When dual hydraulic hose must be stored on a reel with powered rewind, the Coxreels 1275HPL-B-12-A provides an air motor rewind solution for high-pressure rescue and hydraulic tool systems. Part of the 1275HP Series, this less-hose reel is rated for 10,000 PSI and accepts up to 200 ft of 1/4" I.D. hose, giving equipment builders, rescue apparatus upfitters, and hydraulic service teams a reel platform that can be matched to the correct hose assembly for their system.
The 1275HP Series is built for dual hydraulic applications, meaning it uses two plumbing paths for paired hydraulic lines rather than a single-hose layout. This model includes two high-pressure 90° full-flow melanized steel 1/4" swivel inlets, VITON swivel seals, two low-profile outlet risers, and an open drum slot design that helps the hose lay flat during rewind. The B outlet option provides -5 JIC male outlets with a 1/2" x 3/8" reducer, while the air motor rewind uses direct gear drive construction for powered hose retrieval without a chain.
*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.
Type: Air Motor Rewind Dual Hydraulic Hose Reel | Series: 1275HP Series | Model: 1275HPL-B-12-A | Configuration: Less Hose | Hose I.D.: 1/4" | Hose O.D.: 1/2" | Hose Capacity: 200 ft | Max Pressure: 10,000 PSI | Hose Included: No | Outlet Option: B, -5 JIC Male & 1/2" x 3/8" Reducer | Rewind: Air Motor | Ship Weight: 52 lbs | Overall Dimensions: 21.5" W x 18.63" H x 17.63" L | Mounting Pattern: 15.44" M x 10" N | Base: 17.38" X x 15.38" Y
Features:
- Air motor rewind provides powered hose retrieval for applications where manual crank rewind is not preferred.
- Reliable direct gear drive on motor-driven models eliminates chain drive components for consistent rewind operation.
- Two high-pressure 90° full-flow melanized steel 1/4" swivel inlets support dual hydraulic emergency rescue systems and high-pressure hydraulic tools.
- VITON swivel seals support hydraulic service where seal compatibility and pressure capability are important.
- Two low-profile outlet risers and open drum slot design help create a flat, smooth hose wrap with reduced crimping risk.
- One-piece, all-welded steel A frame base strengthens the reel body and provides a stable mounting platform.
- CNC robotically spun ribbed discs with rolled edges add structural strength while helping protect hose during winding and unwinding.
- Chip-resistant and rust-inhibiting CPC powder coat finish helps protect the reel in shop, vehicle-mounted, and equipment-mounted environments.
Made in USA: 
Applications:
- Fire and rescue apparatus - managing paired hydraulic lines for rescue cutters, spreaders, rams, and related emergency tool systems.
- Mobile hydraulic service vehicles - storing high-pressure hose on fleet trucks, utility service bodies, and field maintenance platforms.
- Industrial hydraulic tool stations - organizing dual hydraulic lines near presses, cutters, pullers, and other high-pressure tools.
- Equipment builders and upfitters - integrating a less-hose reel where the final hose assembly, fittings, and pressure rating must be specified separately.
- Maintenance and MRO facilities - reducing hose clutter and helping protect hydraulic hose runs between service tasks.
FAQs:
- Q: Does the 1275HPL-B-12-A include hose?
A: No. This is a less-hose reel, meaning hose is not installed or included. Select compatible 1/4" I.D. hydraulic hose separately and confirm the hose, fittings, and working pressure match the system. - Q: What does the A suffix mean on this model?
A: On this 1275HP motorized reel configuration, the A suffix identifies air motor rewind. This means the reel uses compressed air to power hose retrieval instead of a hand crank. - Q: What is the B outlet option?
A: The B outlet option provides -5 JIC male outlets with a 1/2" x 3/8" reducer. Verify this outlet configuration against the hose ends and hydraulic tool connections used in your system. - Q: Can this reel be used for ordinary air or water hose?
A: This model is built for dual high-pressure hydraulic service, not general shop air or washdown service. For air, water, or oil hose storage, choose a Coxreels reel series with the correct pressure rating, hose size, and service type. - Q: Why choose air motor rewind instead of a hand crank?
A: Air motor rewind is useful when long hose runs, frequent retrieval, or vehicle-mounted systems make manual rewind less practical. It allows powered hose retrieval while still letting the buyer specify the exact hose required for the hydraulic system.
| LESS HOSE | SIZE INDEX |
|||||||
|---|---|---|---|---|---|---|---|---|
| LESS HOSE SKU | DESCRIPTION | INLET | OUTLET | CAPACITY 1/4" I.D. |
CAPACITY 3/8" I.D. |
PSI | APRX. LBS |
|
|
1125HP SERIES 10,000 psi - two 1/4" 90° inlets. These reels are an essential component to operate hydraulic tools requiring 10,000 psi can be easily managed safely for efficient use in emergency situations.
|
||||||||
| 1275HPL-B-8 | Rim Rewind | 1/4" | 1/2" | 135' | 85' | 10,000* | 37 | 3 |
| 1275HPL-B-8-C | Geared Crank | 1/4" | 1/2" | 135' | 85' | 10,000* | 43 | 3 |
| 1275HPL-B-8-A | Air Motor | 1/4" | 1/2" | 135' | 85' | 10,000* | 50 | 3 |
| 1275HPL-B-8-E | Electric Motor | 1/4" | 1/2" | 135' | 85' | 10,000* | 68 | 3 |
| 1275HPL-B-12 | Rim Rewind | 1/4" | 1/2" | 200' | 125' | 10,000* | 39 | 4 |
| 1275HPL-B-12-C | Geared Crank | 1/4" | 1/2" | 200' | 125' | 10,000* | 45 | 4 |
| 1275HPL-B-12-A | Air Motor | 1/4" | 1/2" | 200' | 125' | 10,000* | 52 | 4 |
| 1275HPL-B-12-E | Electric Motor | 1/4" | 1/2" | 200' | 125' | 10,000* | 70 | 4 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
