Dotco 12R0410-16 Inline Precision Grinder | 12-04 Series | 0.1 HP | 60,000 RPM | 3/32" Collet | Composite Housing | Rear Exhaust

Built for fine deburring, precision finishing, and small-part material removal, the Dotco 12R0410-16 Inline Precision Grinder combines a 0.1 HP pneumatic motor with a high-speed 60,000 RPM output for detailed work with compatible mounted points, carbide burs, and abrasive accessories. The 3/32" collet holds small-shank tooling used for close-tolerance finishing, while the inline body gives the operator pencil-style control for careful edge work and surface blending.

Part of the 12-04 Series, this Dotco precision grinder features a composite housing and rear exhaust configuration. The composite body helps reduce tool weight compared with all-metal housings, while the rear exhaust routes spent air away from the work surface. Its 60,000 RPM speed makes accessory speed rating critical; always match the grinder with abrasives rated for the tool’s maximum operating speed.

Type: Inline Precision Grinder | Series: 12-04 Series | Model: 12R0410-16 | Power: 0.1 HP | Free Speed: 60,000 RPM | Collet Size: 3/32" | Housing: Composite | Exhaust: Rear

Features:

• 60,000 RPM free speed supports fine finishing, deburring, and precision material removal with compatible high-speed accessories.
• 3/32-inch collet accepts small-shank mounted points, burs, and abrasive tools matched to the grinder speed rating.
• 0.1 HP pneumatic motor provides controlled power for detail grinding and finishing tasks.
• Inline body style supports pencil-style handling for careful edge work, mold finishing, and close-control surface blending.
• Composite housing helps reduce tool weight compared with all-metal tool bodies.
• Rear exhaust directs spent air away from the immediate work area and helps keep airflow off the grinding point.
• Pneumatic operation supports bench, fixture, and workstation use when paired with a properly sized compressed-air supply.

Made in USA:

Applications:

• Precision deburring on machined metal parts, small castings, and tight internal features.
• Aerospace and composite finishing where small, controlled grinding tools are required.
• Mold, die, and toolroom work involving fine edge blending and surface refinement.
• Electronics, medical device, and small-part manufacturing using high-speed detail grinding.
• Maintenance and repair tasks requiring controlled cleanup of burrs, edges, and hard-to-reach surfaces.

FAQs:

• Q: What accessories fit the Dotco 12R0410-16?
  A: This grinder uses a 3/32-inch collet, so accessories must have a compatible 3/32-inch shank. Always confirm the accessory’s maximum RPM rating before use.
• Q: Why is 60,000 RPM used on a precision grinder?
  A: High spindle speed supports very small accessories and fine material removal. It helps the tool perform detail work, deburring, and controlled finishing where larger die grinders would be too aggressive.
• Q: Can this grinder use 1/4-inch shank carbide burs?
  A: No. This model is listed with a 3/32-inch collet, so 1/4-inch shank tooling will not fit unless the manufacturer offers an approved alternate collet configuration.
• Q: What safety check is most important before using abrasives with this grinder?
  A: Confirm that the mounted point, bur, or abrasive accessory is rated at or above 60,000 RPM. Never use an accessory below the tool’s maximum speed rating.

Looking for more information about Dotco Grinder? Click here to view the Catalog

Need help selecting the correct Dotco Grinders for your application? Please call (800) 608-5210 or email info@intlairtool.com