Cleco 3060AVL-09 Vertical Grinder | 3060 Series | Aluminum Housing | 3.0 HP | 6,000 RPM | Side Exhaust

Built for aggressive weld grinding, casting cleanup, and heavy stock removal, the Cleco 3060AVL-09 vertical grinder combines a 3.0 HP governed air motor with a controlled 6,000 RPM free speed to keep large abrasive wheels working steadily under load. This 3060 Series model is configured for a 9" Type 27 grinding wheel, giving fabrication crews, foundries, ship repair teams, and industrial maintenance departments the wheel capacity needed for broad-surface metal removal.

The vertical body format helps the operator apply downward pressure with better control than smaller hand grinders, while the side exhaust directs spent air away from the work surface. An aluminum housing helps manage tool weight without changing the tool’s intended use in demanding pneumatic grinding environments. The 5/8"-11 external spindle supports common threaded grinding wheel hardware used with compatible 9" Type 27 accessories.

Type: Vertical Grinder | Series: 3060 Series | Model: 3060AVL-09 | Motor: 3.0 HP | Free Speed: 6,000 RPM | Abrasive Capacity: 9" Type 27 | Spindle Size: 5/8"-11 External | Housing Material: Aluminum | Exhaust: Side | Air Inlet Size: 1/2" | Minimum Hose I.D.: 3/4" 

Features:

• Powerful, governed motor helps maintain usable grinding speed during material removal.
• 9" Type 27 abrasive capacity supports broad contact grinding on welds, plate edges, and fabricated metal surfaces.
• Vertical grinder configuration gives operators a stable grip position for controlled downward grinding pressure.
• Side exhaust helps direct air discharge away from the grinding path and operator work zone.
• Aluminum housing provides a practical balance of strength and manageable tool weight.
• 5/8"-11 external spindle fits compatible threaded grinding wheel hardware.
• Standard equipment includes wheel guard, adapters, spindle wrenches, operating instructions, and service manuals.

Made in USA:

Applications:

• Welding and fabrication shops — grinding weld beads, beveling plate edges, and removing excess metal after fit-up.
• Foundries and casting cleanup — removing gates, risers, flash, and surface imperfections from metal castings.
• Ship repair and structural steel work — surface preparation and heavy grinding on large steel sections.
• Industrial maintenance and MRO — dressing worn components, cleaning repair areas, and preparing metal for rework.
• Truck, trailer, and equipment repair — grinding brackets, frames, and fabricated repair sections where a 9" wheel is appropriate.

FAQs:

• Q: What grinding wheels fit the Cleco 3060AVL-09?
  A: This model is specified for 9" Type 27 abrasive wheels with compatible 5/8"-11 mounting hardware. Always verify wheel type, diameter, arbor or threaded attachment, and maximum RPM before installation.
• Q: What does a governed motor do on a vertical grinder?
  A: A governed motor helps control tool speed under load. In grinding work, that helps the abrasive wheel maintain a more consistent cutting action instead of dropping speed excessively as pressure increases.
• Q: How much air supply does this grinder require?
  A: Cleco rates this tool’s performance at 90 PSI and specifies a minimum 3/4" hose I.D. Use a properly sized compressor, hose, couplers, and FRL setup so the grinder receives enough airflow at the tool inlet.
• Q: Is this the right grinder for light deburring or small parts?
  A: Usually no. The 3060AVL-09 is a 3.0 HP vertical grinder with 9" abrasive capacity, so it is better suited to larger metal removal work. For small burrs, edges, and confined areas, a die grinder or angle die grinder is typically a better match.
• Q: Does the tool include a guard and wrenches?
  A: Yes. Cleco lists wheel guard, adapters, spindle wrenches, operating instructions, and service manuals as standard equipment for the 3060 Series vertical grinder.

Looking for more information about Cleco Grinder? Click here to view the Catalog

Need help selecting the correct Cleco Grinders for your application? Please call (800) 608-5210 or email info@intlairtool.com