Dotco 10L1101-36 Inline Extended Grinder | 10-11 Series | 0.3 HP | 28,000 RPM | 1/4" Collet | Aluminium Housing | Front Exhaust

Built for die and mold work, deburring, and hard-to-reach finishing, the Dotco 10L1101-36 Inline Extended Grinder gives technicians a compact inline tool with a 5" extended housing for access into pockets, fixtures, and recessed component areas where shorter die grinders can be difficult to control. Its 0.3 HP pneumatic motor and 28,000 RPM free speed support fast material removal with compatible carbide burrs and mounted wheels, while the 1/4" 300 Series collet fits common shank-mounted grinding accessories used for edge cleanup, blending, and light shaping.

The front exhaust configuration directs exhaust air away from the rear of the tool, helping keep the hose area cleaner during bench and fixture work. A balanced aluminum housing keeps the tool weight to 1.1 lb, making the 10L1101-36 a practical choice for extended-reach grinding tasks in aerospace, metalworking, toolroom, fabrication, and maintenance environments.

Type: Inline Extended Die Grinder | Series: Dotco 10-11 Series | Model: 10L1101-36 | Power: 0.3 HP / 0.22 kW | Free Speed: 28,000 RPM | Collet Size: 1/4" | Collet Series: 300 Series | Exhaust: Front | Extension: 5" / 125 mm Extended Housing | Abrasive Capacity: 1/2" Carbide Burr, 1" Mounted Wheel | Housing Material: Aluminum | Weight: 1.1 lb | Length: 9.8" | Air Inlet: 1/4" NPT | Minimum Hose I.D.: 1/4" / 6.4 mm | Rated Air Pressure: 90 PSI / 620 kPa

Features:

• 5" / 125 mm extended housing provides additional reach for grinding inside cavities, fixtures, molds, and recessed work areas.
• 0.3 HP / 0.22 kW motor delivers controlled power for burr work, deburring, blending, and light material removal.
• 28,000 RPM free speed supports efficient cutting action when paired with properly rated carbide burrs or mounted wheels.
• 1/4" 300 Series collet accepts common industrial shank accessories for die grinding and finishing work.
• Front exhaust layout directs air forward, which can be useful when working at benches, inside fixtures, or near hose routing points.
• Balanced aluminum housing helps reduce handling strain during detailed grinding and cleanup operations.
• Applicable collet and collet wrenches are supplied as standard equipment for setup and accessory changes.

Made in USA:

Applications:

• Die and mold work — reaching into pockets, contours, and recesses for light grinding, burr cleanup, and edge refinement.
• Aerospace and composite shops — controlled deburring and trimming support on components where compact reach and balance matter.
• Metal fabrication — cleaning weld edges, removing small burrs, and blending localized surface imperfections with mounted accessories.
• Toolroom and fixture maintenance — working around jigs, fixtures, and tooling details where standard-length grinders may not fit comfortably.
• Automotive and repair shops — gasket surface cleanup, casting flash removal, and general shank-mounted abrasive work when accessory speed ratings match the tool.

FAQs:

• Q: What accessories can be used with the Dotco 10L1101-36?
  A: This model uses a 1/4" 300 Series collet and is rated for a 1/2" carbide burr or 1" mounted wheel. Always confirm the accessory shank size, diameter, and maximum RPM before mounting it on the tool.
• Q: What does the 5" extended housing help with?
  A: The extended housing gives the operator extra reach into recessed areas, molds, fixtures, and components where a shorter inline die grinder may not provide enough access.
• Q: Is 28,000 RPM suitable for every burr or mounted wheel?
  A: No. The accessory’s maximum operating speed must equal or exceed 28,000 RPM. Do not use accessories with a lower speed rating than the grinder.
• Q: What air hose size should be used?
  A: The catalog specifies a minimum hose I.D. of 1/4" / 6.4 mm. Use properly sized air supply components and clean, regulated air at the rated operating pressure.
• Q: What is the benefit of front exhaust on this grinder?
  A: Front exhaust sends air away from the rear of the tool, which can help reduce exhaust flow toward the operator’s hand and hose connection during bench or fixture work.

Looking for more information about Dotco Grinder? Click here to view the Catalog

Need help selecting the correct Dotco Grinders for your application? Please call (800) 608-5210 or email info@intlairtool.com