Ingersoll Rand Non-Programmable Cordless Clutch Screwdriver | QCN2P12Q4 | 20 Voltage | 5 - 12 (Nm) Torque Range

Ingersoll Rand QCN2P12Q4 Non-Programmable Cordless Clutch Screwdriver provides repeatable fastening performance with the mobility of a cordless tool. Part of the QC Series, this 20V pistol-grip screwdriver offers an adjustable 5–12 Nm torque range, making it suitable for machinery subassemblies, automotive components, and equipment manufacturing where specified tightening torque is essential. Its 1/4" hex drive accommodates matching screwdriver bits, while the 140–700 RPM speed range supports controlled fastener engagement and rundown. The auto shut-off clutch stops the fastening operation when the selected torque is reached, helping reduce tightening variation across repetitive production cycles.

Operating on the Ingersoll Rand IQV20 20V battery platform, the QCN2P12Q4 combines mechanical torque adjustment with visual fastening feedback. The manufacturer's proven clutch design delivers Cmk > 1.67 with ±10% accuracy under specified operating conditions. Cmk is a machine capability index used to evaluate the consistency of a fastening process against defined torque limits. A configurable 360° LED ring light provides red indication for NOK (not OK) tightening, green for OK tightening, and white illumination for the work area. The separate Cycle Status Indicator displays PASS/FAIL feedback, allowing operators to recognize fastening results quickly. Featuring a brushless DC motor, lockable clutch adjustment door, and dual-speed non-contact trigger, this screwdriver weighs 2.3 lbs (1.04 kg) without battery and supports repetitive fastening operations in production environments.

Type: Non-Programmable Cordless Clutch Screwdriver | Model: QCN2P12Q4 | Series: QC Series | Tool Configuration: Pistol | Voltage: 20V | Battery Platform: IQV20 | Drive: 1/4" Hex | Torque Range: 5–12 Nm | Speed: 140–700 RPM | Motor: Brushless DC | Clutch: Auto Shut-Off | Weight Without Battery: 2.3 lbs (1.04 kg) | Length: 8.3" (210 mm) | Height: 8.2" (208.6 mm) | Setup: Non-Programmable

Features:

• Auto shut-off clutch delivers controlled tightening with Cmk > 1.67 and 10% accuracy under manufacturer-specified conditions, supporting repeatable fastening results.
• Adjustable 5–12 Nm torque range provides the highest tightening capacity among the QC Series pistol-grip models listed in the manufacturer specifications.
• Lockable, tamper-proof clutch adjustment door helps protect established torque settings against unintended changes during production.
• Non-programmable operation allows straightforward mechanical clutch adjustment without electronic fastening program configuration.
• Brushless DC motor provides enhanced durability during repeated assembly operations.
• Dual-speed, non-contact trigger is designed to withstand more than one million operating cycles.
• Configurable 360° LED ring light provides red NOK, green OK, and white task-light indications to improve fastening visibility and operator feedback.
• Cycle Status Indicator provides PASS/FAIL confirmation, helping operators identify completed and unsuccessful fastening cycles.
• Balanced, lightweight pistol-grip design supports handling during repetitive assembly work, while QC Series construction is designed to withstand more than 500,000 cycles.
• IQV20 battery platform compatibility supports cordless operation using manufacturer-listed BL20212 and BL2022 batteries and the BC1121 charger.

Applications:

• Industrial machinery assembly – tightening mounting hardware, machine covers, and mechanical subassemblies requiring controlled torque within the 5–12 Nm range.
• Automotive component manufacturing – fastening brackets, structural interior components, and threaded hardware where a defined tightening specification must be maintained.
• Appliance and equipment production – securing equipment housings, support components, and mechanical assemblies during repetitive manufacturing operations.
• Electrical and electromechanical equipment assembly – installing mechanical mounting fasteners on control enclosures, equipment frames, and supporting components.
• Production-line fastening stations – performing repeated screwdriving operations where automatic clutch shut-off and immediate visual feedback support consistent assembly procedures.

FAQs:

• Q: What is the tightening torque range of the Ingersoll Rand QCN2P12Q4?
  A: The QCN2P12Q4 offers an adjustable torque range of 5–12 Nm. Its auto shut-off clutch stops the driving operation when the selected tightening torque is reached, supporting consistent fastening across repeated assembly cycles.
• Q: How does the QCN2P12Q4 differ from the QCN2P08Q4?
  A: The QCN2P12Q4 provides a 5–12 Nm torque range, while the QCN2P08Q4 covers 3–8 Nm. Both models feature pistol-grip configurations, 1/4" hex drives, and 140–700 RPM speed ranges. The QCN2P12Q4 is suited to fastening requirements above the maximum torque capacity of the QCN2P08Q4.
• Q: Can the torque setting be changed without programming the screwdriver?
  A: Yes. The QCN2P12Q4 uses an adjustable mechanical clutch and does not require electronic fastening programming. Its lockable clutch adjustment door helps prevent accidental changes after the required setting has been established.
• Q: How does the QCN2P12Q4 indicate whether a screw has been tightened correctly?
  A: The configurable LED ring light displays green for OK tightening and red for NOK tightening. The Cycle Status Indicator provides additional PASS/FAIL feedback, while the white LED setting illuminates the work area.
• Q: Is a battery and charger kit available for the QCN2P12Q4?
  A: Yes. Ingersoll Rand offers the separate QCN2P12Q4-K2 kit, which includes the 12 Nm pistol screwdriver, two BL2012 2.5 Ah batteries, and a charger. Battery and charger inclusion for the standalone QCN2P12Q4 model should be confirmed before ordering.

Looking for more information about Ingersoll Rand Cordless Clutch Tools? Click here to view the Catalog

For help choosing the correct Ingersoll Rand Cordless Clutch Tool, please call (800) 608-5210 or email info@intlairtool.com