Dotco 10L2752-80 Heavy Duty Head Right Angle Sander | 10-27 Series | 0.9 HP | 11,000 RPM | Aluminum Housing | Front Exhaust

Built for fast disc sanding, edge blending, and surface preparation work, the Dotco 10L2752-80 10-27 Series right angle sander delivers 0.9 HP of pneumatic output with an 11,000 RPM free speed for 4" sanding and polishing discs. The right angle head places the abrasive disc at 90 degrees to the tool body, giving technicians better access along panels, weld zones, castings, and fabrication edges where a straight tool is harder to control. Its 5/8"-11 external threaded spindle supports common threaded disc mounting hardware, while the front exhaust directs spent air forward and away from the operator’s hand position.

The aluminum housing gives the 10L2752-80 a solid, production-ready feel, while the low profile head helps keep the tool close to the work surface for controlled sanding and polishing passes. This model is rated for operation at 90 PSI / 620 kPa air pressure and is part of Dotco’s 10-27 Series heavy duty head sander/grinder lineup for material removal work in fabrication, transportation equipment, welding, MRO, and metal finishing environments.

Type: Right Angle Sander | Series: 10-27 Series | Power: 0.9 HP / 0.67 kW | Exhaust: Front | Termination: 5/8"-11 External Thread | Free Speed: 11,000 RPM | Abrasive Capacity: 4" / 100 mm Sanding or Polishing Disc | Housing Material: Aluminum | Weight: 3.4 lbs / 1.54 kg | Overall Length: 8.6" / 218 mm | Head Height: 3.90" | Air Inlet Size: 1/4" | Minimum Hose I.D.: 5/16" / 7.9 mm | Rated Air Pressure: 90 PSI / 620 kPa

Features:

• 0.9 HP motor output supports demanding sanding applications where a compact right angle tool must keep material removal moving.
• 11,000 RPM free speed provides the surface speed needed for 4" sanding and polishing discs when properly matched to the abrasive rating.
• 5/8"-11 external threaded spindle accepts compatible threaded backing pads and disc mounting hardware.
• Aluminum housing provides a durable tool body for shop, fabrication, and maintenance environments.
• Heavy duty low profile head helps the operator work closer to edges, seams, welds, and tight surface transitions.
• Front exhaust helps route air away from the hand grip area during sustained sanding work.
• Tool is rated at 90 PSI / 620 kPa air pressure and requires a minimum 5/16" hose I.D. for proper air delivery.
• Tool not supplied with backing pad as shown.

Note: DISK NOT INCLUDED

Made in USA:

Applications:

• Metal fabrication and welding shops — blending welds, cleaning edges, and preparing surfaces before finishing or coating.
• Transportation equipment manufacturing — sanding frames, brackets, panels, and component surfaces during build or repair work.
• Industrial maintenance and MRO — removing coatings, smoothing repaired surfaces, and preparing machinery components for service.
• Shipbuilding and structural repair — working along seams, plates, and fabricated assemblies where right angle access is useful.
• Automotive, fleet, and garage work — surface prep, paint correction support, and general disc sanding tasks when the abrasive and speed rating are compatible.

FAQs:

• Q: Does the Dotco 10L2752-80 include the sanding disc or backing pad?
  A: No. The tool is not supplied with the backing pad or disc shown in product imagery. Select a compatible 4" sanding or polishing disc setup with the correct 5/8"-11 mounting hardware.
• Q: What size abrasive disc does this right angle sander use?
  A: This model is specified for 4" / 100 mm sanding or polishing discs. Always confirm the disc, pad, and attachment hardware are compatible with a 5/8"-11 external threaded spindle.
• Q: Why does the 11,000 RPM speed matter?
  A: Higher free speed helps maintain effective surface speed for sanding and polishing, but the abrasive accessory must be rated at or above the tool’s maximum operating speed. Never use an abrasive that is rated below 11,000 RPM on this tool.
• Q: What air setup is recommended for this tool?
  A: Manufacturer information lists tool performance at 90 PSI / 620 kPa and a minimum 5/16" hose I.D. Use clean, regulated air and avoid undersized hose that can restrict airflow and reduce tool performance.
• Q: Is this a grinder or a sander?
  A: This SKU is listed as a right angle sander for 4" sanding and polishing discs. Because it belongs to a sander/grinder family, confirm your exact accessory type, guard requirements, and safety rating before using it for any grinding-style task.

Looking for more information about Dotco Sander? Click here to view the Catalog.

Need help selecting the correct Dotco Sanders for your application? Please call (800) 608-5210 or email info@intlairtool.com