Ingersoll Rand ES100P High-Torque Electric Screwdriver | 400 RPM | 15 - 40 (In-lbs) Torque Range

When assembly work requires more fastening torque and a controlled rundown speed, the Ingersoll Rand ES100P high-torque electric screwdriver delivers an adjustable 15 - 40 in-lb torque range for production fastening of screws and small threaded fasteners. Its 400 RPM free speed provides a measured approach to fastener rundown, giving operators greater control during applications where higher torque requirements make faster screwdriver models less suitable.

The inline configuration supports straight-access fastening at assembly benches, production lines, and manufacturing workcells where the tool can be positioned directly along the fastener axis. Push-to-start activation (the motor starts when axial pressure is applied to the bit and fastener) simplifies repetitive fastening cycles by eliminating the need to operate a separate trigger. The ES100P gives production teams a practical electric fastening option for applications that fall within its higher 15 - 40 in-lb torque range.

Type: High-Torque Electric Screwdriver | Model: ES100P | Configuration: Inline | Start Type: Push-to-Start | Free Speed: 400 RPM | Torque Range: 15 - 40 in-lb

Features: 15 - 40 in-lb adjustable torque range supports higher-torque screw fastening within the tool's specified operating range. 400 RPM free speed provides controlled fastener rundown for assembly tasks where torque requirements take priority over high-speed cycling. Inline body configuration supports direct axial access to fasteners at benches, production fixtures, and repetitive assembly stations. Push-to-start activation begins the fastening cycle when pressure is applied to the bit and fastener, reducing the need for separate trigger operation. Electric operation eliminates the need to route a compressed-air supply to the fastening station. Higher torque capacity than lower-range ES Series models provides an option for production applications involving fasteners that require up to 40 in-lb of tightening torque. Made in USA:

Applications:

• Production assembly lines fastening screws and small threaded components that require torque settings between 15 and 40 in-lb.
• Appliance and equipment manufacturing workcells performing repetitive higher-torque fastening operations.
• Automotive component assembly where straight-access screw fastening falls within the ES100P torque range.
• Electrical equipment and enclosure assembly involving controlled installation of threaded fasteners.
• Bench assembly and manufacturing stations where a lower-speed electric screwdriver helps operators manage fastener seating and final tightening.

FAQs:

• Q: What types of fastening jobs are suited to the Ingersoll Rand ES100P?
  A: The ES100P is suited to repetitive production fastening applications requiring torque between 15 and 40 in-lb. Its 400 RPM speed and inline configuration make it a practical choice for higher-torque assembly tasks with direct access to the fastener.
• Q: Why does the ES100P operate at 400 RPM?
  A: The lower free speed provides a more controlled rundown for fasteners within the screwdriver's higher torque range. Buyers should select fastening tools based on both the required torque and the cycle speed needed for the assembly process.
• Q: What does push-to-start operation mean?
  A: Push-to-start means the screwdriver begins running when the operator presses the bit against the fastener and applies axial force. This activation method helps simplify repetitive fastening cycles because a separate trigger does not need to be operated.
• Q: How does the ES100P compare with the ES70P?
  A: The ES100P provides a higher 15 - 40 in-lb torque range and a lower 400 RPM free speed, while the ES70P operates from 10 - 26 in-lb at 700 RPM. Choose between them according to the required fastening torque and desired rundown speed.
• Q: Can the ES100P replace a pneumatic screwdriver?
  A: It can be used in assembly applications that fall within its specified torque range and operating requirements. Because it is electrically powered, the ES100P does not require a compressed-air supply at the fastening station.

Looking for more information about the Ingersoll Rand Screwdriver? Click here to view the Catalog

For help choosing the correct Ingersoll Rand Screwdrivers for your application, please call (800) 608-5210 or email info@intlairtool.com