LENOX Micronizer Solenoid Valve | 68104 | 110 Voltage

Built for LENOX MICRONIZER precision lubricant applicator systems, the LENOX 68104 Micronizer Solenoid Valve is the 110V valve used when automatic operation is needed on compatible nozzle units. A solenoid valve uses an electrical signal to open or close flow, allowing the MICRONIZER system to apply lubricant during the saw cycle instead of depending only on manual on/off control.

The 68104 is specified for 1, 2, and 3 nozzle units with automatic operation and requires 110 volts, single-phase, 50/60Hz. Within the MICRONIZER system, controlled lubricant delivery aids tooth penetration and chip formation, helping reduce heat and improve tool life during production sawing operations on larger band saw machines.

Type: Solenoid Valve | Brand: LENOX | SKU / Product No.: 68104 | System: MICRONIZER Precision Lubricant Applicator | Voltage: 110V | Phase: Single Phase | Frequency: 50/60Hz | Compatibility: 1, 2, and 3 nozzle units with automatic operation

Features:

• 110V solenoid valve for LENOX MICRONIZER precision lubricant applicator systems.
• Specified for 1-, 2-, and 3-nozzle units with automatic operation.
• Requires 110 volts, single-phase, 50/60Hz electrical service.
• Supports automatic lubricant control in MICRONIZER setups instead of manual on/off operation only.
• Works within a system built to deliver a small amount of lubricant to the cutting area.
• Helps support proper lubricant application, which aids tooth penetration and chip formation while reducing heat.
• Part of the LENOX MICRONIZER accessory and repair parts family for maintaining applicator performance.

Applications:

• Production sawing operations: Supporting automatic lubricant application on MICRONIZER-equipped band saw machines.
• Large band saw machines: Used with compatible MICRONIZER systems for machines running 1-1/4" and wider blades when the full system configuration supports it.
• Metal fabrication shops: Maintaining controlled lubricant delivery during cutting of bar stock, tubing, plate, and structural materials.
• Industrial maintenance & MRO: Replacing or servicing the solenoid valve when automatic MICRONIZER operation needs restoration.
• Toolrooms & machine shops: Helping keep sawing lubrication consistent where repeatable cutting conditions are required.

FAQs:

• Q: What is the LENOX 68104 Micronizer Solenoid Valve used for?
  A: It is a 110V solenoid valve for LENOX MICRONIZER precision lubricant applicator systems. LENOX specifies it for 1-, 2-, and 3-nozzle units with automatic operation.
• Q: What electrical service does this valve require?
  A: The 68104 requires 110 volts, single-phase, 50/60Hz electrical service. Confirm the machine control voltage before ordering so the valve matches the saw system.
• Q: Is 68104 the 110V or 220V solenoid valve?
  A: The 68104 is the 110V solenoid valve. Match the valve voltage to the machine and MICRONIZER setup before installation.
• Q: Does this SKU include nozzles, tubing, or a reservoir?
  A: The source identifies 68104 as the solenoid valve only. It does not confirm that nozzles, tubing, reservoir, mounting hardware, or a complete MICRONIZER unit are included with this SKU.
• Q: Why use automatic operation on a MICRONIZER system?
  A: Automatic operation allows the applicator to deliver lubricant during the saw cycle in a controlled way. The MICRONIZER system is intended to apply a small amount of lubricant that aids tooth penetration, chip formation, heat reduction, and tool life.

Looking for more information about Lenox Solenoid Valve? Click here to view the Catalog.

For help selecting the correct Lenox Solenoid Valves for your assembly application, call (800) 608-5210 or email info@intlairtool.com