Ingersoll Rand Cordless Forward Torque-Limited Wrench | W9691TL | 2200 (ft-lbs) Torque | 1" Square Drive | (Bare Tool Only, Battery Not Included)

For heavy truck and bus wheel service, the Ingersoll Rand W9691TL Cordless Forward Torque-Limited Impact Wrench combines powerful fastener removal with controlled wheel nut installation. Equipped with a 1" square drive and 6" extended anvil, this cordless D-handle impact wrench provides additional reach for recessed wheel fasteners on Class 8 trucks and commercial vehicles. It delivers up to 3,000 ft-lbs of nut-busting torque for loosening stubborn fasteners, with a 2,200 ft-lbs maximum reverse power setting. Its forward torque-limiting technology provides a maximum of 550 ft-lbs of tightening torque, using automatic shutoff modes to help reduce overtightening and potential damage to wheel studs during tire service.

Powered by the Ingersoll Rand IQV20™ cordless battery platform, the W9691TL operates using two 20V BL2022 5.0Ah batteries, eliminating the need for a compressed-air connection during roadside repairs and workshop maintenance. Its 890 RPM maximum free speed supports controlled fastener operation, while the torque-limited power regulator offers Snug and MID Power forward modes with automatic shutoff. A 360° adjustable auxiliary handle allows operators to reposition their grip, and side-mounted batteries help protect the battery packs when placing the tool on the ground. With an IP56 environmental rating for limited dust ingress and protection against water jets, the wrench is suited to outdoor fleet maintenance, roadside truck tire service, and commercial transportation repair.

Type: Cordless Forward Torque-Limited Impact Wrench | Model: W9691TL | SKU: W9691TL | Series: W9000 Series | Battery Platform: IQV20™ | Required Batteries: Two BL2022 20V Batteries | Drive Size: 1" Square | Configuration: D-Handle | Anvil Length: 6" Extended | Nut-Busting Torque: 3,000 ft-lbs (4,000 Nm) | Maximum Reverse Power Setting: 2,200 ft-lbs | Maximum Forward Torque: 550 ft-lbs (746 Nm) | Snug Mode: 450 ft-lbs | MID Power Mode: 550 ft-lbs | Maximum Free Speed: 890 RPM | Forward Mode Speed: 540 RPM | Blows Per Minute: 1,170 BPM | Fasteners Per Charge: Up to 250 | Motor: Brushless | Environmental Rating: IP56 | Weight with Batteries: 27.5 lbs (12.5 kg) | Overall Length: 26.1" (664 mm)

Features:

• Delivers up to 3,000 ft-lbs of nut-busting torque to help remove stubborn wheel nuts and large fasteners on commercial vehicles.
• Forward torque-limiting technology provides Snug and MID Power modes with automatic shutoff to help reduce accidental overtightening.
• Full-power reverse mode provides up to 2,200 ft-lbs of maximum torque for fastener removal.
• 1" square drive with 6" extended anvil improves access to recessed wheel nuts on heavy trucks and buses.
• Brushless motor supports efficient cordless operation and reduces maintenance associated with motor brushes.
• 360° adjustable auxiliary handle allows repositioning for improved control during high-torque fastening operations.
• Side-mounted IQV20™ batteries help protect the battery packs when the tool is placed on the ground.
• IP56-rated construction provides limited dust-ingress protection and resistance to water jets encountered during outdoor service.

Warranty: Ingersoll Rand provides a 3-Year Limited Warranty on the tool. Separate warranty terms apply to batteries and chargers.

Applications:

• Heavy truck tire service - removing wheel nuts and performing controlled preliminary tightening on Class 8 trucks.
• Commercial bus maintenance - servicing large wheel fasteners during routine tire and wheel repairs.
• Fleet maintenance facilities - performing wheel removal and installation on commercial transportation equipment.
• Roadside tire service - handling wheel fasteners without transporting or connecting an air compressor.
• Heavy vehicle repair workshops - reducing overtightening risks during repeated commercial wheel service operations.

FAQs:

• Q: What is the maximum nut-busting torque? A: It delivers up to 3,000 ft-lbs.
• Q: What is the maximum forward torque? A: Forward tightening is limited to 550 ft-lbs.
• Q: What size drive does the W9691TL have? A: It has a 1" square drive with a 6" extended anvil.
• Q: What batteries does this wrench use? A: It requires two Ingersoll Rand BL2022 20V batteries.
• Q: Can it perform final wheel nut tightening? A: No. Final torque must be verified with a calibrated torque wrench.

Looking for more information about Ingersoll Rand Impact Wrench? Click here to view the Catalog

For help choosing the correct Ingersoll Rand Impact Wrenches, please call (800) 608-5210 or email info@intlairtool.com