Cleco CCBPWN2000D8 CellCore Cordless Electric High Torque Nutrunner | 4 RPM | 321.6 - 1475 (ft-lbs) Torque Range | 1" Square Drive

Built for the largest controlled bolting jobs in the CellCore high torque range, the Cleco CCBPWN2000D8 CellCore Cordless Electric High Torque Nutrunner delivers a 321.6–1475 ft-lbs torque range for structural fastening, heavy equipment assembly, and industrial production work where accurate tightening is critical. Its 4 RPM speed gives operators deliberate control on high-load joints, while the 1" square drive fits compatible high-torque sockets used on large industrial fasteners. This is a cordless electric nutrunner, not an impact wrench, so it is intended for programmed torque application rather than uncontrolled impact removal.

The CCBPWN2000D8 combines a 436–2000 Nm torque range with CellCore cordless mobility for assembly stations, field service areas, and maintenance crews that need high torque without routing an air hose or power cord to the joint. Its pistol configuration, 16.26" length, and 1.57" side-to-center distance help position the tool around frames, fixtures, and bolted machinery. CellCore high torque tools can store up to 10 on-tool rundown applications, commonly called FastApps, and may be connected to compatible Cleco controller systems for expanded programming, process visibility, and fastening data management when required by the production setup.

Type: Cordless Electric High Torque Nutrunner | Series: CellCore | Model: CCBPWN2000D8 | Configuration: Pistol | Torque Range: 321.6–1475 ft-lbs / 436–2000 Nm | Speed: 4 RPM | Output Drive: 1" Square Drive | Weight: 14.7 lb / 6.68 kg, without battery | Length: 16.26" / 413 mm | Side to Center: 1.57" / 40 mm | Height: 8.19" / 208 mm

Features:

• High torque CellCore platform supports controlled tightening up to 1475 ft-lbs for large bolted joints and high-load assemblies.
• 4 RPM output helps operators manage final rundown on large fasteners where torque control is more important than speed.
• 1" square drive output matches compatible high-torque sockets and accessories used in heavy industrial bolting.
• FastApps programming allows up to 10 fastening applications to be stored directly on the tool for repeatable station setup.
• Large on-tool interface supports basic programming without requiring a controller for every setup.
• Compatible Cleco controller integration can support expanded rundown programming, traceability, and live production feedback when required.
• Cordless configuration removes air hose routing from the work area, improving access around large frames, fixtures, and mobile equipment.
• Drop-tested assembly-line construction supports use in production and maintenance environments where tools are handled throughout the shift.

Note: Cordless Battery and Charger Sold Separately. Batteries and Chargers can be purchased from the following links:

Batteries:

• Cleco T50-1000497 Smart Lithium-Ion Battery
• Cleco T50-1000498 Smart Lithium-Ion Battery

Chargers:

• Cleco T50-1000499 Rapid Charger
• Cleco T50-1000500 6-Bay Sequential Charger

Made in USA: 

Applications:

• Heavy equipment manufacturing — tightening major frame, axle, undercarriage, and structural fasteners on large machinery.
• Rail and transit service — applying controlled torque to bogie, chassis, suspension, and support-frame bolted connections.
• Industrial assembly lines — fastening repeat large joints where programmable rundown control and clear pass/fail feedback are required.
• Plant maintenance and MRO — servicing presses, conveyors, mounted machinery, large gearboxes, and fabricated equipment without a pneumatic supply line.
• Energy, infrastructure, and fabrication — controlled tightening on skids, towers, heavy frames, and structural support assemblies.

FAQs:

• Q: Is the CCBPWN2000D8 used for tightening or fastener removal?
  A: This model is primarily used for controlled tightening to a specified torque. It should not be treated like an impact wrench for general breakaway or fastener removal work unless Cleco’s documentation and the application setup confirm that use case.
• Q: What does the 321.6–1475 ft-lbs torque range tell me?
  A: It shows the tightening torque window supported by this tool. Select this model only when the required joint torque falls within that range and the 1" square drive matches the socketing used in the process.
• Q: Why is the speed only 4 RPM?
  A: At very high torque levels, slower speed supports controlled rundown and helps the operator manage the reaction forces created by large fasteners. For high-torque assembly, repeatability and control often matter more than fast spin speed.
• Q: Can this tool be used without a controller?
  A: Yes. CellCore high torque tools can store up to 10 FastApps directly on the tool for standalone operation. A compatible Cleco controller may be used when the application requires expanded programming, fastening traceability, or live production reporting.
• Q: Does the tool include a battery and charger?
  A: The provided title and catalog data do not confirm battery or charger inclusion for this SKU. Verify kit contents before ordering or publishing the page so customers know whether they are purchasing a bare tool or a complete kit.

Looking for more information about Cleco Nutrunner? Click here to view the Catalog

Need help selecting the correct Cleco Nutrunners for your application? Please call (800) 608-5210 or email info@intlairtool.com