When a shop needs a straightforward 1/2" pneumatic impact for automotive and maintenance fastening, the AIRCAT 1120 1/2" Composite Impact Wrench delivers useful torque in a manageable composite-body tool. Its 650 ft-lbs maximum torque supports brake, suspension, bracket, underbody, and general repair work, while 750 ft-lbs of loosening torque helps free stubborn fasteners before run-down. The 7,500 RPM free speed gives technicians solid fastener speed for repeated service tasks, and the 9/16" bolt capacity provides a quick reference for the fastener size class AIRCAT assigns to this model.
The 1120 uses a hard-hitting twin hammer mechanism (an impact design that delivers two balanced blows per rotation for steady power transfer), making it a practical choice for mechanics who want reliable impact action without a larger high-torque tool. The 1/2" square drive fits common impact-rated 1/2" sockets used across repair bays, fleet garages, and maintenance benches. At 4.8 lbs. and 7.66" long, the composite housing keeps the tool manageable for daily fastening, while the rear-mounted forward/reverse power management lever helps control direction and output during removal and installation.
Type: Composite Impact Wrench | Model: 1120 | Drive Size: 1/2" Square Drive | Free Speed: 7,500 RPM | Bolt Capacity: 9/16" | Impacts Per Minute: 1,050 IPM | Max Torque: 650 ft-lbs | Loosening Torque: 750 ft-lbs | Weight: 4.8 lbs. | Length: 7.66" | Air Consumption: 5.5 CFM | Recommended Hose Size: 3/8" | Air Inlet: 1/4" NPT
Features:
- Provides 650 ft-lbs of maximum torque and 750 ft-lbs of loosening torque for automotive, fleet, and maintenance fastening work.
- Hard-hitting twin hammer mechanism supports balanced impact output during repeated fastener removal and installation.
- Rear-mounted forward/reverse power management lever gives the technician directional and output control from the back of the tool.
- Low weight composite housing weighs only 4.8 lbs. for manageable handling during regular shop use.
- Built-in noise reduction helps reduce operating sound compared with non-muffled pneumatic impact designs.
- 1/2" square drive works with compatible impact-rated sockets for common automotive and maintenance fasteners.
- 5.5 CFM air consumption supports use with properly sized shop air systems and a 3/8" recommended air hose.
Applications:
- Automotive service: Removing and installing brake hardware, suspension brackets, underbody fasteners, engine-bay hardware, and general repair bolts within the tool's torque range.
- Fleet maintenance: Servicing pickups, vans, trailers, service panels, guards, mounts, and shop vehicles where 1/2" drive sockets are commonly used.
- Repair shops and tire bays: Supporting wheel-area service, component removal, and routine nut-and-bolt work with final torque verified by a calibrated torque wrench.
- Industrial maintenance and MRO: Running down and removing fasteners on machinery covers, fixtures, access plates, equipment frames, and maintenance benches.
- DIY garage and restoration work: Useful for experienced home mechanics working on rusted automotive hardware, suspension repairs, and restoration projects with the correct air supply.
FAQs:
- Q: What is the AIRCAT 1120 best used for?
A: The 1120 is best used for general 1/2" drive automotive, fleet, and maintenance fastening. It fits jobs such as brake work, suspension hardware, brackets, panels, underbody bolts, equipment covers, and everyday shop repair tasks. - Q: What does 750 ft-lbs of loosening torque mean?
A: Loosening torque is the breakaway force available for removing tightened or stuck fasteners. The 650 ft-lbs maximum torque rating describes the tool's headline output, while the 750 ft-lbs loosening torque reflects its removal capability. - Q: What size air hose should I use with the AIRCAT 1120?
A: AIRCAT lists a 3/8" recommended hose size for this model. Using the recommended hose helps maintain airflow so the tool can deliver proper speed and torque under load. - Q: Can I use chrome hand sockets with this impact wrench?
A: No. Use impact-rated 1/2" drive sockets only. Chrome hand sockets are not built for repeated impact loads and can crack or fail when used with a pneumatic impact wrench. - Q: Can the AIRCAT 1120 be used for lug nuts?
A: The 1120 can be used for many passenger-vehicle lug nut removal jobs when fastener condition and torque requirement are within the tool's capability. Final tightening should always be completed with a calibrated torque wrench rather than the impact wrench alone.
Looking for more information about the Aircat Pneumatic Impact Wrenches? For help choosing the correct Aircat Pneumatic Tools, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
