Built for controlled fastening in production assembly, the Cleco CLBA083 CellClutch Cordless Electric Nutrunner combines a compact right-angle head with programmable rundown control for fastening jobs where torque repeatability matters more than raw impact force. Its 1.6–5.9 ft-lbs torque range supports light-to-medium assembly joints, while the 915 RPM free speed helps operators run down fasteners quickly before the clutch reaches the set torque. The 3/8" square drive accepts compatible square-drive sockets, and the right-angle configuration helps reach bolts positioned close to housings, brackets, panels, and other obstructions.
CellClutch tools offer programmable fastening strategies, standard batch counting, and on-tool feedback for OK/NOK rundown status. A nutrunner is a torque-controlled assembly tool used to tighten threaded fasteners to a repeatable target; the CellClutch system adds cordless mobility without requiring an air hose at the workstation. Please note that this listing is for the tool only; the cordless battery and charger are not included and must be purchased separately.
Please note that this listing is for the tool only; the Cordless Battery and Charger are not included and must be purchased separately.
Type: Cordless Electric Nutrunner | Series: CellClutch | Model: CLBA083 | Configuration: Right Angle | Drive Size: 3/8" Square | Torque Range: 1.6–5.9 ft-lbs | Torque Range: 2.2–8 Nm | Free Speed: 915 RPM | Length: 17.8" | Side to Center: 0.5"
Features:
- Easily programmable speeds and multi-stage rundowns help reduce fastening errors and improve repeatability on assembly workstations.
- Proven Cleco Clutch provides controlled torque shutoff for production fastening where consistent clamp load is required.
- Operator status light gives visual feedback for rundown and batch count status, helping users identify OK/NOK results quickly.
- Multi-color LED work light illuminates the fastener area while providing secondary OK/NOK operator feedback.
- Programmable rundown strategies help reduce cross-threading and repeated fastening errors by controlling speed and sequence.
- Single cordless battery platform reduces tool setup complexity across compatible Cleco cordless assembly tools.
- Right-angle head improves access to fasteners near brackets, fixtures, panels, and tight assembly clearances.
Note: Cordless Battery and Charger Sold Separately. Batteries and Chargers can be purchased from the following links:
Batteries:
Chargers:
Made in USA: 
Applications:
- Automotive assembly — controlled tightening of small brackets, interior components, covers, and light-duty threaded fasteners.
- Aerospace and precision manufacturing — repeatable fastening in areas where controlled rundown feedback and right-angle access are valuable.
- Appliance and electronics assembly — fastening panels, housings, subassemblies, and hardware where batch counting can help verify completed work.
- Agriculture and off-road equipment production — installing smaller hardware on assemblies, guards, panels, and component brackets.
- Industrial assembly cells — cordless nutrunner use at workstations where removing air hoses can improve mobility and reduce line clutter.
FAQs:
- Q: Does the Cleco CLBA083 include a battery and charger?
A: No. This listing is for the tool only. The cordless battery and charger must be purchased separately. - Q: What does CellClutch mean?
A: CellClutch refers to Cleco’s cordless assembly tool platform with programmable torque control, rundown strategies, status feedback, and standard batch counting for production fastening. - Q: What type of fasteners is the 1.6–5.9 ft-lbs torque range suited for?
A: This torque range is best matched to smaller assembly fasteners and light-to-medium joints. It is not a breakaway impact tool for removing seized bolts. - Q: Why choose the right-angle version instead of a pistol-style nutrunner?
A: A right-angle nutrunner reaches fasteners positioned near panels, fixtures, housings, or other obstructions where a straight or pistol tool may not fit cleanly. - Q: Can this tool be used without a controller?
A: Yes. The CellClutch platform supports on-tool programming for rundown setup, while compatible software and connectivity options may be used where additional setup or reporting is required.
| SKU | Torque Range | Free Speed (rpm) | Weight | ||||
|---|---|---|---|---|---|---|---|
| Min Nm | Max Nm | Min Ft Lb | Max Ft Lb | Lb | kg | ||
| CLBA083 | 2.2 | 8 | 1.6 | 5.9 | 915 r/min | 3.3 | 1.5 |
| CLBA123 | 3.3 | 12 | 2.4 | 8.8 | 650 r/min | 3.3 | 1.5 |
| CLBA203 | 8.3 | 21 | 6.1 | 15.5 | 360 r/min | 3.9 | 1.8 |
| CLBA303 | 8.3 | 30 | 6.1 | 22.1 | 255 r/min | 3.9 | 1.8 |
| CLBA403 | 15.1 | 41 | 11.1 | 30.2 | 185 r/min | 4.1 | 1.9 |
| CLBA653 | 15.9 | 65 | 11.7 | 47.9 | 115 r/min | 4.3 | 2 |
Looking for more information about Cleco Cordless Electric Nutrunner? Click here to view the Catalog
Need help selecting the correct Cleco Cordless Electric Nutrunners for your application? Please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
