Dotco 12L2562-01M6 Inline Die Grinder | 12-25 Series | 0.9 HP | 12000 RPM | 6mm Collet | Front Exhaust

Built for controlled burr work, die cleanup, and lower-speed finishing tasks, the Dotco 12L2562-01M6 Inline Die Grinder combines 0.9 HP output with a 12,000 RPM free speed for applications where torque and control matter more than maximum surface speed. Its 6mm collet (the clamping sleeve that holds compatible metric-shank rotary burrs and mounted abrasives) makes this model a useful choice for shops that standardize on metric grinding accessories.

Part of the 12-25 Series, this inline Dotco grinder uses a composite housing to keep weight down during extended deburring, blending, and material removal work. The front exhaust configuration vents air near the work end of the tool, while the straight-body layout gives technicians direct control when working along edges, pockets, castings, and fixtures. With capacity for a 1" carbide burr and 1.5" mounted wheel, the 12L2562-01M6 is suited for industrial maintenance, fabrication, toolroom, and repair environments that need controlled pneumatic grinding power.

Type: Inline Die Grinder | Series: 12-25 Series | SKU: 12L2562-01M6 | Motor: 0.9 HP / 0.67 kW | Free Speed: 12,000 RPM | Collet Size: 1/4" / 6mm | Collet Guard Series: 200 | Exhaust: Front | Abrasive Capacity: 1" Carbide Burr, 1.5" Mounted Wheel | Housing Material: Composite | Length: 7.4" | Weight: 1.76 lbs | Air Inlet: 1/4" NPT | Minimum Hose I.D.: 5/16" / 7.9 mm | Rated Air Pressure: 90 PSI / 620 kPa

Features:

• Composite housing helps reduce tool weight while providing a practical grip surface for daily grinding and deburring work.
• High power-to-weight ratio supports productive material removal without moving to a larger or bulkier grinder.
• -01 termination identifies the 200 Series collet configuration, with M6 indicating the 6mm collet option.
• Front exhaust configuration vents air at the front of the tool for applications where a simple, direct exhaust layout is preferred.
• Accepts up to a 1" carbide burr or 1.5" mounted wheel for common die grinding, edge blending, and surface preparation tasks.
• Standard equipment includes the applicable collet and collet wrenches for routine accessory changes.
• Optional collet guard 01-2047PT is supplied separately for applications requiring additional accessory guarding.
• 12,000 RPM speed provides a controlled option for shops using larger burrs, mounted points, or materials where a slower grinder is preferred.

Made in USA:

Applications:

• Tool and die work — controlled shaping, cavity cleanup, edge breaking, and burr removal with compatible 6mm shank accessories.
• Metal fabrication and welding — blending weld starts and stops, cleaning brackets, removing sharp edges, and preparing small areas before finishing.
• Industrial maintenance and MRO — grinding repair parts, cleaning machined surfaces, and removing burrs from equipment components.
• Transportation and fleet repair — deburring castings, brackets, frames, and replacement parts during truck, trailer, or equipment service.
• DIY garage and restoration work — controlled metal cleanup on repair panels, brackets, and small fabricated parts when paired with proper air supply and accessories.

FAQs:

• Q: What accessories can I use with the Dotco 12L2562-01M6?
  A: This model is configured with a 6mm collet and is intended for compatible 6mm shank carbide burrs and mounted abrasive accessories. The manufacturer lists capacity up to a 1" carbide burr and 1.5" mounted wheel.
• Q: Why choose the 12,000 RPM version instead of a faster die grinder?
  A: A 12,000 RPM grinder can provide better control with larger burrs, certain mounted wheels, and materials where excessive speed can cause chatter, heat, or reduced accessory life. Always match accessory size, material, and maximum RPM rating to the tool.
• Q: What does front exhaust mean?
  A: Front exhaust means air exits near the working end of the grinder. This layout is simple and compact, but users should account for air direction when working around dust, chips, or delicate surfaces.
• Q: Does this grinder include the collet and wrenches?
  A: Yes, standard equipment includes the applicable collet and collet wrenches. Burrs, mounted wheels, collet guards, and other accessories are selected separately based on the job.
• Q: What air setup does this tool require?
  A: The tool is performance rated at 90 PSI / 620 kPa and requires a minimum 5/16" hose I.D. Use clean, regulated, lubricated air to help maintain speed, power, and service reliability.

Looking for more information about Dotco Grinder? Click here to view the Catalog

Need help selecting the correct Dotco Grinders for your application? Please call (800) 608-5210 or email info@intlairtool.com