Ingersoll Rand QA1L08D1LD Angle Air Nutrunner | 1/4" Drive | 60.2 (In-lbs) Torque | 850 RPM | Lever Start

For repetitive assembly work that requires controlled run-down speed, increased turning force, and right-angle access to the joint, the Ingersoll Rand QA1L08D1LD Angle Air Nutrunner combines a 1/4-inch drive with 60.2 in-lbs torque and 850 RPM free speed. The angle-head configuration helps operators position the fastening accessory near adjoining surfaces, inside housings, and around assembly components that restrict straight-line tool access. A lever-start control provides direct activation while the tool is aligned with the fastener.

The Ingersoll Rand QA1L08D1LD provides a lower-speed, higher-torque option within the QA1 angle nutrunner range for production processes using compatible 1/4-inch drive accessories. Its 850 RPM output supports controlled fastener run-down, while the 60.2 in-lbs torque rating provides additional turning force compared with faster QA1 configurations. This combination makes the tool suitable for manufacturing workstations where joint access, drive compatibility, and repeatable pneumatic fastening performance are key selection factors.

Type: Angle Air Nutrunner | Model: QA1L08D1LD | Configuration: Angle | Drive Size: 1/4" | Torque: 60.2 in-lbs | Free Speed: 850 RPM | Start Type: Lever Start

Made in USA:

Applications:

• Production assembly — running and tightening compatible fasteners where controlled speed and increased torque match the joint requirements.
• Equipment manufacturing — fastening brackets, guards, housings, and internal components in assemblies with restricted tool clearance.
• Appliance manufacturing — completing repetitive fastening inside cabinets, frames, panels, and enclosed assemblies.
• Automotive and transportation production — installing compatible fasteners on brackets, fixtures, interior components, and subassemblies.
• Industrial assembly stations — handling 1/4-inch drive fastening operations where right-angle access improves tool positioning around nearby components.

FAQs:

• Q: What type of fastening work suits the Ingersoll Rand QA1L08D1LD?
  A: The QA1L08D1LD is suited to repetitive pneumatic assembly operations where its 1/4-inch drive, 60.2 in-lbs torque rating, 850 RPM speed, and angle-head configuration match the fastener, joint, and available tool clearance.
• Q: Why choose the 850 RPM QA1L08D1LD instead of a faster QA1 angle nutrunner?
  A: This model provides more listed torque at a lower run-down speed than the faster 1,270 RPM QA1 configurations supplied in this product group. It is a better fit when the joint requires additional turning force and the lower speed matches the assembly process.
• Q: What does lever start mean on this angle nutrunner?
  A: Lever start means the operator activates the pneumatic motor by pressing a lever on the tool body. This allows the fastening accessory to be positioned on the joint before the run-down cycle begins.
• Q: Does the 60.2 in-lbs torque rating guarantee the final fastener torque?
  A: No. Final joint torque can vary with air pressure, joint characteristics, fastener condition, accessory selection, and operating technique. Use an approved torque-verification method when the assembly requires a specified final torque.
• Q: What accessories should be used with the QA1L08D1LD?
  A: Use compatible 1/4-inch drive fastening accessories that match the tool's exact output-drive and retention configuration. Confirm the specific drive style and accessory requirements in the manufacturer catalog before ordering.

Looking for more information about the Ingersoll Rand Nutrunner? Click here to view the Catalog

For help choosing the proper Ingersoll Rand Nutrunners for your assembly application, please email info@intlairtool.com or call (800) 608-5210