Coxreels 1125WCL-6-EB 24V DC Electric Motor Rewind Welding Cable Reel | 1125WCL Series | Up to 2 AWG x 300' Capacity | 450 Amps | Less Cable

Built for welding cable management on mobile welding rigs, service trucks, fabrication bays, and maintenance workstations, the Coxreels 1125WCL-6-EB is a 24V DC electric motor rewind welding cable reel from the 1125WCL Series. It is rated for 450 amps through a drum-located slip ring assembly, which allows electrical current to pass through the reel while keeping electrode or grounding cable organized during payout and rewind. With capacity for up to 2 AWG x 300 ft welding cable, this reel helps reduce tangled cable, limit floor clutter, and protect expensive leads from unnecessary dragging and handling damage.

The 24V DC, 1/2 HP motor rewind configuration makes this model especially useful where low-voltage DC power is preferred or already available, such as mobile equipment, field service vehicles, and battery-supported welding setups. All electrical components are set inside the drum to create a narrow-width installation profile, while the direct gear drive provides motorized retraction without a chain. This model is supplied less cable, allowing the buyer to install the correct welding cable gauge and length for the job.

*Note: The above product image is for illustration purposes only. This product is a reel and does not include any welding cable. Please note this before ordering.

Type: Motorized Welding Cable Reel | Series: 1125WCL Series | Model: 1125WCL-6-EB | Rewind: Electric Motor Rewind | Motor: 24V DC, 1/2 HP | Configuration: Less Cable | Cable Capacity: Up to 2 AWG x 300 ft | Gauge Capacity: #2, #1, #1/0, #2/0 | Amp Rating: 450 AMPS | Ship Weight: 64 lbs | Overall Dimensions: 19.88" W x 19.13" H x 17.5" L | Mounting Pattern: 9.44" M x 10" N | Base: 11.38" X x 16" Y

Features:

• Drum-located slip ring assembly provides access through a removable panel for routine maintenance without removing the reel from its mount.
• Electrical current runs through a 450 AMP rated slip ring for welding cable applications.
• 24V DC electric motor rewind helps retrieve long welding leads with less manual effort than hand-crank operation.
• All electrical components are positioned inside the drum, creating a narrow-width reel for installations where side clearance is limited.
• Reliable direct gear drive provides smooth motorized rotation without a chain.
• Permanently lubricated self-aligning pillow block bearings support smooth rotation during payout and rewind.
• Long-handled locking pin secures the reel from rotation during transport or storage.
• One-piece CNC robotically welded 12 gauge steel A frame base provides a stable mounting structure with the mounting pattern located in the steel base.
• CNC spun and ribbed discs with rolled edges add strength while helping protect welding cable during use.

Made in USA:

2 Year Warranty

Applications:

• Mobile welding and field repair: Managing electrode or ground leads on service trucks, weld trailers, and equipment repair vehicles with available 24V DC power.
• Fabrication and welding shops: Keeping long welding cable organized around welding tables, fixtures, and shared workstations.
• Industrial maintenance and MRO: Storing welding leads used for machinery repair, plant fabrication, bracket repair, and general weld maintenance tasks.
• Fleet and heavy equipment service: Supporting cable payout and rewind when repairing trailers, frames, buckets, guards, and structural components.
• Grounding lead organization: Creating a cleaner cable setup for work areas where a dedicated welding ground reel improves cable control and reduces loose cable on the floor.

FAQs:

• Q: Does the Coxreels 1125WCL-6-EB come with welding cable installed?
  A: No. This model is supplied less cable, so welding cable must be purchased and installed separately. This allows the reel to be matched to the exact cable gauge and length required for the welding setup.
• Q: What makes the EB model different from the EA model?
  A: The EB model uses a 24V DC electric motor rewind. The EA version uses a 115V AC explosion proof electric motor rewind. Select the motor option that matches the available power source and installation requirements.
• Q: What does the 450 AMP rating mean on this welding cable reel?
  A: The 450 AMP rating applies to the slip ring assembly that carries current through the reel. The installed welding cable, connectors, welding machine, duty cycle, and job requirements must also be properly matched to the application.
• Q: Can this reel hold 300 feet of any welding cable?
  A: No. The 300 ft capacity applies to #2 AWG welding cable. Larger cable sizes require shorter lengths, with listed capacities of 250 ft for #1 AWG, 200 ft for #1/0 AWG, and 150 ft for #2/0 AWG.
• Q: Is this reel used for electrode leads or grounding leads?
  A: The 1125WCL Series is built for electrode and grounding lead applications. Coxreels also offers a stacking bracket option for installations that need an organized lead and ground combination.

Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.

For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com