Coxreels 1275WT-3-100-A Dual Hose Air Motor Welding Reel | 1275W Series | 3/8" Hose Diameter | 100' Hose Length | 200 Max PSI

Built for welding gas hose management where manual rewind is not the preferred setup, the Coxreels 1275WT-3-100-A Dual Hose Air Motor Welding Reel gives fabrication shops, service trucks, and repair bays a powered rewind option for bulky twin-line welding hose. This 1275W Series reel is configured for 3/8" hose I.D., 100 ft hose capacity, and a 200 PSI maximum pressure rating, making it a practical choice for oxy-fuel cutting, heating, brazing, and welding support areas that need controlled hose storage without repeated hand cranking.

The air motor rewind uses compressed air to help retrieve long hose runs, reducing the physical effort required at the end of the job. Dual brass swivel inlets, one on each side of the reel, support separate welding gas paths, while the low profile outlet riser and open drum slot help guide the hose into a flatter, smoother wrap. For buyers managing hose around welding tables, maintenance bays, and mobile work areas, the 1275WT-3-100-A helps keep hose organized, elevated, and ready for the next cut or repair.

Type: Dual Hose Air Motor Welding Reel | Series: 1275W Series | Model: 1275WT-3-100-A | Hose Included: Yes | Hose I.D.: 3/8" | Hose Capacity: 100 ft | Max Pressure: 200 PSI | Rewind: Air Motor | Drive Type: Air Driven | Mounting: Bench, Floor, Truck, Wall

Features:

• Air motor rewind assists hose retrieval, reducing manual winding effort on long twin-line welding hose runs.
• Dual external fluid paths with machined solid brass 90° full-flow 3/8" NPT swivel inlets, one on each side of the reel, help maintain separate welding gas paths.
• VITON swivel seals support welding gas service and allow seal maintenance without removing the reel from its mount.
• Exclusive low profile outlet risers and open drum slot design help create a flat, smooth hose wrap during rewind.
• Permanently lubricated, self-aligning pillow block bearings support smooth rotation with reduced routine bearing maintenance.
• CNC spun and ribbed discs with rolled edges add strength while helping protect hose during winding and unwinding.
• One-piece CNC robotically welded 12-gauge steel 'A' frame base provides a rigid reel structure for bench, floor, truck, or wall mounting.
• CPC powder coat finish helps resist chips and rust, while the adjustable tension brake helps prevent free wheeling during payout, transport, or storage.

Made in USA:

2 Year Warranty

Applications:

• Welding and metal fabrication shops organizing twin-line welding hoses used for oxy-fuel cutting, heating, brazing, and general repair work.
• Fleet and truck service bays keep welding hoses controlled around frame repair areas, service pits, trailer work, and maintenance stations.
• Industrial maintenance and MRO staging: welding gas hose near plant repair areas, where the hose must be stored off the floor between jobs.
• Mobile service trucks and field repair units use air-powered rewind where compressed air is available and manual cranking is less desirable.
• Farm, ranch, and equipment repair shops managing long hose runs used for cutting, heating, and metal repair around machinery and implements.

FAQs:

• Q: Does the Coxreels 1275WT-3-100-A include hose?
  A: Yes. This draft treats the SKU as a with-hose reel, meaning the 100 ft figure refers to reel capacity for compatible 3/8" welding hose.
• Q: What is the advantage of an air motor welding reel?
  A: An air motor rewind uses compressed air to help retrieve the hose, which reduces manual effort compared with a hand crank reel. It is especially useful when hose is long, bulky, or rewound frequently during the workday.
• Q: What does 'dual hose' mean on this reel?
  A: Dual hose means the reel is built for two hose paths, commonly used with twin-line welding gas hose. The reel uses two external fluid paths with a brass swivel inlet on each side.
• Q: Can this reel be used for oxy-acetylene or T-grade welding hose?
  A: Yes, when the hose selected matches the gas service, hose size, fittings, and 200 PSI pressure rating. Always confirm hose material and fitting compatibility with the gases being used before installation.
• Q: Where can this reel be mounted?
  A: This model is listed for bench, floor, truck, or wall mounting. Before ordering, confirm the available space, base size, hose routing, and air supply location for the motor rewind.

Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.

For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com