/8 | 1700 | 500 | 3.15 | 6.30 | 6 | 3/8 | 1/4 |
| 1300-TH-A | 10,000 | 1/2 | 3/8 | 1750 | 450 | 2.63 | 6.75 | 6 | 3/8 | 1/4 |
Looking for more information about the Aircat Pneumatic Impact Wrenches? For help choosing the correct Aircat Pneumatic Tools, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
