Dotco 14CNL97-53 Non-Reversible Pneumatic Drill | 14CNL Series | 0.9 HP | 500 RPM | Rear Exhaust

Built for controlled drilling in aerospace assembly, metal fabrication, woodworking, and industrial manufacturing, the Dotco 14CNL97-53 pneumatic drill delivers dependable performance with a 0.9 HP air motor and a 500 RPM free speed for applications requiring high torque and controlled drilling speeds. Its 14CNL Series non-reversible configuration provides consistent forward rotation, while the rear exhaust design helps direct spent air away from the work area to improve operator visibility. The included 1/2" Jacobs keyed chuck securely grips larger drill bits for accurate hole preparation and production drilling tasks.

The pistol grip configuration features ergonomic finger and thumb guides that promote confident tool control during extended operation, while the 1/2-inch models include a dead handle for added stability when drilling larger holes. Rated at 90 PSI operating pressure, this pneumatic drill combines controlled speed with dependable power, making it well suited for precision drilling where accuracy is more important than maximum RPM.

Type: Pneumatic Pistol Grip Drill | Series: 14CNL Series | Power: 0.9 HP (0.67 kW) | Operation: Non-Reversible | Free Speed: 500 RPM | Chuck: 1/2" Jacobs Keyed Chuck | Exhaust: Rear | Overall Length: 9.1 in. | Weight: 3.53 lb | Air Inlet: 1/4 in. | Minimum Hose I.D.: 5/16 in. | Operating Pressure: 90 PSI

Features:

• 0.9 HP pneumatic motor provides dependable drilling performance for demanding production environments.
• 500 RPM free speed offers controlled drilling for larger diameter holes and high-torque applications.
• Comfort grip incorporates ergonomic finger and thumb guides to improve tool control.
• Supplied with a 1/2" Jacobs keyed chuck and chuck key for secure bit retention.
• Rear exhaust directs discharged air away from the work surface and operator.
• 1/2-inch chuck models are equipped with a dead handle for improved stability during drilling.
• Suitable for aerospace, metal fabrication, and woodworking applications.

Made in USA:

Applications:

• Production drilling in aerospace manufacturing and aircraft assembly.
• Hole preparation and component fabrication in metalworking facilities.
• Woodworking operations requiring controlled drilling speeds.
• Industrial maintenance and repair shops performing precision drilling tasks.
• General manufacturing environments using larger drill bits with a keyed chuck.

FAQs:

• Q: Is this drill reversible?
  A: No. The Dotco 14CNL97-53 is a non-reversible pneumatic drill intended for forward drilling applications only.
• Q: What size drill bits can this model accept?
  A: It is supplied with a 1/2-inch Jacobs keyed chuck, allowing it to hold drill bits up to 1/2 inch in shank diameter.
• Q: Why does this model operate at 500 RPM?
  A: The lower free speed provides greater drilling control and higher torque, making it suitable for larger holes and tougher materials.
• Q: What air pressure is recommended?
  A: The drill is performance rated at 90 PSI (620 kPa), following the manufacturer's operating specifications.

Looking for more information about Dotco Drill? Click here to view the Catalog

Need help selecting the correct Dotco Drills for your application? Please call (800) 608-5210 or email info@intlairtool.com