Aircat 6345 Pinstripe and Adhesive Removal Tool | 0.6 HP | 2,600 RPM | 5/16" x 24 Spindle Thread | Rear Exhaust

When you need to remove pinstripes, decals, and wheel weight adhesive without reaching for a full-size grinder, the AIRCAT 6345 Pinstripe and Adhesive Removal Tool delivers controlled surface cleanup with a 0.6 HP motor and 2,600 RPM free speed. The lower-speed, gear-reduced setup helps maintain usable power under contact pressure, which is useful when working adhesive residue, vinyl graphics, and tape lines from automotive panels or wheels.

Built with a 5/16" x 24 spindle thread, rear exhaust, and a top-mounted speed control switch, the AIRCAT 6345 gives technicians better control during focused removal work. The spindle lock feature supports faster accessory changes, while the composite over-mold grip helps maintain a steady hold during repeated passes in body shops, tire service areas, fleet maintenance bays, and garage repair settings.

Type: Pinstripe and Adhesive Removal Tool | SKU: 6345 | Motor: 0.6 HP | Free Speed: 2,600 RPM | Spindle Thread Size: 5/16" x 24 | Exhaust: Rear | Length: 8.6" | Weight: 2.15 lb | Air Consumption: 4 CFM | Recommended Hose Size: 3/8" | Air Inlet: 1/4" NPT | Vibration: 0.7 m/sec² | Noise Level: 80 dBA

Features:

• 2,600 RPM free speed provides controlled rotation for pinstripe, decal, and wheel weight adhesive removal.
• 0.6 HP motor supplies the power needed for repeated adhesive cleanup and surface preparation tasks.
• Built-in gear reduction adds power and stall resistance when the removal wheel is pressed against residue.
• Spindle lock feature supports faster accessory changes without unnecessary downtime.
• Speed control switch located at the top of the tool gives the user added control during detail work.
• Composite over-mold grip provides a more secure hand hold during longer removal passes.
• Rotational rear exhaust helps route air away from the immediate work area.

Applications:

• Automotive body shops: Removing pinstripes, decals, vinyl graphics, and adhesive residue during refinishing or reconditioning work.
• Tire and wheel service: Cleaning wheel weight adhesive from rims before rebalancing or wheel preparation.
• Fleet maintenance: Removing unit numbers, branding, striping, and decal residue from service vehicles and trucks.
• Used car reconditioning: Preparing panels and wheels for resale cleanup, cosmetic correction, and detailing workflows.
• DIY garage repair: Removing old striping, stickers, and adhesive residue when paired with the correct compatible removal accessory.

FAQs:

• Q: What is the AIRCAT 6345 used for?
  A: The AIRCAT 6345 is used for removing pinstripes, decals, vinyl graphics, and wheel weight adhesive. It is commonly used in automotive body shops, tire service departments, fleet maintenance, and vehicle reconditioning.
• Q: Why does this tool run at 2,600 RPM instead of grinder-level speeds?
  A: Adhesive and decal removal requires controlled surface contact rather than high-speed grinding. The 2,600 RPM speed helps the operator manage contact pressure while the built-in gear reduction supports added power and stall resistance.
• Q: What air setup is required for this tool?
  A: Manufacturer data lists 4 CFM air consumption, a 3/8" recommended hose size, and a 1/4" NPT air inlet. Use clean, regulated, lubricated air and confirm your compressor can maintain the required air supply while the tool is running.
• Q: Does the rear exhaust matter for adhesive removal?
  A: Yes. Rear exhaust directs discharged air away from the front of the tool, helping reduce air blast near the removal area while the operator works around decals, wheel surfaces, and body panels.
• Q: Does this tool include the removal wheel?
  A: The supplied manufacturer data confirms the tool specifications but does not clearly list included accessories. Please verify kit contents before publishing or ordering if the removal wheel must be included.

Looking for more information about the Aircat Pneumatic Removal Tools? Click here to view the Catalog.

For help choosing the correct Aircat Pneumatic Tools, please call (800) 608-5210 or email info@intlairtool.com