Dotco 12L1093-01 Buffer/Polisher | 12-10 Series | 0.3 HP | 5,000 RPM | Composite Housing | Rear Exhaust

Built for compact polishing, buffing, and wire-brush finishing work, the Dotco 12L1093-01 Buffer/Polisher combines a 0.3 HP pneumatic motor with 5,000 RPM free speed for controlled surface finishing on small parts, edges, and localized work areas. The 12-10 Series tool uses a 1/4" 200 Series collet for compatible accessories, while the composite housing keeps the tool lightweight at 1.6 lb for easier maneuvering during repetitive finishing tasks.

This rear-exhaust Dotco buffer/polisher is suited for 3" wire brushes and 3" buffing wheels, making it useful for blending, cleaning, polishing, and light surface refinement where a full-size polisher is too large. The 7.2" overall length helps technicians work close to the part while maintaining control over the accessory and finish quality.

Type: Buffer/Polisher | Model: 12L1093-01 | Series: 12-10 Series | Power: 0.3 HP / 0.22 kW | Collet Size: 1/4" | Free Speed: 5,000 RPM | Abrasive Capacity: 3" / 75 mm Wire Brush, 3" / 75 mm Buffing Wheel | Housing: Composite | Weight: 1.6 lb / 0.73 kg | Overall Length: 7.2" / 183 mm | Air Inlet: 1/4" NPT | Exhaust: Rear Exhaust

Features:

• 0.3 HP pneumatic motor supports controlled buffing, polishing, and light finishing tasks.
• 5,000 RPM free speed provides faster accessory movement than the 3,200 RPM model in the same series.
• 1/4" 200 Series collet accepts compatible buffing and wire-brush accessories.
• Rated for 3" wire brushes and 3" buffing wheels for compact surface finishing work.
• Composite housing helps reduce tool weight while protecting internal components.
• Lightweight 1.6 lb body and 7.2" length improve control on small parts and confined work areas.
• Rear exhaust directs air away from the front of the tool and work surface.
• Parts are interchangeable with numerous other Dotco products in compatible configurations.

Made in USA:

Applications:

• Metal fabrication — polishing edges, blending small surfaces, and refining localized finish areas after machining or welding.
• Industrial maintenance and MRO — cleaning shafts, brackets, hardware, and replacement parts with compatible wire brushes or buffing wheels.
• Automotive and fleet repair — surface cleaning and light finishing around brackets, trim areas, small components, and repair parts.
• Manufacturing and assembly — controlled polishing and brush finishing on small production parts before inspection, coating, or final assembly.
• Shop and garage use — compact buffing and wire-brush work where a smaller pneumatic tool offers better control than a large polisher.

FAQs:

• Q: What accessories can the Dotco 12L1093-01 use?
  A: The catalog lists this model for 3" wire brushes and 3" buffing wheels with a 1/4" collet. Always confirm accessory shank size, rated speed, and workpiece compatibility before use.
• Q: How is the 12L1093-01 different from the 12L1092-01?
  A: Both are 12-10 Series 0.3 HP buffer/polishers, but the 12L1093-01 runs at 5,000 RPM while the 12L1092-01 runs at 3,200 RPM. Choose the speed based on the accessory and finish requirements.
• Q: What does rear exhaust mean?
  A: Rear exhaust directs spent air toward the back of the tool instead of the work surface. This can help keep airflow away from the contact point during polishing and brush finishing.
• Q: Is this a full-size automotive paint polisher?
  A: No. This is a compact pneumatic buffer/polisher for 3" accessories, small parts, and localized finishing. It is not a large pad polisher for broad body panels.

Looking for more information about Dotco Buffer? Click here to view the Catalog.

Need help selecting the correct Dotco Buffers for your application? Please call (800) 608-5210 or email info@intlairtool.com