Coxreels 1175-6-200-SP Stainless Steel Hand Crank Hose Reel | 1175-SS Series | 1" Hose Diameter | 200' Hose Length | 3000 Max PSI | Less Hose

For operations that need extended hose reach in corrosion-prone or contamination-sensitive environments, the Coxreels 1175-6-200-SP Stainless Steel Hand Crank Hose Reel stores up to 200 feet of 1-inch I.D. hose without requiring electrical or pneumatic power for retrieval. This 1175-SS Series reel uses stainless steel construction and a non-corrosive external fluid path for food and chemical processing plants, marine facilities, washdown stations, and other locations where rust can compromise ordinary steel equipment. Its 3,000 PSI maximum working pressure supports compatible medium-pressure service when every hose, fitting, and system component is properly selected for the intended fluid and operating conditions.

The direct hand crank gives operators positive control over retrieval of the longer 200-foot hose assembly, while an adjustable tension brake limits uncontrolled drum movement during payout and rewind. A long-handled locking pin secures the drum for storage or transportation. The -SP finish is Coxreels' standard unpolished, as-manufactured stainless steel surface. A low-profile stainless steel outlet riser promotes an orderly, non-crimping hose wrap, and permanently lubricated self-aligning pillow block bearings support smooth drum rotation.

*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.

Type: Stainless Steel Hand Crank Hose Reel | Series: 1175-SS Series | Model: 1175-6-200-SP | Configuration: Less Hose | Rewind Method: Direct Hand Crank | Hose I.D.: 1" | Maximum Hose O.D.: 1-7/16" | Hose Capacity: 200 ft | Maximum Working Pressure: 3,000 PSI | Hose Included: No | Overall Dimensions: 36.63" W x 26.13" H x 24" L | Mounting Pattern: 23.31" M x 13.75" N | Base Dimensions: 25.5" X x 20.13" Y

Features:

• Solid steel direct hand crank with a smooth round handle provides controlled manual hose retrieval without a separate power supply.
• Standard unpolished, as-manufactured stainless steel finish supports service where rust, corrosion, and contamination are concerns.
• Machined stainless steel 90° full-flow NPT swivel inlet creates a non-corrosive external fluid path.
• Nitrile swivel seals are lubricated with non-toxic food-grade grease.
• Stainless steel low-profile outlet riser and open drum slot promote a flat, non-crimping hose wrap.
• One-piece, CNC robotically welded 1/4-inch stainless steel A-frame base provides a rigid mounting platform without bolted frame joints.
• Permanently lubricated, self-aligning pillow block bearings support smooth reel rotation.
• Adjustable tension brake helps prevent free-wheeling during hose payout and retrieval.
• Long-handled locking pin secures the reel against rotation during storage or transport.
• CNC-spun, ribbed stainless steel discs have rolled edges for added strength, hose protection, and safer handling.

Made in USA:

2 Year Warranty

Applications:

• Food and beverage processing facilities managing compatible washdown, water, air, or process-fluid hose.
• Chemical processing areas where stainless steel construction helps address corrosion and contamination concerns.
• Marine facilities, docks, and vessel-service locations exposed to moisture and salt air.
• Sanitation and cleaning stations requiring up to 200 feet of large-diameter hose reach.
• Industrial plants that need manually controlled hose payout and retrieval without installing a motor power source.
• Mobile service trailers and equipment platforms where the drum must be secured during transport.

FAQs:

• Q: Does the Coxreels 1175-6-200-SP include hose?
  A: No. This model is supplied as a reel only. The separately selected hose must have a 1-inch inside diameter, an outside diameter no greater than 1-7/16 inches, and suitable pressure, temperature, and fluid-compatibility ratings.
• Q: What does the 'SP' suffix mean?
  A: The -SP suffix identifies the standard unpolished, as-manufactured stainless steel finish. It provides stainless steel construction without the electro-polished surface used on Coxreels -SS configurations.
• Q: How does this model differ from the 1175-6-100-SP?
  A: The 1175-6-200-SP holds up to 200 feet of 1-inch hose, compared with 100 feet for the 1175-6-100-SP. The additional drum capacity increases the reel width to 36.63 inches and the ship weight to 83 pounds, so mounting space should be checked carefully.
• Q: Can the reel operate at 3,000 PSI with any 1-inch hose?
  A: No. The completed assembly is limited by its lowest-rated component. Confirm that the hose, fittings, connectors, and other fluid-path components are approved for the intended pressure, temperature, and media.
• Q: What controls the drum during use?
  A: An adjustable tension brake helps reduce free-wheeling during payout and rewind. A separate locking pin secures the drum against rotation during storage or transportation.

Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.

For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com