LENOX Micronizer Precision Lubricant Applicator | 1770406 | 2-Line Unit | 32 (oz.) Capacity

Built for production band sawing operations that need lubricant delivered to more than one point at the cutting area, the LENOX Micronizer 1770406 Precision Lubricant Applicator is a 2-line unit supplied with a LENOX Saw Nozzle, 32 oz. (.95 liter) reservoir, and 110V solenoid valve. The Micronizer applies a small, controlled amount of lubricant to the cutting surface, helping aid tooth penetration and chip formation while reducing heat during metal cutting.

This configuration uses precise fluid pump and air pressure controls to help apply the correct amount of lubricant to the tool. The two-line setup supports multi-point lubricant delivery, while the LENOX Saw Nozzle is recommended for most sawing applications. It is especially suited for larger band saw machines using 1-1/4" / 34 mm and wider blades where controlled fluid placement helps keep production cuts consistent.

Type: Precision Lubricant Applicator | Brand: LENOX | Product No.: 1770406 | Configuration: 2-Line Unit | Nozzle: LENOX Saw Nozzle | Reservoir Capacity: 32 oz. / .95 liter | Valve: 110V Solenoid Valve | Application: Production Band Saw Lubrication

Features:

• 2-line Micronizer configuration for controlled lubricant delivery in production sawing operations.
• Includes LENOX Saw Nozzle, recommended for most sawing applications.
• 32 oz. / .95 liter reservoir supports lubricant supply for repeat metal cutting workflows.
• 110V solenoid valve provides electrically controlled on/off lubricant delivery in compatible machine setups.
• Delivers a small amount of lubricant to the cutting surface instead of relying on high-volume flood coolant.
• Precise fluid pump and air pressure controls help apply the correct amount of lubricant to the tool.
• Recommended for larger band saw machines using 1-1/4" / 34 mm and wider blades.

Applications:

• Production band sawing operations that need controlled lubricant delivery at the cutting surface.
• Metal cutting shops running larger band saw machines with 1-1/4" / 34 mm and wider blades.
• Saw rooms using solenoid-controlled lubricant application for repeat cutting cycles.
• Fabrication and manufacturing facilities cutting bar stock, tubing, structural shapes, and other metal workpieces.
• MRO departments maintaining band saw lubrication systems for consistent cutting performance.

FAQs:

• Q: What is included with the LENOX 1770406 Micronizer?
  A: The 1770406 is listed as a 2-line unit with LENOX Saw Nozzle, 32 oz. / .95 liter reservoir, and 110V solenoid valve.
• Q: What does the Micronizer system do?
  A: The Micronizer delivers a small amount of lubricant to the cutting surface. This helps aid tooth penetration and chip formation while reducing heat and improving tool life.
• Q: What is the difference between a 1-line and 2-line Micronizer unit?
  A: A 2-line unit is configured for two lubricant delivery lines, which can support lubricant placement at more than one point depending on machine setup. A 1-line unit uses a single delivery line.
• Q: Is this the manual on/off version?
  A: No. Product no. 1770406 is listed with a 110V solenoid valve. Manual on/off switch versions are listed under different product numbers.
• Q: What machines is this Micronizer recommended for?
  A: LENOX recommends the Micronizer for production sawing operations, especially larger band saw machines using 1-1/4" / 34 mm and wider blades.

Looking for more information about Lenox Lubricant Applicator? Click here to view the Catalog.

For help selecting the correct Lenox Lubricant Applicators for your assembly application, call (800) 608-5210 or email info@intlairtool.com