Built for controlled fastening in connected production environments, the Cleco CTBAW383 CellCore cordless electric right angle nutrunner delivers a 7.4 - 28 ft-lbs torque range with a 395 RPM free speed for medium-torque assembly work where accuracy and repeatability are more important than impact-style breakaway force. Its 3/8" square drive accepts compatible square-drive sockets, while the right angle head helps operators reach fasteners near brackets, housings, frames, fixtures, and other areas where a straight tool may not align with the joint.
The CTBAW383 is suited for safety-critical assembly, batch-controlled production, and fastening stations that require cordless mobility without giving up controller-based process support. Its 20.60" length provides reach into assemblies, while the 0.65" side-to-center distance helps position the socket close to nearby obstructions. This listing is for the tool only; cordless battery and charger are sold separately.
Please note that this listing is for the tool only; the Cordless Battery and Charger are not included and must be purchased separately.
Type: Cordless Electric Nutrunner | Grip Style: Right Angle | Model: CTBAW383 | RPM: 395 | Torque Range: 7.4 - 28 ft-lbs | Drive Size: 3/8" | Drive Type: Square Drive | Length: 20.60" | Side to Centre: 0.65"
Features:
- Connectivity supports reliable real-time synchronization with manufacturing and engineering systems for connected assembly environments.
- 395 RPM free speed helps balance controlled rundown speed with the higher 7.4 - 28 ft-lbs torque range required for medium-torque joints.
- Right angle configuration improves access around fixtures, brackets, housings, panels, and other obstructions on assembly lines.
- 3/8" square drive output accepts compatible sockets for nut, bolt, and cap screw fastening.
- Accurate fastening performance supports safety-critical assembly where repeatability and process control are required.
- Cordless operation reduces air hose and cord management issues at the workstation while preserving mobility around large parts and fixtures.
- Tool-only configuration lets facilities pair the nutrunner with the correct compatible Cleco battery and charger setup already used in the plant.
Made in USA: 
Note: Cordless Battery and Charger Sold Separately. Batteries and Chargers can be purchased from the following links:
Batteries:
Chargers:
Applications:
- Automotive assembly — tightening controlled fasteners on brackets, chassis components, housings, seats, interior modules, and subassemblies.
- Heavy truck and off-road equipment production — fastening medium-torque joints on cab structures, panels, frames, equipment covers, and production fixtures.
- Appliance and general manufacturing — repeatable nut and bolt fastening at stations that require cordless movement and controlled torque output.
- Aerospace and precision assembly — right angle access for fastening near ribs, brackets, covers, tooling, and tight structural areas.
- Maintenance and rework cells — controlled fastening for production support teams working with repeatable torque requirements and compatible Cleco cordless systems.
FAQs:
- Q: What is the torque range of the Cleco CTBAW383?
A: The CTBAW383 has a torque range of 7.4 - 28 ft-lbs. This places it above lower-torque CTBAW models and makes it better suited for medium-torque production fastening rather than light screwdriving or impact-style bolt removal. - Q: What does the 3/8" square drive fit?
A: The 3/8" square drive accepts compatible 3/8" drive sockets. It is used for socket-based nut and bolt fastening, not 1/4" hex screwdriver bits. - Q: Why is the CTBAW383 slower than some lower-torque models?
A: Cordless assembly nutrunners typically trade speed for higher torque capacity. The CTBAW383 runs at 395 RPM to support the higher 7.4 - 28 ft-lbs torque range while maintaining controlled rundown performance. - Q: Are the battery and charger included?
A: No. This listing is for the tool only. The cordless battery and charger are not included and must be purchased separately. - Q: Is this tool intended for automotive repair or production assembly?
A: The CTBAW383 is a precision assembly nutrunner for controlled fastening in manufacturing and rework environments. It is not an impact wrench and should not be selected for removing stuck lug nuts, rusted bolts, or high-breakaway service work.
| SKU | Torque Range | Free Speed (rpm) | Weight | Output Drive | ||||
|---|---|---|---|---|---|---|---|---|
| Min Nm | Max Nm | Min Ft Lb | Max Ft Lb | Lb | kg | |||
| CTBAW153 | 3.6 | 15.0 | 2.7 | 11.1 | 1025 r/min | 3.1 | 1.40 | 3/8“ Square Drive |
| CTBAW213 | 5.2 | 21.0 | 3.8 | 15.5 | 735 r/min | 3.1 | 1.40 | 3/8“ Square Drive |
| CTBAW273 | 6.8 | 27.0 | 5.0 | 19.9 | 560 r/min | 3.1 | 1.40 | 3/8“ Square Drive |
| CTBAW383 | 10.0 | 38.0 | 7.4 | 28.0 | 395 r/min | 3.4 | 1.55 | 3/8“ Square Drive |
| CTBAW503 | 13.0 | 50.0 | 9.6 | 36.9 | 285 r/min | 3.5 | 1.60 | 3/8“ Square Drive |
| CTBAW653 | 17.0 | 65.0 | 12.5 | 47.9 | 220 r/min | 3.7 | 1.70 | 3/8“ Square Drive |
Looking for more information about Cleco Cordless Electric Nutrunner? Click here to view the Catalog
Need help selecting the correct Cleco Cordless Electric Nutrunners for your application? Please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
